Collection stick


Revision as of 04:55, 23 August 2013 by Quozl (Talk | contribs)
Jump to: navigation, search


A Collection stick is a USB drive with a program on it that collects data in order to request developer keys. Developer keys are the unique cryptographic signatures for XO laptops that permit access to the system firmware.

What you will need:

  • a USB drive, preferably FAT formatted, does not need to be empty,
  • a computer with Internet access, and;
  • the group of XO laptops, which may be nearby or distant.

What you do is:


On the computer with Internet access:

  1. Insert the USB drive,
  2. Delete any file with name laptops.dat left over from previous use,
  3. Delete any directory with name boot,
  4. Create a new directory with name boot in the top level of your USB drive.
  5. Download and into that boot directory.

You should now have a USB drive containing a directory boot which contains two files, and This is a collection stick ready to use.


For each XO in the group:

  • make sure the laptop is off, (e.g. check for a blinking power indicator),
  • plug the USB drive into the laptop,
  • turn on the laptop,
  • wait about ten seconds for a short message that looks like this:
SHC016013D1 2016053T104955Z
Laptop data recorded successfully.
Powering off ...
  • wait for the laptop to turn off,
  • remove the USB drive from the laptop.

(The collection stick may do nothing if the laptop is unlocked already, hold the '×' game pad key to force "secure" booting.)

When you have done this on all the XOs you need keys for, move to the next step below.

Request keys

Plug the USB drive into the computer with Internet access.

For individuals and small groups:

  • open laptops.dat and you will find one line for each laptop, with three values separated by spaces; the first is a serial number, the second is a UUID, and the third is the date and time from the laptop clock,
  • visit the web page OLPC Activation Service, and enter the serial number and the UUID, and click on Request developer key,
  • follow the instructions on that web page to download the developer key,
  • add each of the developer keys into a new file, and name it develop.sig.

For larger groups:

  • attach the laptops.dat file from the USB drive to an email to your OLPC or deployment contact.

For small requests, the response from the OLPC Activation Service will be either:

  • 24 hours, if this is the first request for a laptop, or;
  • immediate, if a request was already made for a laptop.

For larger requests, the response from OLPC may take several days.

Receive keys

You will receive back one or two files from OLPC after submitting your laptops.dat file.

  1. If you requested a developer key: You will get a file called develop.sig. It contains a developer key for each laptop.
  2. If you requested an activation key: You will get a file called lease.sig. It contains an activation key for each laptop.

You are now ready to make an unlock stick.

Unlock stick

  1. Insert a USB drive (this can be the Collection stick; but you must rename the boot directory to something else like collection. If you don't do this, your laptop will just re-run the collection.)
  2. If you have a file called develop.sig, make a directory called security at the top of your USB drive and copy this file into it.
  3. If you have a file called lease.sig, copy this file into the top of your USB drive.

You should now have a USB drive containing either a directory security which contains develop.sig, or lease.sig in the top of the drive. This is an unlock stick ready to use.


For each XO in the group:

  1. Make sure the XO is powered off.
  2. Plug the USB drive into the XO, then power it on.

That's it! Note that this process only unlocks your XO for one boot - if you want to unlock your XO permanently without needing to plug in the USB drive every time you boot, see #Permanently unlocking with an Unlock stick.

Activation keys

No action is required. Activation keys are automatically copied to /security/lease.sig on your XO. Keep the activation key around (or copy it to your School Server) in case you later need to reflash the XO.

Developer keys

When the XO boots the first time, you should see a textual prompt, which you will see within the first few seconds of booting (along with a short countdown to give you time to hit the File:Esc.png, Escape key). This is your indication that the Developer key on the Unlock stick has been found.

Permanently unlocking with an Unlock stick

To permanently disable secure booting on each laptop, add this text to a file olpc.fth in the boot directory on the Unlock stick:

\ Open Firmware

Then insert the USB drive into each laptop and turn it on. Watch. The laptop will reboot once or twice. Wait for the Ok prompt to appear on screen. The laptop is now unlocked permanently.

It works like this; when the laptop turns on, it searches for the security/develop.sig file, validates it, then switches to unsecure mode, then searches for the boot/olpc.fth file and runs it. The boot/olpc.fth contains the disable-security command, which disables the security system and reboots. One the second boot, with the security system already disabled, disable-security does nothing, and so the Ok prompt appears.

You can also do this manually by inserting the Unlock stick, obtaining the Ok prompt, and then typing disable-security once or twice. See Activation and developer keys for more detail.

Once you do this, you will not need the Developer key on the laptop, but you can keep it in case security is ever enabled.

Remote Support

See the remote support procedure for unlocking a laptop.

When providing remote support for the owner of a laptop, properly creating directories and files may be a challenge. To alleviate this, prepare a .zip file for them to unpack onto their USB drive:

  • make a directory to work in,
  • make the directories and files that they would have to make,
  • make a .zip of the working directory,
  • check the .zip file carefully,
  • send the file and ask the owner to expand it on a USB drive, insert it in the laptop, power on, and tell you what happens.

For example: we made, with boot and security directories, with the, and olpc.fth files already properly placed. It can be used as part of an e-mail exchange with an owner. See how to use it.

Unlocking only until the next reinstall or upgrade

The firmware checks for the Developer key on all available storage, which is why an Unlock stick works the way it does. But this means you would need to keep the Unlock stick handy to use it.

Alternatively, you can copy Developer key to your laptop's internal flash memory. Copy security/develop.sig from the USB drive into /security/develop.sig on the XO. In a Terminal activity type:

sudo cp /run/media/olpc/USBDRIVE/security/develop.sig /security/develop.sig

Where USBDRIVE is the volume label of the USB drive.

  • (Note that /media was used instead of /run/media/olpc before 12.1.0).

See Also

Personal tools
  • Log in
  • Login with OpenID
About OLPC
About the laptop
About the tablet
OLPC wiki