Learning activities/Hardware Mods
Notes from Nigeria 5/07
Today, we went to their neighborhood local stores and shops to look for materials we could use in our effort to keep the XOs from falling [off the desks] so much. Then I explained to the whole class that we were going to try out different ideas on the XOs and that they had to help us telling which ones worked best... So far
Surgical gloves: not working. They break. We tried different ways. Also, the material is too thin.
The net-kind-of-thing to shower with: it's easy to place and remove, it doesn't need glue. It's not as anti-slip as other materials.
The electrical tape: easy to place and remove. Not as anti-slip as other materials. We also combined it with other methods.
The erasers: They are small. They are glued to the bottom corners. Erasers are so anti-slip, though,that every time you rub them they tend to leave a piece of themselves on the surfaces. Will get smaller and smaller over time. We tried different sizes and shapes on different XOs.
Motorbike tube: It's not expensive, could be used for many. Very anti-slip. We placed them in different parts, with different designs.
The fastener: Very anti-slip.
--Carla Gomez Monroy, Learning Consultant, OLPC
Task: Adapt This Story
Help adapt this story into a learning activity for children around the world.
What kinds of activities do we want? Read our educational activity guidelines to understand our vision for learning. Or, take a look at some sample learning activities to get a sense of what we're looking for.
Does this activity look good to you? Try it in your classroom and use the discussion page to tell us how it went. Or, use one of our activity templates to create a related activity and link to it below.
Activity: Lo-fi Hardware Mods
Commentary: Lo-fi Hardware Mods
Comments, feedback, links to other classes using this activity.