Talk:Adding USB SVGA

From OLPC

Revision as of 15:35, 28 December 2008 by Jpritikin (Talk | contribs)
(diff) ← Older revision | Current revision (diff) | Newer revision → (diff)
Jump to: navigation, search

The progress made here is great. Has anyone tried using the lower cost USB to VGA device that Magic Control Technology Corp manufacture? It uses a different chip to this one. JoshSeal 21:34, 1 February 2008 (EST)

Low Cost USB SVGA Adaptor

I've been trying to get an OLPC working with this SIIG 'USB 2.0 to VGA Adaptor' found here <http://www.siig.com/ViewProduct.aspx?pn=JU-000071-S1> but haven't had any luck yet. I rebuilt a custom kernel module on an OLPC running Build 703 (stable), however, I believe my USB SVGA adaptor is not compatible because is uses a different driver than this guide was written for. I would like to share my already compiled rpm if it would be useful for someone else trying to do this. It compiled without any fatal errors. I would appreciate it very much if someone with a "compatible adaptor" (according to this wiki) were willing to install it on their own OLPC and see if it works. Thanks!

Here's the link to the RPM. It was put in a tarball for uploading to the wiki.
OLPC Build 703 Kernel 2.6.26

Whizman 19:15, 8 August 2008 (UTC)

Recommended Resolution?

The projector ought to have what minimum resolution to display a decent approximation of the XO screen? Does 800x600 result in a blurry mess? Is 1024x768 enough? Jpritikin 15:34, 28 December 2008 (UTC)

Personal tools
  • Log in
  • Login with OpenID
About OLPC
About the laptop
About the tablet
Projects
OLPC wiki
Toolbox