Testcase Query Examples

From OLPC

Revision as of 20:32, 25 July 2013 by Patrol (Talk | contribs)
(diff) ← Older revision | Current revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Other ways to query for test cases than the query(s) on Test cases 8.2.0

Copy these to make your own.

Contents

Basics

The basic query is

 {{#ask: [[Category:Test cases]] [[Build stream::joyride|Any]]  | additional options }}

One option you should always add is |default=Query for xyz found nothing?!, otherwise you'll have no indication a page has a query that isn't working.

See Inline query output formats.


Query counting each test case

There are 166 total test cases in Category:Test cases.

There are 24 test cases in Category:Test cases with Property:Build stream of Joyride.

There are 114 test cases in Category:Test cases with Property:Build stream of 8.2.

There are 91 test cases in Category:Test cases with category Activity.

Querying for test results (problematic!)

This is tricky, because multipled test results are lumped into one test case page. See Semantic MediaWiki#Issues for test results.

Show any test case for 8.2.1 with a bug number or a fail but the failure may not be in 8.2.1 testing.

Short name Build stream PassFail Trac bug number Comments
Tests/Activity/Memorize Memorize Activity
Same side testing
FullFunctionTests
Extra clicks
Game finish
Non-matching pair
Value retention
Game Start
Reveal box
Matching pair
Any
8.2
8.2.1
Pass
Fail
memorize-27; successfully shared between two laptops on an AP. Still no win condition.
Memorize icon appears in activity donut and pulses during startup
Memorize activity opens properly
Memorize activity closes properly
Memorize icon disappears from the activity donut when activity closed
Journal entry for previous activity session appears
Clicking on Memorize journal entry restores activity to an appropriate state. FAIL because any pairs the player had revealed are lost and the user must start playing from scratch again.
Addition opens properly
Letters opens properly
Sounds opens properly
4x4 produces the correct grid
5x5 produces the correct grid
6x6 produces the correct grid
4x4 grid allows only valid squares to highlight and be chosen

for the 1st part of a turn
4x4 grid allows only valid squares to highlight and be chosen for the 2nd part of a turn
5x5 grid allows only valid squares to highlight and be chosen for the 1st part of a turn
5x5 grid allows only valid squares to highlight and be chosen for the 2nd part of a turn
6x6 grid allows only valid squares to highlight and be chosen for the 1st part of a turn
6x6 grid allows only valid squares to highlight and be chosen for the 2nd part of a turn
Sounds game only allows valid squares to highlight and be chosen
Testing that selected squares are always recognised and handled correctly as valid or invalid. Combination tested: Addition 4x4 valid
Testing that selected squares are always recognised and handled correctly as valid or invalid. Addition 5 invalid
Testing that selected squares are always recognised and handled correctly as valid or invalid. Addition 6 valid
Testing that selected squares are always recognised and handled correctly as valid or invalid. Letters 4 invalid
Testing that selected squares are always recognised and handled correctly as valid or invalid. Letters 5 valid
Testing that selected squares are always recognised and handled correctly as valid or invalid. Letters 6 invalid
Testing that selected squares are always recognised and handled correctly as valid or invalid. Sounds 4 valid
Testing that selected squares are always recognised and handled correctly as valid or invalid. Sounds 5 invalid
Testing that selected squares are always recognised and handled correctly as valid or invalid.

Sounds 6 valid
A new random game is produced (using new game icon in top left corner)
The ‘pair’ images disappear from the left when a new game is started
Win with 4x4 grid playing addition
Win with 5x5 grid playing letters
Win with 6x6 grid playing Sounds
Activity opens and creates new game, icon appears in Activity Doughnut
Difficulty of (4x4) is selected and new games loads with 4x4
Load Demo of addition is selected and new game is created.
When game of 4x4 addition is completed there is no sign or notification that the game has been completed, all the tiles are face up and highlighted purple but nothing else notifys the user that they were successful or that the game is over
Activity is closed successfully and icon is removed from activity doughnut
Tests/Activity/Memorize/FullTest FullFunctionTests 8.2.1 Pass
Fail
Activity opens and creates new game, icon appears in Activity Doughnut
Difficulty of (4x4) is selected and new games loads with 4x4
Load Demo of addition is selected and new game is created.
When game of 4x4 addition is completed there is no sign or notification that the game has been completed, all the tiles are face up and highlighted purple but nothing else notifys the user that they were successful or that the game is over
Activity is closed successfully and icon is removed from activity doughnut
Tests/Activity/Memorize/FullTest3 FullFunctionTest, Sequence 3 8.2.1 Fail
Pass
Activity opens but previous games state is lost. Icon appears in Activity Doughnut
When 6x6 is selected as the diffculty and the game type is selected as sounds a new game is loaded and displayed
When 2 pieces are correctly matched they stay face up and gain a purple border.
When game of 6x6 sounds is completed there is no sign or notification that the game has been completed, all the tiles are face up and highlighted purple but nothing else notifys the user that they were successful or that the game is over
Activity is closed successfully and icon is removed from activity doughnut
Tests/Network/XO/WEP WEP Access Point connection 8.2
11.2
Any
Joyride
Staging
8.2.1
Pass 92239,223 no problems
Started with cleaninstall of gg-766-3.
started with cleaninstall
It worked the second time I clicked on it and added the passphrase (ascii). Going back and forth between this and other APs, this one connects without asking for passphrase again and is pretty quick.
used olpc-update on build 25 to candidate-800, and network via WEB works first reboot
Tests/SmokeTest/Activities Activities 8.2.1
11.2
Any
8.2
Fail
Pass
87388,738 measure not working
everything on track
Signed clean-install of 766.
olpc-update candidate-766

saw a bug where some older items were at the top of the journal queue despite not being worked in for quite some time. newer items were showing up below these. haven't reproduced yet.
All work as described.

Scratch can save to Project and Subfolders
smoke testing firmware q2e21
Firmware q2e29a, software build os24.img


Query displaying each test case

If the pages you are including are small, you can embed them with format=embedded. This is like transcluding each page with {{:Title of page}} {{:Another page}} ..., but dynamic. This can confuse editors, and it puts the page that uses it into any categories in the embedded pages!

The example below is limited to three results

Tests/Activity/Calculate/SquareTest

Obsolete, refer to [1].


Test case: square
How to report results

Stream
Category Activity Sub-category calculate
Component numbers
Feature Tests/Activity/Calculate/SquareTest
Objective passed
Tools calculater and numbers
Setup
Procedure #turn on the calculator.
  1. click on 2 button.
  2. click on x^2 button.
  3. click on = button.
Expected Results
and Pass Criteria
number 4.
Comments test has passed.
Release Stream Build Pass/Fail Trac Ticket(s) Comment(s) Date of Test
7.1.0 (650) joyride Pass


Tests/Activity/CalculateTests

This Calculate Tests page is an amalgamation of test of the Calculate feature tests. Most of the tests date from 2009.


Calculate Activity Test

Test case: Calculate Activity
How to report results

Stream Any
Category Activity Sub-category Calculate
Component Calculate
Feature http://wiki.laptop.org/go/Calculate
Objective basic activity testing
Tools n/a
Setup n/a
Procedure # Activity installs from download (if not part of default installation) from website or USB key
  1. Activity starts up
  2. You can re-name the activity
  3. User specific data can be created
  4. You can force a save
  5. Activity closes properly from inside the activity
  6. You can resume the activity from the Journal
  7. You see the user specific data after resume
  8. You can close the activity from the Sugar frame
Expected Results
and Pass Criteria
Comments
Release Stream Build Pass/Fail Trac Ticket(s) Comment(s) Date of Test
Candidate 8.2 760 Pass calculate-24




Calculate CosSin Test

Test case: cossin
How to report results

Stream
Category Activity Sub-category calculate
Component numbers
Feature http://wiki.laptop.org/go/Calculate
Objective passed
Tools calculator and numbers
Setup
Procedure 1. turn on the calculator.

2. type cos(sin(1)). 3. click on = button.

Expected Results
and Pass Criteria
number 0.6663
Comments test has passed.
Release Stream Build Pass/Fail Trac Ticket(s) Comment(s) Date of Test


Calculate Plus Test

Test case: FourArithmeticOperationsTest
How to report results

Stream 8.2
Category Activity Sub-category Calculate
Component Calculate
Feature http://wiki.laptop.org/go/Calculate
Objective
Tools n/a
Setup n/a
Procedure 1. Run the Calculate Activity on XO machine

2. Test invalid inputs for the fours arithmetic operations 3. Test valid inputs for the fours arithmetic operations

Expected Results
and Pass Criteria
1. When test the invalid inputs,like letters, the calculation should do not work out.

2. When test the valid inputs, the calculation should work out well, except any number divided by 0 (any number / 0), since it should be undefined for division.

Comments The following is the case sequence to test the four arithmetic operations(addition, subtract, multiply, division ):
 input1 (pos, neg, 0, invalid(a-z)), input2 (pos, neg, 0, invalid(a-z)) ,operations(+,-,*,/)

We build 14 tests for this test case by pairwise.

Release Stream Build Pass/Fail Trac Ticket(s) Comment(s) Date of Test
Candidate 8.2 2 Pass TestInvalidInputs:

When we test by inputing the invalid variables, we expect that the calculation should not do. For example, when input1 is a, and input2 is 1, then the calculation should do not work out for a + 1.

The invalid inputs values are from a to Z.

2009/03/26


Candidate 8.2 12 Pass TestValidInputs:

The valid inputs values are numbers, and truth values(true and false). However, we just test the numbers as the inputs for the test case. We need do more tests to verity truth values for the fours arithmetic operations.

2009/03/26




Calculate Square Test

Test case: square
How to report results

Stream
Category Activity Sub-category calculate
Component numbers
Feature Tests/Activity/Calculate/SquareTest
Objective passed
Tools calculater and numbers
Setup
Procedure #turn on the calculator.
  1. click on 2 button.
  2. click on x^2 button.
  3. click on = button.
Expected Results
and Pass Criteria
number 4.
Comments test has passed.
Release Stream Build Pass/Fail Trac Ticket(s) Comment(s) Date of Test
7.1.0 (650) joyride Pass



Calculate Clear Test

Test case: clear
How to report results

Stream
Category Activity Sub-category calculate
Component numbers
Feature http://wiki.laptop.org/go/Calculate
Objective passed
Tools calculator and numbers
Setup
Procedure 1. turn on the calculator.

2. click on any number. 3. click on clear button.

Expected Results
and Pass Criteria
screen is clear.
Comments test has passed.
Release Stream Build Pass/Fail Trac Ticket(s) Comment(s) Date of Test


Calculate Log Test

Test case: log
How to report results

Stream
Category Activity Sub-category calculate
Component numbers
Feature http://wiki.laptop.org/go/Calculate
Objective passed
Tools calculator and numbers
Setup
Procedure 1. turn on the calculator.

2. click on 2 button. 3. click on log button. 4. click on = button.

Expected Results
and Pass Criteria
number 0.3010
Comments test has passed.
Release Stream Build Pass/Fail Trac Ticket(s) Comment(s) Date of Test


Calculate Subtraction Tests

Test case: subtraction
How to report results

Stream
Category Activity Sub-category calculate
Component numbers
Feature http://wiki.laptop.org/go/Calculate
Objective passed
Tools calculator and numbers
Setup
Procedure 1. turn on the calculator.

2. click on number 5. 3. click on - button. 4. click on number 2. 5. click on = button.

Expected Results
and Pass Criteria
number 2.
Comments test has passed.
Release Stream Build Pass/Fail Trac Ticket(s) Comment(s) Date of Test



Calculate Turn On Test

Test case: turnon
How to report results

Stream
Category Activity Sub-category calculate
Component numbers
Feature http://wiki.laptop.org/go/Calculate
Objective passed
Tools calculator and numbers
Setup
Procedure 1. click on the calculator icon on the desktop of OLPC laptop.

2. check whether application is opening or not. 3. type some numbers on the screen.

Expected Results
and Pass Criteria
calculator screen is open.
Comments test has passed.
Release Stream Build Pass/Fail Trac Ticket(s) Comment(s) Date of Test


Calculate Tan Test

Test case: tan
How to report results

Stream
Category Activity Sub-category calculate
Component numbers
Feature http://wiki.laptop.org/go/Calculate
Objective passed
Tools calculator and numbers
Setup
Procedure 1. turn on the calculator.

2. click on number 1. 3. click on tan button. 4. click on = button.

Expected Results
and Pass Criteria
number 1.5574
Comments test has passed.
Release Stream Build Pass/Fail Trac Ticket(s) Comment(s) Date of Test


Calculate Multiplication Test

Test case: multiplication
How to report results

Stream
Category Activity Sub-category calculate
Component numbers
Feature http://wiki.laptop.org/go/Calculate
Objective passed
Tools calculator and numbers
Setup
Procedure 1. turn on the calculator.

2. click on 2 button. 3. click on * button. 4. click on 3 button. 5. click on = button.

Expected Results
and Pass Criteria
number 6.
Comments test has passed.
Release Stream Build Pass/Fail Trac Ticket(s) Comment(s) Date of Test


Calculate Cube Test

Test case: cube
How to report results

Stream
Category Activity Sub-category calculate
Component numbers
Feature http://wiki.laptop.org/go/Calculate
Objective passed
Tools calculator and numbers
Setup
Procedure 1. turn on the calculator.

2. click on 2 button. 3. click on x^3 button. 4. click on = button.

Expected Results
and Pass Criteria
number 8.
Comments test has passed.
Release Stream Build Pass/Fail Trac Ticket(s) Comment(s) Date of Test


Calculate Addition Test

Test case: addition
How to report results

Stream
Category Activity Sub-category addition
Component calculator and numbers
Feature http://wiki.laptop.org/go/Calculate
Objective addition of numbers
Tools calculator and numbers
Setup
Procedure 1. turn on the calculator.

2. click on 1 button. 3. click on + button. 4. click on 2 button. 5. click on = button

Expected Results
and Pass Criteria
number 3.
Comments test has passed.
Release Stream Build Pass/Fail Trac Ticket(s) Comment(s) Date of Test


Calculate SinCos Test

Test case: sincos
How to report results

Stream
Category Activity Sub-category calculate
Component numbers
Feature http://wiki.laptop.org/go/Calculate
Objective passed
Tools calculator and numbers
Setup
Procedure 1. turn on the calculator.

2. type sin(cos(1)). 3. click on = button or ans button.

Expected Results
and Pass Criteria
number 0.5143.
Comments test has passed.
Release Stream Build Pass/Fail Trac Ticket(s) Comment(s) Date of Test

Calculate Cos Test

Test case: cos
How to report results

Stream
Category Activity Sub-category calculate
Component numbers
Feature http://wiki.laptop.org/go/Calculate
Objective passed
Tools calculator an dnumbers
Setup
Procedure 1. turn on the calculator.

2. click on number 2. 3. click on cos button. 4. click on = button.

Expected Results
and Pass Criteria
number 0.5403
Comments test has passed.
Release Stream Build Pass/Fail Trac Ticket(s) Comment(s) Date of Test
Pass alsdfjasjsadlfksaflsdfkaslfdds



Calculate Algebra and Constant Test

Test case: AlgebraAndConstantTest
How to report results

Stream 8.2
Category Activity Sub-category Calculate
Component Calculate
Feature http://wiki.laptop.org/go/Calculate
Objective Test three functions for the algebra feature, also test the constants of the Calculate activity
Tools n/a
Setup n/a
Procedure 1. Open the XO machine

2. Run the Calculate Activity on XO machine

3. Test invalid inputs for algebra operation

4. Test valid inputs for algebra operation. Constants are checked and used as valid inputs.

Expected Results
and Pass Criteria
When using invalid inputs like letters, it is expected that the tests to fail by informing the user with an error message.

When using valid inputs, it is expected that the tests will pass by returning the correct values.

Comments The following is the test suite for algebra and constant test:
inputs(invalid, int, double, constants), sign(+,-), algebra(x!,x^2,root(x))

Base on Pairwise, we count and build 9 test cases, and 1 test case by Myer's. We check the constants(pi, e) and use it by putting them as input values. We just test three of algebra operations, which are x!, x^2, root(x).More tests are needed to cover the other functions of the algebra feature.

Release Stream Build Pass/Fail Trac Ticket(s) Comment(s) Date of Test
Candidate 8.2 1 Pass TestInvalidInputs:

We can not input letters(a-Z) to do algebra operation.

2009/03/26


Candidate 8.2 9 Pass TestValidInputs:

When the input number is negative, root(x) of algebra operation produce error as expected. When a double input is used for x!, the result is zero.

2009/03/26


Boolean and Label Test

Test case: BooleanAndLabelTest
How to report results

Stream 8.2
Category Activity Sub-category Calculate
Component Calculate
Feature http://wiki.laptop.org/go/Calculate
Objective Test the boolean and the label features for the Calculate activity
Tools n/a
Setup n/a
Procedure 1. Open the XO machine

2. Run the calculate activity on XO machine

3. Test invalid inputs

4. Test valid inputs

Expected Results
and Pass Criteria
When testing invalid inputs, it was expected that tests will fail by informing the user by an error message.

When testing valid inputs, it was expected that tests will pass returning the correct values.

Comments The following is the test sequence for testing boolean feature(And, Or, Equal, Not Equal) and creating label:
input1(true, false, number, invalid), input2(true, false, number, invalid),
boolean operators (AND(&), OR , EQUAL(=), NOT EQUAL(!=)),
label (valid labels, invalid, no labels)

Based on Pairwise, we use TConfig to count and produce 12 test cases. In addition, based on Myer's, we build 3 test cases for invalid inputs for the test suite.

Release Stream Build Pass/Fail Trac Ticket(s) Comment(s) Date of Test
Candidate 8.2 3 Pass TestInvalidInputs:

The invalid inputs for boolean features are letters from a to z. The invalid inputs for label name are only symbols(&,+,=,and so on), numbers(1,2,...), and truth value(true, false). We can name labels by these invalid values, but once you call these labels, then we can not get the value of these labels stand for. The calculation still work out, but the result is not right as you expect to get. We think here is a bug for label.However, We have not done any test for calling invalid label in this test suite. Therefore, more tests are needed.

2009/03/26


Candidate 8.2 12 Pass TestValidInputs:

The valid inputs for boolean feature are numbers(0,1,2,...) and truth value(true, false). The valid inputs for label name are letters or combination of letters and numbers.

2009/03/26



Calculate Four Arithmetic Operations Tests

Test case: FourArithmeticOperationsTest
How to report results

Stream 8.2
Category Activity Sub-category Calculate
Component Calculate
Feature http://wiki.laptop.org/go/Calculate
Objective Test the calculate activity basic functionalities
Tools n/a
Setup n/a
Procedure 1. Open the XO machine.

2. Run the Calculate Activity on XO machine.

3. Test invalid inputs for the four arithmetic operations.

4. Test valid inputs for the four arithmetic operations.

Expected Results
and Pass Criteria
1. When testing the invalid inputs, it is expected that tests will fail by returning some error message telling the user what went wrong.

2. When testing the valid inputs, it is expected that tests will pass by returning the right value.

Comments The following is the case sequence to test the four arithmetic operations(addition, subtract, multiply, division ):
input1(pos, neg, 0, invalid(a-z)), input2(pos, neg, 0, invalid(a-z)) ,operations(+,-,*,/)

We build 12 test cases using pairwise method and 2 test cases using Myer's method.

Release Stream Build Pass/Fail Trac Ticket(s) Comment(s) Date of Test
Candidate 8.2 2 Pass TestInvalidInputs:

When we test by inputting the invalid variables, we expect that the calculation should not work. For example, when input1 is a, and input2 is 1, then the calculation should not work out for a + 1.

The invalid inputs values are from a to z.

2009/03/26


Candidate 8.2 12 Pass TestValidInputs:

The valid inputs values are numbers, and truth values(true and false). However, we just tested numbers as the inputs for the test cases. We do need more tests to verity truth values for the four arithmetic operations.

2009/03/26



Calculate Sin Test

Test case: sin
How to report results

Stream
Category Activity Sub-category calculate
Component numbers
Feature http://wiki.laptop.org/go/Calculate
Objective passed
Tools calculator and numbers
Setup
Procedure 1. turn on the calculator.

2. click on number 1. 3. click on sin button. 4.click on = button.

Expected Results
and Pass Criteria
number 0.8414
Comments test has passed.
Release Stream Build Pass/Fail Trac Ticket(s) Comment(s) Date of Test


Calculate Division Test

Test case: division
How to report results

Stream
Category Activity Sub-category calculate
Component numbers
Feature http://wiki.laptop.org/go/Calculate
Objective passed
Tools calculator and numbers
Setup
Procedure 1. turn on the calculator.

2. click on 6 button. 3. click on / button. 4. click on 2 button. 5. click on = button.

Expected Results
and Pass Criteria
number 3.
Comments test has passed.
Release Stream Build Pass/Fail Trac Ticket(s) Comment(s) Date of Test


== Calculate Square Root Test ==


Test case: squareroot
How to report results

Stream
Category Activity Sub-category calculate
Component numbers
Feature http://wiki.laptop.org/go/Calculate
Objective passed
Tools calculater and numbers
Setup
Procedure 1. turn on the calculator.

2. click on number 1. 3. click on number 6. 4. click on square root button. 5. click on = button.

Expected Results
and Pass Criteria
number 4.
Comments test has passed.
Release Stream Build Pass/Fail Trac Ticket(s) Comment(s) Date of Test


Calculate Turn Off Test

Test case: turnoff
How to report results

Stream
Category Activity Sub-category calculate
Component numbers
Feature http://wiki.laptop.org/go/Calculate
Objective passed
Tools calculator and numbers
Setup
Procedure 1. click on the exit button of the calculator application.

2. check whether the application is off or not.

Expected Results
and Pass Criteria
application is off.
Comments test has passed.
Release Stream Build Pass/Fail Trac Ticket(s) Comment(s) Date of Test

Tests/Activity/Chat

This Chat Tests page is an amalgamation of test of the Chat feature tests. Most of the tests date from 2009


Public Chat Test

Test case: Public Chat
How to report results

Stream 8.2, 11.2
Category Activity Sub-category Chat
Component Chat
Feature Chat
Objective Verify that users can start and participate in a public (visible to the neighborhood) chat.
Tools No test tools required.
Setup At least two laptops running the same version of Chat, preferably the most recent.
Procedure 1. Start up a Chat activity on one XO. Share it with the Neighborhood.

2. On the other XOs, go to the Neighborhood view and join the chat.
3. Send messages to the chat from all of the XOs.
4. Have one or more of the XOs (not the host) leave the chat for a few minutes, then rejoin.
5. Chat some more.
6. Have one of the non-host XOs leave the chat again.
7. Have the rest of the XOs (host included) leave the chat.

Expected Results
and Pass Criteria
1. When the XOs join the chat, the icon should appear with the colors of the host XO.

2. XOs can join the activity and chat reliably.
3. If the chat ends (everyone leaves), the icon should disappear from the Neighborhood view.

Comments None.
Release Stream Build Pass/Fail Trac Ticket(s) Comment(s) Date of Test
Candidate joyride 2311 Pass No unexpected behavior.


Candidate 8.2 763 Pass chat-47



Private Chat Tests

Test case: Private Chat
How to report results

Stream 8.2, 11.2
Category Activity Sub-category Chat
Component Chat
Feature Chat
Objective Verify that users can start and participate in a private (invite-only) chat.
Tools No test tools required.
Setup At least two laptops running the same version of Chat, preferably the most recent.
Procedure 1. On one XO, start up the Chat activity.

2. Switch to the Neighborhood view.
3. Find the other XO(s) being used for the test in the Neighborhood view and invite them to the chat by hovering the mouse cursor over their XO symbol and selecting the option with the appropriately-colored Chat icon.
4. On the other XO(s), a Chat icon with the colors of the first XO should appear in the frame.

  • In pre-8.2.0 builds, this icon will appear in the activity tray on the bottom of the screen in the home view or on the frame.
  • In joyride, 8.2.0 and beyond, this icon will flash once or twice in the top-left corner and then will stay in the top part of the frame in the list of active activities until the invitation is declined or the activity is stopped.

5. Select the "join" option or click on the icon to join the chat.
6. Chat.
7. Have one of the joining XOs leave the chat, then reinvite them from the host XO.
8. Join the chat again.
9. Leave the chat again on one of the XOs that joined the chat, then reinvite them from the host XO.
10. Have the other XOs (if any, including the host) leave the chat activity before the reinvited XO rejoins the chat.

Expected Results
and Pass Criteria
1. On the Neighborhood view, there should be no Chat icon representing the host visible anywhere.

2. XOs can join the activity and chat reliably.
3. If an XO declines an invite or leaves the chat, they can still be reinvited back to the chat.
4. If the chat ends before an invited XO joins, the invitation should disappear.

Comments None.
Release Stream Build Pass/Fail Trac Ticket(s) Comment(s) Date of Test
Candidate joyride 2311 Pass No unexpected behavior.


… further results

Bug: query for a disallowed value sometimes still works

Bug: if I query for a bogus value, it counts all of them. A query for Build stream==BADVALUE returns a count of 140

Personal tools
  • Log in
  • Login with OpenID
About OLPC
About the laptop
About the tablet
Projects
OLPC wiki
Toolbox