Tests/SmokeTest/Distance

From OLPC

< Tests
Revision as of 19:40, 9 February 2011 by Greenfeld (Talk | contribs)
(diff) ← Older revision | Current revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Test case: Distance
How to report results

Stream 8.2.1, 11.2, Any
Category SmokeTest Sub-category Distance
Component warning.pngEmpty strings are not accepted.
Feature warning.pngEmpty strings are not accepted.
Objective Get 2 XOs running the distance activity
Tools 2 XO units
Setup warning.pngEmpty strings are not accepted.
Procedure Actions
  1. On both XO's click on the same network (whatever is available) in each of their network views; confirm they are both connected
  2. Open Distance with one XO
  3. Share the activity with the neighborhood
  4. Go to the Network view of that XO
  5. Go to the Network view of the second XO
  6. In the network view of the second XO click on the distance activity that the first one just shared
  7. On the first XO press the check key on the game pad to start measuring the distance
  8. Close the Distance activity
  9. Follow the same steps, but starting with the second XO (see that it works both ways)
Expected Results
and Pass Criteria
Verify
  • The shared Distance activity shows up in the mesh view of both laptops
  • The tiny circle with a check on the screen of both XOs should turn green
  • The first XO should make sounds after the check key is pressed
  • Both XOs should show the distance between each other on the screen
  • Distance works both ways
Comments warning.pngEmpty strings are not accepted.
Release Stream Build Pass/Fail Trac Ticket(s) Comment(s) Date of Test
Candidate 8.2 760 Pass warning.pngEmpty strings are not accepted. warning.pngThe date "" was not understood (support for dates is still experimental).


Candidate 8.2 762 Pass warning.pngEmpty strings are not accepted. warning.pngThe date "" was not understood (support for dates is still experimental).


Candidate 8.2 766 Pass Signed upgrade, fine both ways. warning.pngThe date "" was not understood (support for dates is still experimental).


Candidate 8.2 766 Pass olpc-upgrade candidate-766 lookin' good! warning.pngThe date "" was not understood (support for dates is still experimental).


Candidate 8.2 767 Pass used an XO that was usb upgraded from 656 to 767 and an XO clean installed with 767. worked great on mesh channel 11 warning.pngThe date "" was not understood (support for dates is still experimental).


Candidate 8.2 767 Pass using two copy-nand clean installed gg-767-4 machines on channel 6, worked great. warning.pngThe date "" was not understood (support for dates is still experimental).


8.2.0 (767) 8.2 767 Pass smoke testing new firmware q2e21, activity worked on both mesh11 and ml1cc. 2008/11/05


Facts about Tests/SmokeTest/DistanceRDF feed
Build number 760  +, 762  +, 766  +, and 767  +
Build stream 8.2.1  +info.pngLink to builds in stream, Packages in stream, ChangeLog, Differences vs joyride , 11.2  +info.pngLink to builds in stream, Packages in stream, ChangeLog, Differences vs joyride , Any  +info.pngLink to builds in stream, Packages in stream, ChangeLog, Differences vs joyride , and 8.2  +info.pngLink to builds in stream, Packages in stream, ChangeLog, Differences vs joyride
Comments warning.pngEmpty strings are not accepted. , Signed upgrade, fine both ways., olpc-upgrade candidate-766 lookin' good!, used an XO that was usb upgraded from 656 to 767 and an XO clean installed with 767. worked great on mesh channel 11, using two copy-nand clean installed gg-767-4 machines on channel 6, worked great., and smoke testing new firmware q2e21, activity worked on both mesh11 and ml1cc.
Created warning.pngThe date "" was not understood (support for dates is still experimental). , and 5 November 2008  +
More notes warning.pngEmpty strings are not accepted.
Pass criteria Verify
  • The shared Distance activity Verify
  • The shared Distance activity shows up in the mesh view of both laptops
  • The tiny circle with a check on the screen of both XOs should turn green
  • The first XO should make sounds after the check key is pressed
  • Both XOs should show the distance between each other on the screen
  • Distance works both ways r on the screen
  • Distance works both ways
PassFail Pass  +
Short name Distance  +
Software release Candidate  +, and 8.2.0 (767)  +
System component warning.pngEmpty strings are not accepted.
System feature warning.pngEmpty strings are not accepted.
Test category SmokeTest  +
Test objective Get 2 XOs running the distance activity  +
Test procedure Actions
  1. On both XO's click on the sa Actions
  2. On both XO's click on the same network (whatever is available) in each of their network views; confirm they are both connected
  3. Open Distance with one XO
  4. Share the activity with the neighborhood
  5. Go to the Network view of that XO
  6. Go to the Network view of the second XO
  7. In the network view of the second XO click on the distance activity that the first one just shared
  8. On the first XO press the check key on the game pad to start measuring the distance
  9. Close the Distance activity
  10. Follow the same steps, but starting with the second XO (see that it works both ways) he second XO (see that it works both ways)
Test setup warning.pngEmpty strings are not accepted.
Test subcategory Distance  +
Test tools 2 XO units  +
Personal tools
  • Log in
  • Login with OpenID
About OLPC
About the laptop
About the tablet
Projects
OLPC wiki
Toolbox