Tests/SmokeTest/SuspendResume

From OLPC

< Tests
Revision as of 21:08, 23 December 2010 by Greenfeld (Talk | contribs)
(diff) ← Older revision | Current revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Test case: Suspend/Resume due to closed unit
How to report results

Stream Any
Category SmokeTest Sub-category Suspend/Resume due to closed unit
Component warning.pngEmpty strings are not accepted.
Feature warning.pngEmpty strings are not accepted.
Objective Practically close the XO unit (but not fully) to see how the unit reacts
Tools warning.pngEmpty strings are not accepted.
Setup warning.pngEmpty strings are not accepted.
Procedure NOTE: should only be done on laptops with production ECO or MP build

Actions

  1. Close the laptop almost fully (just to the point where the screen goes blank)
    • Another way of achieving the same result is pressing the power button once then pressing it again to bring the machine out of suspend
  2. Open and close the laptop repeatedly, maybe five or six times
    • Wait for the laptop to come out of suspend each time before closing it again
    • If the laptop does not come out of suspend on open, try pushing a few buttons and/or touching the mouse pad
Expected Results
and Pass Criteria 		Verify
  • The laptop comes out of each suspend successfully
  • The laptop never hangs in suspend or reboots itself when coming out of suspend
Comments This test case is not valid for laptops with OS 10.1.3 or higher, as well as with newer versions of updated firmware.

With newer updates we do not wake up until the power button is pressed to ensure the laptop does not wake up accidentally while still closed due to stacked laptops.

Release Stream Build Pass/Fail Trac Ticket(s) Comment(s) Date of Test
Candidate 8.2 766 Pass warning.pngEmpty strings are not accepted. warning.pngThe date "" was not understood (support for dates is still experimental).


8.2.0 (767) 8.2 767 Pass did open/close suspend about ten times while smoke testing the newest firmware q2e21 and it was fine. Suspended with the power button five times and it was fine. 2008/11/05


Candidate 8.2.1 24 Pass Firmware q2e29a, software os24.img

No problems with case and power button suspend/resume multiple times.

2009/01/29


Facts about Tests/SmokeTest/SuspendResumeRDF feed
Build number 766  +, 767  +, and 24  +
Build stream Any  +info.pngLink to builds in stream, Packages in stream, ChangeLog, Differences vs joyride , 8.2  +info.pngLink to builds in stream, Packages in stream, ChangeLog, Differences vs joyride , and 8.2.1  +info.pngLink to builds in stream, Packages in stream, ChangeLog, Differences vs joyride
Comments warning.pngEmpty strings are not accepted. , did open/close suspend about ten times while smoke testing the newest firmware q2e21 and it was fine. Suspended with the power button five times and it was fine., and Firmware q2e29a, software os24.img No problems with case and power button suspend/resume multiple times.
Created warning.pngThe date "" was not understood (support for dates is still experimental). , 5 November 2008  +, and 29 January 2009  +
More notes This test case is not valid for laptops … This test case is not valid for laptops with OS 10.1.3 or higher, as well as with newer versions of updated firmware. With newer updates we do not wake up until the power button is pressed to ensure the laptop does not wake up accidentally while still closed due to stacked laptops. while still closed due to stacked laptops.
Pass criteria Verify
  • The laptop comes out of each suspend successfully
  • The laptop never hangs in suspend or reboots itself when coming out of suspend
PassFail Pass  +
Short name Suspend/Resume due to closed unit  +
Software release Candidate  +, and 8.2.0 (767)  +
System component warning.pngEmpty strings are not accepted.
System feature warning.pngEmpty strings are not accepted.
Test category SmokeTest  +
Test objective Practically close the XO unit (but not fully) to see how the unit reacts  +
Test procedure NOTE: should only be done on laptops wi … NOTE: should only be done on laptops with production ECO or MP build

Actions

  1. Close the laptop almost fully (just to the point where the screen goes blank)
    • Another way of achieving the same result is pressing the power button once then pressing it again to bring the machine out of suspend
  2. Open and close the laptop repeatedly, maybe five or six times
    • Wait for the laptop to come out of suspend each time before closing it again
    • If the laptop does not come out of suspend on open, try pushing a few buttons and/or touching the mouse pad few buttons and/or touching the mouse pad
Test setup warning.pngEmpty strings are not accepted.
Test subcategory Suspend/Resume due to closed unit  +
Test tools warning.pngEmpty strings are not accepted.
Retrieved from "http://wiki.laptop.org/go/Tests/SmokeTest/SuspendResume"
Personal tools
  • Log in / create account
  • Login with OpenID
About OLPC
About the XO
Projects
OLPC wiki
Toolbox