User:Holt/XS Community Edition/0.2/Implementing

From OLPC

[edit] Initial Setup

1. Use "ifconfig" to determine the ip address of the XS.
   Take note of its eth0-ip-address = WAN-ip.
   If you've inserted the USB Ethernet Adapter above (serving the LAN/Intranet) also take note of the school server's eth1-ip-address = LAN-ip = 172.18.96.1
2. If you inserted the USB Ethernet Adapter above, configure its own Wifi Access Point (AP) to properly serve other LAN/Intranet client XOs. (If the Wifi AP is a router, DO NOT plug into its "WAN" port -- instead use any of its LAN/normal ports. And be sure to enable the AP's "bridge mode" or similar, or specifically disable the AP's own DHCP)

[edit] Dynamic Host Configuration Protocol (dhcpd)

[edit] Internet Domain Name Server (named)

[edit] Network Address Translation/NAT (iptables)

[edit] XMPP server (ejabberd)

[edit] IDMGR

[edit] Web server (apache)=

[edit] Proxy server and web cache (squid)

[edit] OLPC-update (rsync)

[edit] Activity update (activity updater)

[edit] Virtual Private Network (open vpn)