Emulating the XO/Help and tips: Difference between revisions
(Life) |
(Living) |
||
Line 19: | Line 19: | ||
But second I procure come to conjecture that the predominantly world is an mystery, a harmless enigma that is made disagreeable by way of our own mad bid to interpret it as though it had an underlying truth. |
But second I procure come to conjecture that the predominantly world is an mystery, a harmless enigma that is made disagreeable by way of our own mad bid to interpret it as though it had an underlying truth. |
||
Nobody can be undeniably like me. On occasion steady I have planned trouble doing it. |
|||
== Speed == |
|||
=== Does my qemu have kqemu? === |
|||
Does the version of the QEMU support [http://fabrice.bellard.free.fr/qemu/kqemu-doc.html KQEMU]? Type ctrl+alt+2 and type '''info kqemu'''. Use ctrl+alt+1 to return to OLPC screen. |
|||
On x86_64 you must run qemu-system-x86_64 instead of qemu. |
|||
Giving the -kqemu-kernel argument if kqemu is not supported will cause a one-line warning to go by as qemu starts up: |
|||
Could not open '/dev/kqemu' - QEMU acceleration layer not activated |
|||
:I run 'sudo qemu -kqemu-kernel ...' and this error doesn't appear. Does it mean it's being used? I haven't measured time differences yet, but it feels faster to boot and use.[[User:HoboPrimate|HoboPrimate]] 17:56, 6 August 2007 (EDT) |
|||
=== kqemu impact === |
|||
After installing <u>kqemu</u> and modprobe'ing, I get a 3x speedup in booting (to 45 sec), and a 5x in starting the webrowser (to 7 sec). |
|||
It actually feels usable. [[User:MitchellNCharity|MitchellNCharity]] 17:25, 13 May 2007 (EDT) |
|||
=== Coping with Slowness === |
|||
It is possible for the OLPC image to boot successfully and load the Sugar UI in the emulator but then be too slow to successfully load any activities. |
|||
For example, between build 239 and build 303 activity loading slowed enough for me (Qemu / 1.6GHz G4 PPC / OS X) that no activities loaded successfully. Symptons include messages in <tt>/home/olpc/.sugar/default/logs/shell.log</tt> like this: |
|||
<pre> |
|||
DEBUG - Shell.start_activity |
|||
DEBUG - Activity f4a9f5322b49dcc3364a4eca9b13633c0ce1868e (org.laptop.ChatActivity) launching... |
|||
DEBUG - Activity f4a9f5322b49dcc3364a4eca9b13633c0ce1868e (org.laptop.ChatActivity) launch timed out |
|||
STDERR - Introspect error: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken. |
|||
DEBUG - Couldn't create activity f4a9f5322b49dcc3364a4eca9b13633c0ce1868e (org.laptop.ChatActivity): Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken. |
|||
ERROR - Model for activity id f4a9f5322b49dcc3364a4eca9b13633c0ce1868e does not exist. |
|||
DEBUG - Activity f4a9f5322b49dcc3364a4eca9b13633c0ce1868e (org.laptop.ChatActivity) launching... |
|||
DEBUG - Activity f4a9f5322b49dcc3364a4eca9b13633c0ce1868e (org.laptop.ChatActivity) finished launching |
|||
</pre> |
|||
Another sympton is the flashing activity load icon appearing in the donut for a length of time and then disappearing without the activity loading. (Although this can also be caused by other issues such as uncaught programming errors.) |
|||
These failures are due to two timeouts values configured in the system, one in Sugar and one in D-Bus. If you're more patient than OLPC/Sugar is by default then it's possible to tweak these values to enable activities to eventually load: |
|||
==== D-Bus ==== |
|||
Insert the following line in <tt>/etc/dbus-1/session.conf</tt> below the <tt></policy></tt> tag: |
|||
<pre> |
|||
<limit name="service_start_timeout">120000</limit> |
|||
</pre> |
|||
This means D-Bus will wait 120 seconds before giving up--the icon will still disappear from the donut but eventually the activity will load. (Strictly speaking this setting might really need to be in <tt>session-local.conf</tt>. See [http://www.die.net/doc/linux/man/man1/dbus-daemon.1.html man dbus-daemon].) |
|||
==== Sugar ==== |
|||
To ensure the flashing activity load icon appears in the donut longer the following <i>untested</i> change should work: |
|||
In [http://dev.laptop.org/git.do?p=sugar;a=blob;f=shell/model/homeactivity.py shell/model/homeactivity.py] replace: |
|||
<pre> |
|||
self._launch_timeout_id = gobject.timeout_add(20000, self._launch_timeout_cb) |
|||
</pre> |
|||
with (for example) this: |
|||
<pre> |
|||
self._launch_timeout_id = gobject.timeout_add(120000, self._launch_timeout_cb) |
|||
</pre> |
|||
As far as I can tell this only has a cosmetic impact and activities should still load without it. |
|||
More often than not, technology manages to get us 95% of the way... being the last 5% a mix of magical incantations, rituals and other esoteric activities only clear to the initiated. This page tries to take some of the magic away from the ''sufficiently advanced science'' |
|||
If you want to use '''[http://www.nano-editor.org/ nano]''' for system file edits, |
|||
make sure line wrap is disabled by '''Alt-L''' |
|||
(or look here for its [http://www.gnu.org/software/nano/manual/ documentation]). |
|||
=== My emulator is very slow === |
|||
Are you using the kqemu or qvm accelerator modules? You do have to have administrator rights to install the services. QEMU manager (in Windows) knows to start these services according to your profile settings. |
|||
See [http://www.h7.dion.ne.jp/~qemu-win/ Qemu on Windows] and [http://fabrice.bellard.free.fr/qemu/download.html QEMU Home Page] |
|||
== Display == |
== Display == |
Revision as of 08:19, 3 May 2010
When it comes to emulating systems like the XO, sometimes it seems like technology only manages to get us 95% of the way there--the last 5% an assortment of mystical incantations and other superstitious activities just to confuse the uninitiated. This page is a humble attempt to take some of the magic and mystery away from this sufficiently advanced science.
Please remember to end your comments with ~~~~, which is replaced by a time stamp when you save the page. Without them, notes that are months old and obsolete look the same as notes added yesterday.
Bear in mind that some of the information on this page is obsolete, and some of it only applies to certain XO disk images.
How to
And you at the end of the day get to a consensus, where you proceed a nous of what really ought to be done, and then they entrust it to me and then I unholster it. I utilizing a instrument draw up it in the brains, the contemplative sense.
But second I procure draw nigh to believe that the total world is an riddle, a harmless enigma that is made grave by our own fervent bid to interpret it as however it had an underlying truth.
But at this very moment I arrange upon to credence in that the predominantly world is an riddle, a inoffensive mystery that is made evil by way of our own irate bid to spell out it as despite the fact that it had an underlying truth.
But at this very moment I suffer with upon to conjecture that the in the main area is an enigma, a inoffensive puzzle that is made terrible past our own mad bid to take to mean it as despite the fact that it had an underlying truth.
But at this very moment I procure upon to conjecture that the in the main area is an mystery, a mild mystery that is made disagreeable by way of our own fervent attempt to take to mean it as however it had an underlying truth.
But second I procure come to conjecture that the predominantly world is an mystery, a harmless enigma that is made disagreeable by way of our own mad bid to interpret it as though it had an underlying truth.
Nobody can be undeniably like me. On occasion steady I have planned trouble doing it.
Display
Font Size correction
You will want to edit /etc/X11/xorg.conf and apply the changes suggested in (Trac #3681) to get the fonts to look bigger and nicer in emulation: (Vorburger 13:35, 7 October 2007 (EDT))
Edit xorg.conf
Ctrl-Alt-3 nano /etc/X11/xorg.conf
Add a new section "monitor"
Section "Monitor" Identifier "Monitor0" DisplaySize 153 115 EndSection
Add a "Monitor" line to the "Screen" Section
Section "Screen" ... Monitor "Monitor0" EndSection
Restart X [ kill it and let init respawn it. ]
killall -i X
Fullscreen
If you run qemu on a physical 1024x768 display (e.g. a laptop with 1024x768 LCD), you get a MUCH more "natural" experience if you switch qemu to fullscreen: Add "-full-screen" as argument to qemu start-up, and/or press Ctrl-Alt-F on a running qemu to toggle. (Vorburger 13:35, 7 October 2007 (EDT))
Development
Use the -devel_ext3.img xo disk image
You need a "*-devel_ext3.img" image, rather than a standard (non-devel) one. The -devel image has extra software like sshd and wget. The code changes rapidly, so you probably want LATEST rather than LATEST-STABLE.
Communicating between host and xo image
Check networking
Make sure networking is working. In short, an "ifconfig" should show inet addr:10.0.2.15 on eth0, you should be able to do a "ping 10.0.2.2" (that's how the host is visible) and have a working e.g. "wget http://wiki.laptop.org/" from CLI before going any further.
Recent builds (i.e. 613) work out of the box IFF you pass the correct qemu start-up parameters (see Emulating the XO/Quick Start). If not, you can try a manual "ifup eth0", but as of build 613 there will be other problems (X/X11/Sugar start-up) if networking is not working during start-up.
Vorburger 04:14, 7 October 2007 (EDT)
SSH into qemu
- #Change the root password
- Add the argument -redir tcp:2222::22 whenever you run qemu. 22 is the ssh port (on the guest). 2222 is a semi-arbitrary port on the host, which gets mapped to it. If you run a second image simultaneously, you could use 2223::22 for it.
- You can now log into the laptop image, from your real machine, using ssh. And you can use scp, etc.
ssh -o NoHostAuthenticationForLocalhost=yes -p 2222 root@localhost scp -o NoHostAuthenticationForLocalhost=yes -P 2222 filefoo.py root@localhost:/usr/share/activities/Your.activity scp -o NoHostAuthenticationForLocalhost=yes -P 2222 -r Your.activity/ root@localhost:/usr/share/activities/Your.activity
Unfortunately, you have to keep typing the password, unless you have set up a key.
SSH into qemu, using a key
Setting up a key means you don't have to keep typing the password.
The -devel xo .img is already running sshd.
- Create a key pair if you don't already have one:
ssh-keygen -N '' -t rsa -f ~/.ssh/id_rsa # If it asks you Overwrite?, say NO!. You already have one.
This creates a no-passphrase key pair. Which is fine for using with the xo image (no-one is trying to break into the xo from your machine;), but you shouldn't later use this weak key on other, more important systems.
- Copy the public key onto the xo image:
#Change the root password if you haven't already.
scp -o NoHostAuthenticationForLocalhost=yes -P 2222 ~/.ssh/id_rsa.pub root@localhost:~/
Inside ssh, do:
mkdir ~root/.ssh mkdir ~olpc/.ssh cat id_rsa.pub >> ~root/.ssh/authorized_keys cat id_rsa.pub >> ~olpc/.ssh/authorized_keys
Now you can ssh into the xo image without typing a password.
You may need to change the permissions of the authorized_keys file like this:
chmod g-w ~root/.ssh/authorized_keys chmod g-w ~olpc/.ssh/authorized_keys
SSH into qemu, without having to specify the user or port
Setup a ssh config entry on your host to simplify using ssh. The following steps are all performed on the host.
- Create a config file if you don't already have one:
touch ~/.ssh/config
- Add a section for your host (vi ~/.ssh/config or nano ~/.ssh/config) :
Host olpc User root Port 2222 Hostname localhost
You can now just use the alias olpc to use ssh/scp without specifying the user or port
ssh olpc
or
scp somefile olpc:
Comfortably transfer Files between Host and XO
To transfer Files between Host and XO, once you have set-up a root passwd and added the argument -redir tcp:2222::22 whenever you run qemu as described above, the easiest is to use scp with a graphical scp client. This will allow you to easily "browse" and "explore" the XO's file system.
ToDo: On Linux, Nautilus und Konqueror can natively do scp as well; you probably just type scp://localhost:2222/ (or fish://localhost:2222/, or sftp://localhost:2222/ ?) in the address bar, but I haven't tested this.
On Windows, use WinSCP from http://winscp.net/eng/download.php and connect as root to localhost port 2222.
PS: And while we're on tools for Windows... use Putty from http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html to SSH (localhost:2222) from Windows into your XO, not Cygwin. Putwin will emulate the terminal correctly by default, give you colors, scrolling and copy/pasting easily work, etc.
Vorburger 04:23, 7 October 2007 (EDT)
Pull things from a webserver
If you don't want to deal with ssh, and have a webserver, you might simply download stuff using wget or the Browser activity.
Get an xterm from the xo
Use -X
ssh -X -o NoHostAuthenticationForLocalhost=yes -p 2222 root@localhost ... xterm&
However, there are security vulnerabilities associated with -X.
Miscellaneous
- Under QEMU the Laptop image can see the host as IP address 10.0.2.2 .
Doables:
- Perhaps describe using samba and qemu's tftp.
- Describe passphrase avoidance if you already have an id. Is giving folks a no-passphrase id just setting them up for future problems? What's the right thing here?
Running sugar activities from shell
Running sugar activities from the command-line, instead of via the gui, can be useful when debugging.
Log in as root, then:
su olpc grep export /usr/bin/sugar > /tmp/env source /tmp/env
You can then run activities:
sugar-activity web
Restart sugar
Sugar notices new activities, and changed activity icons, only when it starts.
To restart sugar, you can do any of:
- Restart qemu
- Kill X using killall: As root, run
killall -i X
- Kill X using the qemu console (see #sendkey):
sendkey ctrl-alt-backspace
Get 1200x900 resolution
Qemu does not currently support 1200x900 (though the cvs version is said to, via -vmwarevga). It defaults to 1024x768. Which is what the laptop's X and cairo see. So code you write assuming 1200x900, gets an unexpected down-scaling. Cairo make-it-smaller scaling is currently much faster than its make-it-bigger, so the performance impact may not be large. But if you were hoping to do nifty things with 200bpi, you need the CVS version. Or maybe use 1280x1024, and only use part of the screen? MitchellNCharity 21:16, 6 June 2007 (EDT)
- See #Run a Xephyr remote X display for a workaround. MitchellNCharity 10:48, 23 June 2007 (EDT)
Qemu does indeed support 1200x900, with the help of a special modeline. Here's the relevent parts extracted from my xorg.conf :
Section "Device" Identifier "Carte vidéo générique" Driver "cirrus" BusID "PCI:0:2:0" EndSection Section "Monitor" Identifier "Moniteur générique" Option "DPMS" HorizSync 28-51 VertRefresh 43-60 Modeline "1152x864@43" 55.75 1152 1184 1392 1424 864 883 889 908 Modeline "1200x900@43" 60.82 1200 1232 1456 1488 900 919 926 946 EndSection Section "Screen" Identifier "Écran générique" Device "Carte vidéo générique" Monitor "Moniteur générique" DefaultDepth 16 SubSection "Display" Modes "1200x900@43" "1152x864@43" "1024x768" EndSubSection EndSection
Hklv 18:13, 5 April 2008
Run a Xephyr remote X display
You can use Remote Display to run X in a window on your host machine, rather than in the qemu window. Xephyr might also be used to get 1200x900 with a sugar-jhbuild sugar.
Once qemu supports 1200x900, or if you are using a different emulator, this may not be of interest.
In qemu, as root,
The first time:
- Give olpc a password
passwd olpc
- disable S98NetworkManager for rc3 if you earlier needed to do this for normal rc5.
mv /etc/rc3.d/S98NetworkManager /etc/rc3.d/DISABLED-S98NetworkManager
Every time:
- partially shut down:
init 3
- wait a bit, and then turn the network back on:
ifup eth0
On the host, (based on http://etbe.blogspot.com/2007/01/xephyr.html ):
The first time:
- give an xauth cookie to olpc and Xephyr
mcookie > xephyr-cookie export COOKIE=`cat xephyr-cookie` rm -f xephyr-xauth; echo "add :1 . $COOKIE" | xauth -f xephyr-xauth ssh -o NoHostAuthenticationForLocalhost=yes -p 2222 olpc@localhost "echo \"add 10.0.2.2:1 . $COOKIE\" | xauth"
Every time:
- run Xephyr
Xephyr :1 -auth xephyr-xauth -reset -screen 1200x900x8 -dpi 200
- and in another window, start sugar
ssh -o NoHostAuthenticationForLocalhost=yes -p 2222 olpc@localhost
and then as olcp:
DISPLAY=10.0.2.2:1 sugar
Ideally we would run /bin/sh .xinitrc, instead of sugar, but it currently crashes Xephyr repeatedly. The right thing is probably to extract the lines Xephyr is ok with, like setting keyboard repeats, and check that dropping the others doesn't lose something important.
Only because it might be easier on non-linux platorms, I note: A simpler, but much less secure, and probably slower (-X uses encryption) alternative is to run Xephyr with the -ac argument (disabling access control! Don't do this unless you really trust your firewall and local environment). And then in another window on the host, run xterm -display :1 -e ssh ... .xinitrc. Interestingly, this approach didn't require repeatedly restarting Xephyr.
Switching to a different presence server
Here we switch to olpc.collabora.co.uk:
cp -p /home/olpc/.sugar/default/config /home/olpc/.sugar/default/config.old gawk '/^server =/ {print "server = olpc.collabora.co.uk"} !/^server =/ {print}' /home/olpc/.sugar/default/config.old > /home/olpc/.sugar/default/config
Then #Restart_sugar.
Running multiple qemus
You can run multiple qemus at the same time. Each must have its own disk image.
There are a couple of options:
1. Just run them as you would individually.
This is easiest, and sugar Presence Service and tubes seem to work fine. Even though the copies all think they have the same ip address and mac.
2. Give the instances distinct macs and ips.
Illustrate... MitchellNCharity 23:45, 27 June 2007 (EDT)
3. Start a virtual network.
Eg, see http://olpcaustria.org/mediawiki/index.php/Devserver . Instances must be able to see the internet for Presence Service to work.
- Are there any advantages to doing a VDE versus option 2? MitchellNCharity 23:45, 27 June 2007 (EDT)
- Allows incoming connections, by avoiding qemu's default firewall. What else? MitchellNCharity 12:12, 28 June 2007 (EDT)
Installing software on the -devel image
The -devel_ext3 images have yum to install normal fedora x86 .rpm's.
If an olpc repository is down (eg olpc_development) one can still run yum by saying yum install package --disablerepo=olpc_development.
There is little free disk space on the -devel images, so you will need to #Expand a qemu image to install anything large.
Logging boot messages
WARNING: This disables (at least on Windows) the Ctrl-Alt-3 console (you get a "parallel0 console" instead) !!!
For Linux:
qemu -serial stdio -hda olpc-redhat-stream-development-ext3.img | tee boot.log
For Windows:
qemu.exe -serial file:boot.log -hda olpc*.img
The kernel params in /boot/grup/menu.lst are already set to send to console IO to both the screen and serial ( console=ttyS0,115200 console=tty0), so -serial stdio is all it takes to have it sent to stdout.
PS: Qemu on Windows doesn't like "-serial stdio", thus the "-serial file:boot.log" - might actually work on Linux, too?
PPS: Repeating warning - this disables (at least on Windows) the Ctrl-Alt-3 console (you get a "parallel0 console" instead) !!!
Cut and paste text from qemu
One simple approach is to login in the window from which qemu was started. This window is in the X of the host, but has the shell in qemu. So you can cat the text, and cut and paste it.
x2x might be another alternative. We should explore and document it. http://borderworlds.dk/blog/20070224-00.html MitchellNCharity 15:45, 2 October 2007 (EDT)
Mounting a qemu image (to directly manipulate its filesystem)
You can mount a ext3.img, to directly manipulate its filesystem. Caution: running qemu on it while it's mounted is said to be bad.
file olpc-redhat-stream-development-ext3.img
will say something like
olpc-image/olpc-redhat-stream-development-ext3.img: x86 boot sector; partition 1: ID=0x83, starthead 1, startsector 62, 984994 sectors, extended partition table (last)\011, code offset 0x48
Here the startsector is 62. Multiply it by 512 to get the mount offset (here 62*512=31744).
mkdir tmp_img sudo mount -o loop,offset=31744 olpc-redhat-stream-development-ext3.img tmp_img
Expand a qemu image
With N changed to the desired size in MB: (If on Windows, get Cygwin and install a dd; that works! ( The Qemu Manager allows a volume/drive image to be created and then accessed as e.g. /dev/hdb ))
dd if=/dev/zero of=laptop.img seek=N obs=1MB count=0
Obtain the gparted .iso LiveCD, from http://gparted.sourceforge.net/livecd.php (~50MB).
qemu -kernel-kqemu -boot d -cdrom gparted-livecd-0.3.4-7.iso laptop.img
Make sure you chose the second option in the Grub boot menu, "GParted-liveCD (Do X Configuration = mkxf86config)", not the default first "... (auto-configuration)".
(Alternatively, with the Qemu Manager, start up a regular image with a second (larger) volume e.g. /dev/hdb, once booted up, copy the original drive (/dev/hda) to the expanded image on /dev/hdb with e.g. "dd if=/dev/hda of=/dev/hdb" then follow the #Enlarging_the_Partition and #Enlarging_the_filesystem instructions...)
Do http://gparted.sourceforge.net/larry/resize/resizing.htm
For more background information, see also: (But you do not have to execute these steps when using gparted)
Emulating the xo's unusual color display
GTK for OLPC links to a patch to Xephyr, which adds a --swizzle argument, which very roughly emulates the appearance of an xo screen.
- The patch requires only one small change to apply against the current xserver source (git://anongit.freedesktop.org/git/xorg/xserver). But I've not been able to try compiling it (dependency issues). It might be easier on a distribution which handles source better than fedora, or on fc7. MitchellNCharity 14:13, 23 June 2007 (EDT)
There is now a display simulator for screenshots. MitchellNCharity 19:26, 23 June 2007 (EDT)
To erase the Journal
rm -r ~/.sugar/default/datastore
If using nano (an editor), disable line wrapping
If you want to use nano for system file edits, make sure line wrap is disabled by Alt-L (or look here for it's documentation).
Network startup
Should now "just work".
For the next week or few (Dec 2007), presence service (collaboration and mesh view) in joyride builds wont work out of the box, as they are configured to use a not yet existant ship2.jabber.laptop.org. You might try the currently overloaded and fragile jabber.laptop.org instead. MitchellNCharity 22:46, 14 December 2007 (EST)
Configuration
Altering display size and resolution
If you really can't get 1200x900, you can use 1280x1024 or 1024x768 instead. You can even use 800x600 to perhaps do development on small displays, but the result looks very different than on the real 1200x900.
Setting Framebuffer size
The kernel can be started with a VGA framebuffer of a few sizes. The vga=0x317 option.
You can edit the kernel line in /boot/grub/grub.conf, or at boot time, in the initial blue GRUB screen.
Colors | 640x480 | 800x600 | 1024x768 | 1280x1024 |
---|---|---|---|---|
256 | 0x301 | 0x303 | 0x305 | 0x307 |
32k | 0x310 | 0x313 | 0x316 | 0x319 |
64k | 0x311 | 0x314 | 0x317 | 0x31A |
16M | 0x312 | 0x315 | 0x318 | 0x31B |
NOTE: If you don't set the VGA kernel parameter to 0x317 (in order to get a 1024x768 with 64k colors) you will NOT be able to view / use Etoys properly.
- This NOTE is old. It may or may not be still true. 0x31A seems to work too. MitchellNCharity 18:56, 8 November 2007 (EST)
Setting DPI and font size for odd display sizes
https://dev.laptop.org/ticket/3681
Altering the desktop resolution on the LiveCd
I am not sure what this (below) does and if reducing the resolution to 800x600 is really a good idea, but what is outlined in https://dev.laptop.org/ticket/3681 seems to help to make things a bit less ugly in Emulation. (Vorburger 07:15, 7 October 2007 (EDT))
This is said to work on the current LiveCd. It might also work in xo/qemu images? MitchellNCharity 13:50, 5 June 2007 (EDT)
- Somehow pull up a terminal (there is one easily accessible via the classic Gnome desktop)
- Either edit /etc/X11/xorg.conf (example below focusing on the 'Modes' line setting 800x600) OR run system-config-display and select the appropriate resolution from the GUI
- Restart the X server with ctrl-alt-backspace (NOTE: This may take some seconds. It will drop back to a login prompt but if you wait it will start up X again, assuming you provided a valid resolution.)
Section "Screen" Identifier "Screen0" Device "Videocard0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 Modes "800x600" EndSubSection EndSection
Problems
Sound doesn't work
Latest images add support of sound. Emulation does not work properly with Tam-Tam, yet, even with kqemu at 2 GHz Pentium4 (performance or insufficient emulation issue?). Maybe somebody could install Csound in host and pipe sound over the virtual network? Windows version can be found in Cecilia and Csound for Windows installer --Tonyv
Keyboard and Mouse don't work
A typical case is that their keyboard and mouse don't work. A solution to the problem is:
- Make sure the the window has the focus (label should say QEMU - Press Ctrl-Alt to exit grab).
- Start the Terminal Activity, or press Alt + Ctrl + 1 (or Alt + Ctrl + 3) to enter the terminal mode of the OLPC. Notice that QEMu seems to respond better to by pushing first down Ctrl, after Alt and finally the number.
- Make sure that you're logged in.
- If not, just hit enter and it'll ask you to.
- Login as root (no password is required)
- Type modprobe i8042 (oddly, you may need to try this multiple times before it works, so keep trying!)
- Press Alt + Ctrl + 7 to return to the graphical mode of the OLPC.
- Your keyboard and mouse should be working fine.
- Usually the result is a continuous series of 1's will flow (as if the key is stuck)
- Just hit any key (to stop it) and delete the offending 1's
Alternatively you can use the developers console and su command. I have not been able to bring up the terminal in most images. Quote from BTest-1_Release_Notes :
Note: this does not work on joyride build 1483. I get FATAL: Module i8042 not found. LinuxMercedes 20:33, 21 January 2008 (EST)
Sugar GUI won't start
If the GUI fails to start, you may have forgotten to choose emulated when you booted, or you may have encountered the "GUI won't start" bug. The "GUI won't start" bug is fixed by reinstalling the hard disk image. (Or it may be because of a bug in the image file, see (Trac #1295) ). In QEMU, delete the .img file (it has become corrupted), and extract the original .img file from the bz2 file, or download the image file again. Upgrading to a later version isn't necessary.
On Ubuntu with Xinerama, mouse behaves strangely and cursor disappears
Try running "export SDL_VIDEO_X11_DGAMOUSE=0" before running Qemu (if you use another shell instead of bash, use something like "setenv SDL_VIDEO_X11_DGAMOUSE 0").[1] MitchellNCharity 15:38, 2 October 2007 (EDT)
On Fedora, "service qemu start" needed?
On fedora linux, to get qemu working, you may have to start the service for it. As root run:
service qemu start
- Why would this be needed?? Emulation works without it. And making .exe files self launching seems unfortunate. MitchellNCharity 21:21, 23 May 2007 (EDT)
On Linux, if qemu complains about insufficient space in /dev/shm
then
mount -t tmpfs -o remount,size=144m none /dev/shm
Boot hangs on Debian-derived distros
We have heard multiple people say that QEMU doesn't work with these images on the debian-derived distributions. The symptom is that the kernel hangs during boot. There's a problem with bochsbios
version 2.2, version 2.3 works. As a quick fix, apm=off
can be added to OLPC kernel arguments.
We have heard multiple people say that QEMU doesn't work with these images on the debian-derived distributions. We also haven't heard of any solutions to these problems. The symptom is that the kernel hangs during boot.
Marcin: On Ubuntu Dapper it hangs with qemu 0.8.0 (from distro), but works with 0.8.1 from i386 binary tarball.
Budgester (I can confirm this situation on Ubuntu Dapper)
Vedran: It also hangs on Debian unstable with qemu 0.8.1-1 (from distro), but works with 0.8.1 from i386 binary tarball.
kevin.mark@verizon.net: It also hangs on Debian unstable with bochs 2.2.6-2 (from distro) the same way it does for qemu as noted above
MikeX: qemu 0.8.1-1 packaged for debian sid amd64 seems to work for me (system boots but sugar hangs, tried with build84).
[2]: It works on Debian Etch with qemu 0.8.2-4 (a little slow but works ok).
Spawn968: Hangs using qemu 0.8.2 with kqemu-1.3.0pre9, but runs fine on qemu 0.8.2 in Ubuntu Dapper.
dilinger: This is not actually a qemu issue; it's a bochsbios issue. Bochsbios 2.2 is broken in this regard; bochsbios 2.3 might work (an sti was added). A quick fix for allowing it to boot is to add 'apm=off' as a kernel argument. Debian bug #363047 has additional details.
Jwaddell:: Thanks Marcin...getting the 0.8.2 binary tarball from the link you provided made the image work under Ubuntu Dapper for me ;)
Tomhannen:: Please could some of you document your successes/failures on this page?
lealcy:: OLPC image doesn't work with Qemu 0.8.2 on Ubuntu 6.10 (Edgy Eft). It freeze in startup process. Check this shot:
http://wiki.laptop.org/go/Image:OLPC-qemu0.8.2-ubuntu6.10.png
Update: With the qemu 0.8.2 downloaded from http://fabrice.bellard.free.fr/qemu/download.html (the binaries) 1b2 loaded to the graphic interface, but I feel the interface a bit unresponsible (maybe an issue by emulation.) Thanks to Fernando <fernandogrd at yahoo dot com dot br> by the Qemu 0.8.2 Ubuntu issue tip.
SandwichButton:: lealcy, try entering the apm=off kernel argument. You need to enter the grub menu, edit the 'for qemu target' option by highlighting it and pressing e. The second line is the kernel arguments you pass at boot time. enter 'apm=off' without the single quotes at the end of the line, hit enter, then press b. It was previously freezing while mounting hda. My machine runs qemu 8.2, edgy 6.10 (w/ updates), and build 185 just fine now.
Misc
See also
- /Obsolete help and tips.