Autoreinstallation image: Difference between revisions
m (→System Update Procedure: highlighting new instructions) |
(→Downgrading: CRC file) |
||
Line 119: | Line 119: | ||
When it completes, remove the USB and reboot the XO. You may also need to do a copy-flash command. |
When it completes, remove the USB and reboot the XO. You may also need to do a copy-flash command. |
||
'''Note:''' the recent firmware requires a '''CRC''' file to be present; e.g., \boot\nandXXX.crc |
|||
Revision as of 23:28, 11 June 2007
Automatic Reinstallation Image
We've worked very hard to make it as easy as possible to update a machine in the field. Until network boot and update is available, this is as easy as it can get.
The Autoreinstallation image consists of an Open Firmware script that updates the NAND flash and firmware with the latest stable images, without requiring the user to do more than insert a prepared USB disk and turn on the machine.
NOTE: this procedure creates a USB flash key or disk that when booted on an OLPC laptop, updates its BIOS and installs (OVERWRITES) an operating system image onto NAND flash. NEVER boot this USB flash key or disk unless you intend to update your system, which will entirely erase anything you had on the flash memory of the system.
This procedure works for all types of OLPC hardware, including A-test boards and most B1 (see #Workaround for old B1 systems) and all B2 laptops. It works with both Open Firmware and Linux-as-BIOS installations - but does not work with Insyde BIOS. If you are still running Insyde BIOS, you will first have to upgrade the firmware using procedures described elsewhere.
The Software Release Notes document the status of the most important issues of this software.
System Update Procedure
Before you start: plug in your machine and ensure the battery is charged. It is very important that the update process not be interrupted. It will take about 2 minutes and 15 seconds total.
- Download the file http://olpc.download.redhat.com/olpc/autoupdate/olpc406_c11.zip
md5sum:0de554d266e87344f8d25b7fd2cebb74 olpc406_c11.zip
- Get a USB flash key or disk with at least 300 MiB of free space in the primary partition (it doesn't have to be partitioned at all). If your system currently has Open Firmware, the filesystem can be either FAT (like a factory-formatted device) or ext2. But it will not work if it is partitioned such that the partition type code says "83" (Linux ext2 or ext3) but the actual filesystem inside the partition is FAT. If your system has Linux-as-BIOS, the USB device must have a primary partition and an ext2 filesystem on it, as /dev/sda1 is the device that Linux as bootloader looks for.
- Unzip the files at the root of the USB flash key or disk drive, thus creating a directory called "boot". (If you drag and drop the files from the zip archive, you'll have to create the "boot" directory manually on the flash or disk drive.) Three files must be in the directory named "boot", for the automatic update to occur: q2c11.rom; nand406.img; and olpc.fth. A fourth file, bzimage must be in the root directory. Do not use a flash key or disk for which there have been any errors reported during unzipping: the files may be (probably are) damaged. As a further safeguard, the OLPC OFW BIOS checks the integrity of any BIOS flash image before reflashing the BIOS.
- (Optional) If you want to install an OS image besides build 406, download the appropriate jffs2 image from the image repository, and save it as nandXXX.img, where XXX is the number of the build. Then, edit olpc.fth, replacing 406 everywhere it occurs with the build number in the filename.
- Insert the USB flash key into the machine. If you have Open Firmware Q2C11 or later, hold down one of the "game keys" next to the screen, while you press the power button to turn on the laptop; then release the game keys when the screen lights up. If you have Open Firmware before version Q2C11, just turn on the power. If you have Linux-as-BIOS, hit ESC when you see the boot progress bar, then choose the USB key icon and hit Enter.
- If your USB device is a hard disk instead of flash, you may need to interrupt the Open Firmware boot sequence by pressing the Esc key (the upper left key on the keyboard, marked with an X in a circle), waiting a moment, then entering probe-usb2. You should see additional entries compared to the initial list that Open Firmware displayed. Then you can enter boot and the update should proceed. This is because many external hard drives take a long time to come ready. The latest firmware should fix this issue, however.
You will see messages like those in the following section as the system is updated. NAND flash always has some bad blocks: the "Skipping bad block" messages during writing NAND flash are therefore normal, informing you of the bad blocks that will never be used by Linux.
The system will automatically poweroff.
If anything goes wrong DO NOT TURN OFF THE MACHINE but please get help from OLPC, preferably immediately on IRC or by email.
Congratulations: you are finished! When you next power the machine on, you'll be running the new image.
Transcript of System Update
Release the game key to continue OLPC B1, 256 MiB memory installed, S/N Unknown Open Firmware CL1 Q2C08 Q2C USB2 devices: /pci/usb@f,5/wlan@3,0 /pci/usb@f,5/scsi@1,0 /pci/usb@f,5/scsi@1,0/disk USB1 devices: Type the Esc key to interrupt automatic startup Boot device: /usb/disk:\boot\olpc.fth Arguments: Checking existing OS image on NAND FLASH Existing OS build is 353 Updating OS image on NAND FLASH Erasing... 1800 Skipping bad block at 0xc20000 = page 0x1840 = eblock 0x61 3ff40 Writing 80c blocks 80b Done Existing firmware version is q2c08 Updating firmware Reading disk:\boot\q2c11.rom Got firmware version: CL1 Q2C11 Q2C Checking integrity ... SPI FLASH is type 13 - Spansion, Winbond, or ST Merging existing manufacturing data Erasing 0 Writing ff000 ... Done
In most cases, the system will power-off automatically after the firmware is updated.
Possible Problems
- It is better if the USB disk is not partitioned. If it is partitioned:
- The partition type must agree with the filesystem type - a FAT filesystem inside a partition marked ext2 won't work
- The updater files should be in the partition that is marked as "bootable", or if there isn't one, in the first partition.
- The main files (olpcboot.fth, nandNNN.img, q2bNN.rom) must be in the boot/ subdirectory. That will happen automatically if you "unzip" the archive, but if you drag-and-drop from a file manager like file-roller, it is possible to put them anywhere, and that won't work. Those files must be in boot/ . (The bzImage file, which is needed to support upgrading from Linux-as-BIOS, goes in the root directory.)
- The current Open Firmware releases do not support USB keys that identify themselves as class "mass_storage/removable", as opposed to the more common "mass_storage/scsi", which is supported. (The fix for this problem is in the release pipeline, but that doesn't help for upgrading from existing firmware.) The way to check for this is to insert your USB key, power-on the system and stop the auto-boot by typing the Esc key (upper left key) at the countdown. Then look at the list of "USB2 devices". If you see an entry like "/pci/usb@f,5/removable@1,0", your disk has the problem. (If you are running an old version of OFW that does not display the "USB2 devices" list automatically, type "show-devs /usb" to see the list.) The workaround procedure is below.
- The current firmware also fails with USB devices whose hardware sector size is not 512 bytes. To determine the sector size of your device, you can use fdisk on the device under Linux, and it will tell you when it first accesses the device if the sector size is not 512. The workaround is the same as for the "removable" problem, i.e. the procedure below.
- Many Multi-Function devices do not work.
- If during the upgrade you see the following message, try renaming the file olpc.7th in the boot directory of the update image to olpc-boot.7th.
Trying startup script disk:\boot\olpc-boot.7th Can't open boot device
- On an ATest board the X server may fail to start up. You may need to provide a custom configuration.
Workaround for old B1 systems
If you have a B1 system that has never been upgraded, it is very important to use this page's Autoreinstallation procedure for your first update; do not try to use the new "netnandwrite" tool first. The reason is that this procedure automatically fixes a manufacturing error in the identification data that was stored in the system firmware FLASH, and updates the firmware, neither of which is done by the network-based tool. Also, some old firmware will not update with the auto-update script. If the standard procedure above doesn't update, instead, follow these steps:
- Insert the autoupdater key;
- boot up the laptop and when it says "Press a key to interrupt" then press any key;
- at the Ok prompt type "flash disk:\boot\q2c11.rom". The machine will turn off when finished.
- power up again and boot the autoupdater normally; (It will reflash the NAND with the new build.)
Workaround for "Removable" or large-sector devices
- Shut down the system
- Remove the USB disk that has the updater image
- Boot Linux from NAND FLASH
- Insert the USB disk
- Copy the file /bzImage from the updater filesystem on the USB disk file to /ofw.bzi in the root directory of the NAND FLASH on the OLPC machine, e.g.
mount /dev/sda1 /mnt cp /mnt/bzImage /ofw.bzi
- Shutdown Linux
- Power on, and type space during the Open Firmware auto-boot countdown
- At the Open Firmware "ok" prompt, type the following, and the update procedure should then proceed automatically:
ok null$ to ramdisk boot nand:\ofw.bzi
Downgrading
If you are trying to load a build that is older than the one on the XO, you will get a message that the software is up to date. To force it to load an older version, at the OK prompt type:
copy-nand disk:\boot\nandXXX.img
When it completes, remove the USB and reboot the XO. You may also need to do a copy-flash command.
Note: the recent firmware requires a CRC file to be present; e.g., \boot\nandXXX.crc