Tests/SmokeTest/SuspendResume

Stream	,\|x\|Build stream::x}}
Category	Test category::SmokeTest	Sub-category	Test subcategory::Suspend/Resume due to closed unit
Component	System component::
Feature	System feature::
Objective	Test objective::Practically close the XO unit (but not fully) to see how the unit reacts
Tools	Test tools::
Setup	Test setup::
Procedure	[[Test procedure::NOTE: should only be done on laptops with production ECO or MP build Actions Close the laptop almost fully (just to the point where the screen goes blank) Another way of achieving the same result is pressing the power button once then pressing it again to bring the machine out of suspend Open and close the laptop repeatedly, maybe five or six times Wait for the laptop to come out of suspend each time before closing it again If the laptop does not come out of suspend on open, try pushing a few buttons and/or touching the mouse pad]]
Expected Results and Pass Criteria	[[Pass criteria::Verify The laptop comes out of each suspend successfully The laptop never hangs in suspend or reboots itself when coming out of suspend]]
Comments	More notes::

Release	Stream	Build	Pass/Fail	Trac Ticket(s)	Comment(s)	Date of Test
Software release::Candidate	Build stream::8.2	Build number::766	PassFail::Pass	,\|x\| #x}}	Comments::	Created::
Software release::8.2.0 (767)	Build stream::8.2	Build number::767	PassFail::Pass	,\|x\| #x}}	Comments::did open/close suspend about ten times while smoke testing the newest firmware q2e21 and it was fine. Suspended with the power button five times and it was fine.	Created::2008/11/05
Software release::Candidate	Build stream::8.2.1	Build number::24	PassFail::Pass	,\|x\| #x}}	[[Comments::Firmware q2e29a, software os24.img No problems with case and power button suspend/resume multiple times.]]	Created::2009/01/29

Navigation menu