Battery Charging

From OLPC
Jump to navigation Jump to search
  This page is monitored by the OLPC team.

Battery Charging

Types of Batteries

OLPC is using two battery chemistries: NiMH, and LiFePo batteries. The LiFePo batteries allow charging at higher temperatures. The NiMH batteries cannot be charged above about 45 degrees C.

Recovery of Dead Batteries

BTest-1 Systems

BTest-2 Systems

Long Term Storage

Battery-2.jpg

If you plan to store a system for many weeks or months, your best strategy is to fully charge the battery and remove the battery from the laptop. Batteries naturally lose charge with time (how fast depends on the battery and its chemistry), and the embedded controller in the laptop, while sipping tiny amounts of power in its low power state, will drain the battery faster. Even though BTest-2 systems should now always be able to recover batteries that are fully discharged (except those noted above), it is a trickle charge process and time consuming.

As you can see above, letting a battery drain all the way will cause problems when recharging, how severe depends on the circumstances.

This strategy to remove batteries is true for all battery powered equipment, from flashlights up. Batteries sometimes leak. And some chemistries of Lithium batteries (not LiFePo) can get into a metastable state where they cannot be recharged.