Release notes/13.2.4/Installation/XO-1/SD

From OLPC
< Release notes‎ | 13.2.4‎ | Installation/XO-1
Revision as of 23:45, 10 May 2015 by Quozl (talk | contribs) (Created page with '* select an SD card of at least 4GB capacity; it will be erased by the process below, * select a USB drive of at least 1GB capacity, * download [http://dev.laptop.org/~quozl/1123…')
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
  • select an SD card of at least 4GB capacity; it will be erased by the process below,
  • select a USB drive of at least 1GB capacity,
  • download 32016o0.zip (606 MB) and expand the contents onto the USB drive,
  • Shutdown the XO-1,
  • insert the USB drive and the SD card into the XO-1,
  • hold down all four game keys above the power button,
  • turn on the laptop,
  • wait for the message Release the game keys to continue,
  • release the game keys, progress will be displayed, grey blocks will turn green, and the screen will show:
 Blocks/square: 2        Total blocks: 14195     Now writing: 70  0 %
 Installing to SD card ..... please wait.
  • after a few minutes it will show:
 Blocks/square: 2        Total blocks: 14195     Now writing: 0  0 %
 Rebooting in 10 seconds ... please wait.
  • it is finished, you may the USB drive then, during the reboot, or after the reboot.
Retrieved from "http://wiki.laptop.org/mediawiki/index.php?title=Release_notes/13.2.4/Installation/XO-1/SD&oldid=297335"