View source for XO1.75 B1 C1 Changes

{{OLPC}}
These are the changes planned for the XO-1.75 [[XO_1.75_C1|C1]] prototype, from the [[XO_1.75_B1|B1]] prototypes.

=C1 Electrical Fixes=

==Improved MPPT==
The circuit generating the PWR_LIMIT_ON needs to be modified to only assert the signal if power limiting is turned on.   On B1, it is asserted whenever the laptop is accepting power from the DC input (power limited or not).

The LV_SET signal should probably change to a EC PWM output, allowing a greater voltage swing than the EC DAC output.

==Modify Vcore supply==
The Vcore suply voltages should be 1.345V nominal and 1.25V nominal, instead of 1.40V and 1.345V as it is now.

==Pullups on Accelerometer==
Both <trac>11041</trac> or <trac>10882</trac> are caused by a lack of external pullups on the I2C bus.  1.3K pullups to should be added between G_SENSOR_SDA/G_SENSOR_SCL and +1.8V_GPIO.   VDD_IO on the Accelerometer (U15) should be tied to +1.8V_GPIO, not +1.8V.   Same with U5.

=C1 Layout Fixes=

=Planned Feature Changes=

[[Category:Hardware]]
[[Category:XO-1.75]]