Screen replacement: Difference between revisions

From OLPC
Jump to navigation Jump to search
Line 28: Line 28:


== Taking out the screen ==
== Taking out the screen ==

[[Image:ScreenreplaceStep2a.jpg]]

To get the screen out, remove the four screws highlighted in blue.

[[Image:ScreenreplaceStep2b.jpg]]

Next, carefully slide the screen out, pulling the bottom out. Do not tug it or let go, as it will still be connected to the motherboard by two cables.

[[Image:ScreenreplaceStep2c.jpg]]

[[Image:ScreenreplaceStep2d.jpg]]

[[Image:ScreenreplaceStep2e.jpg]]

[[Image:ScreenreplaceStep2f.jpg]]

Lift up the plastic latches and gently pull out the cables. This will allow you to pull out the screen.

Revision as of 19:19, 22 May 2008

Replacing a screen is a relatively uncomplicated task. To do this, you will need a standard #1 screwdriver and something to hold screws in (in a pinch, parts taken off the XO can serve as temporary screw holders).

ScreenreplaceStep0.jpg

Taking off the front panel

ScreenreplaceStep1a.jpg

Begin by opening the laptop and flipping the screen up, and then rotating it to a 90 degree angle, similar to this.

ScreenreplaceStep1b.jpg

Next, remove the screws circled in blue from the bottom of the screen. There are two on each side (right/left) of the XO, so make sure to get all four.

ScreenreplaceStep1c.jpg

ScreenreplaceStep1d.jpg

Remove the two green panels from the side of the XO by first sliding them and then lifting them off.

ScreenreplaceStep1e.jpg

ScreenreplaceStep1f.JPG

Finally, pull off the front panel, pulling it out at the bottom and then gently sliding it downwards.

Taking out the screen

ScreenreplaceStep2a.jpg

To get the screen out, remove the four screws highlighted in blue.

ScreenreplaceStep2b.jpg

Next, carefully slide the screen out, pulling the bottom out. Do not tug it or let go, as it will still be connected to the motherboard by two cables.

ScreenreplaceStep2c.jpg

ScreenreplaceStep2d.jpg

ScreenreplaceStep2e.jpg

ScreenreplaceStep2f.jpg

Lift up the plastic latches and gently pull out the cables. This will allow you to pull out the screen.