Modem: Difference between revisions
Ankur.verma (talk | contribs) No edit summary |
Ankur.verma (talk | contribs) No edit summary |
||
Line 22: | Line 22: | ||
1. connect |
1. connect |
||
2. itfchg |
2. itfchg |
||
3. cdu680config : This file needs to be edited for entering your User name and password. |
3. cdu680config : This file needs to be edited for entering your User name and password that your SP provides. After entering your username and password it will look similar to this: |
||
[Dialer Defaults] |
|||
Modem = /dev/ttyACM0 |
|||
Baud = 460800 |
|||
Init1 = ATZ |
|||
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 |
|||
ISDN = 0 |
|||
Modem Type = USB Modem |
|||
Phone = #777 |
|||
Username = MIN@cs3g.com |
|||
Password = cs3g |
|||
4. execute.sh |
4. execute.sh |
||
These are needed for installing the drivers for this particular modem. |
These are needed for installing the drivers for this particular modem. |
Revision as of 16:39, 2 June 2008
see more templates or propose new |
Steps
The following steps are tested with Franklin CDU-680DOrA Mobile Broadband USB Modem.
1. Insert the modem into an USB slot on XO. The device will be shown as a removable storage on XO. 2. Make a directory and copy the following files in it:
- Packages
1. Wvdial : wvdial-1.54.0-5.2.2.1.i386.rpm 2. PPP: ppp-2.4.4-2.i386.rpm 3. Libwvstreams: libwvstreams-4.2.2-3.fc7.i386.rpm
2 and 3 are the dependencies for installing 1.
- Files
The following files are located under the Linux directory 1. connect 2. itfchg 3. cdu680config : This file needs to be edited for entering your User name and password that your SP provides. After entering your username and password it will look similar to this:
[Dialer Defaults] Modem = /dev/ttyACM0 Baud = 460800 Init1 = ATZ Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 ISDN = 0 Modem Type = USB Modem Phone = #777 Username = MIN@cs3g.com Password = cs3g
4. execute.sh These are needed for installing the drivers for this particular modem.
3. Run the following script so that the device is recognized as a modem.
Help:Save this script in a new file, give execute permission to it and then run it using bash.
#!/bin/bash #Installs the required packages: wvdial, ppp and libwvstreams if not installed. for i in `ls *.rpm`;do rpm -i $i;done &> /dev/null #End all the services running related to modem killall wvdial &>/dev/null killall connect &>/dev/null sleep 5 #install drivers and quit "connect" while read line;do echo $line;echo $line|grep init && break &> /dev/null;done< <(./connect 2>&1) killall connect &> /dev/null ifconfig msh0 down killall wvdial &> /dev/null sleep 5 while read line do echo $line echo $line|awk '/DNS/ {print "nameserver "$5}' >> /etc/resolv.conf done< <(wvdial --config cdu680config 2>&1)
4. PPP0
Work in progress here
Possible Work is to develop a generic way of interfacing any modem with XO.
Contact
Contact Ankur Verma through -
Email : ankur AT laptop dot org
IRC : ankur on #olpc #sugar