BTest-1 Release Notes: Difference between revisions

From OLPC
Jump to navigation Jump to search
Line 81: Line 81:
The X Window System does not yet support the RandR extension, (rotation of the screen).
The X Window System does not yet support the RandR extension, (rotation of the screen).


If a console application manages to somehow [http://dev.laptop.org/ticket/367 screw up the colormap], the system won't recover without rebooting the machine.
If a console application manages to somehow [http://dev.laptop.org/ticket/367 modify the colormap], the system won't recover without rebooting the machine.


We are not happy with the behavior of the touchpad: how much of this is hardware and how much software remains to be determined. The writing (stylus) mode of the touchpad has been disabled in the BTest-1 units, as the hardware does not work properly and is being redesigned.
We are not happy with the behavior of the touchpad: how much of this is hardware and how much software remains to be determined. The writing (stylus) mode of the touchpad has been disabled in the BTest-1 units, as the hardware does not work properly and is being redesigned.
Line 88: Line 88:


The X Window System Xvideo extension is supported in the X server; note that a slightly different colormap is loaded while video is playing to improve video quality; other colors in use may become slightly strange during this period.
The X Window System Xvideo extension is supported in the X server; note that a slightly different colormap is loaded while video is playing to improve video quality; other colors in use may become slightly strange during this period.

;[http://dev.laptop.org/ticket/418 The keymaps for our initial set of keyboards are only installed when Build 185 is installed]: There are known issues with the keyboard descriptions.


==User Interface==
==User Interface==

Revision as of 19:00, 27 November 2006


Introductions and Expectations Setting

There is a major difference between the OLPC system and a conventional laptop of approximately five years ago; that is, our base system software is much more capable than it was then. The Linux environment now supports internationalization capability for scripts that were out of our reach then, and much higher quality rendering and, best of all, a much wider range of applications.

This has come somewhat at a cost, however: Moore's "Law" has allowed us to become sloppy, both in memory usage and CPU usage; this tends to force us to make some tough choices to keep the "footprint" of the software acceptable. The OLPC laptop have only 512 MB of storage (Flash), and probably the most serious limitation, 128 MB of RAM, and a single-core processor. Over the last year or so, the community has become much more sensitive to these issues, and work is well underway toward reigning in this "bloat" and performance work in general. Small is beautiful (and usually faster!).

Our base technology choices have been predicated on the ability of the software to achieve the best overall worldwide "user experience". This drove our choice of GTK+ and Pango (with Cairo as the graphical underpinnings), since Pango's abilities in complex scripts are currently most advanced of free software technologies. Other toolkits can be used: but they come at a cost in memory and flash footprint, and today, in the ability of software based on them to be localized to many of the scripts we face immediately, which include both Thai and Arabic. Including other toolkits as a standard part of our base system is therefore problematic, and experience on embedded systems show that including multiple toolkits would almost certainly cause the overall experience to suffer.

The Meaning of BTest-1

This is the beta test of fully functional hardware; however, the software is alpha test. The camera, SD slot and NAND flash are currently interfaced by an FPGA version of CaFE; the ASIC version will be available by BTest-2.

Most of our effort to date has been consumed by basic device support as well as putting together the basic user interface framework for children, which has known performance problems. Major components are as yet not complete: power management and the wiki editing system to name two large components. Enough is now present to begin to sketch the outline of where we believe the children's software should go: enabling the construction of software in which children and teachers can easily collaborate is central to our vision. Children should not be passive receivers of "content" but creators as well.

Hardware

User's guide to the hardware

Note you are seeing a system during test, well before when you would see a "normal" commercial product. This is to allow both hardware and software testing to commence, since our system is significantly different than conventional laptops, and will be used in very different environments. You will see "behind the curtain" a process that system manufacturers hide from you: the good, the bad, and the ugly of hardware and software debug.

Pictures/features

Hardware Specification

The BTest-1 systems were built with an extra 128meg of RAM, to partially make up for well known memory problems in key applications, in particular the web browser, based on Firefox's Gecko technology. Work is well underway to reduce the browser's footprint; some of this work is visible in Firefox 2.0. BTest-2 will be built with 128 meg of RAM total.

Note that the BTest-1 systems use an Altera FPGA to implement that CaFE ASIC (which interfaces the camera, NAND flash and SD slot), which will not be available until the BTest-2 build. This has allowed us to test the design of CaFE and to build early systems more than 6 weeks sooner. Using an FPGA has several consequences: the FPGA consumes considerable power, and it is relatively slow. CaFE's NAND flash controller, while several times faster than on the Geode's controller on ATest boards, is still very slow relative to what it will be when implemented as an ASIC; similarly the SD controller is also slow relative to its eventual performance, both due the limitations on the speed of the FPGA, and since high speed mode for SD is just now being implemented in the device driver.

The hardware specification is elsewhere in the wiki.

Hardware Release Notes

Our master list of hardware and mechanical issues and status can be found in the trac system we use. Please check this list before entering new issues: but please do enter issues you discover. The items below are the most significant from the list.

ESD problem with the embedded controller
One of the most irritating and noticeable problems is a static discharge problem that can crash the embedded controller, causing some or all of the keyboard keys or touchpad to stop functioning. Power the unit off and on again to reset it (Note: you may need to remove and re-insert the battery to reset the EC completely).
The resistive sensor does not work
(for use with a stylus for writing), due to a design flaw: The stylus pad area was disabled and should be fixed in BTest-2 machines
The arrow keys ("game keys") cannot be distinguished from the arrow keys on the keyboard
This will be fixed on BTest-2 system.
Manufacturing data values are in the wrong order
This will be fixed the first time we update the BIOS SPI ROM.
Power management is as yet unimplemented
Therefore you cannot suspend and resume the machine (yet).

Design Release Notes

The BTest-1 systems do not have textured plastic: this is intended for future builds.

Other design issues are also under investigation
Note that design is always an over constrained problem: it is often not possible to get every thing you would like in a design, though you can usually get most or all of what you value most.

Software

These are very early days for the OLPC software (alpha test). The "Sugar" user interface environment for children is in place, though Sugar has activity launch performance problems we are actively investigating while starting applications (activities). There are user interface issues we intend to fix. The OLPC Human Interface Guidelines should be observed when building or repackaging applications. Conventional human interface guidelines have been designed for first world office workers, and are totally unsuitable for children who are just learning to read in any part of the world. As young children are the many/most of the intended audience of our system, their needs are being met first.

Conversion of applications to function under Sugar is very straightforward and most applications can work with little change.

Installation

How to upgrade BIOS firmware

Warning! Warning!

The current BTest units should NOT have their firmware upgraded by the previous methods. The Linux 'olpcflash' tool and the OpenFirmware 'flash' command will erase the manufacturing data that was written by the factory. The tools are currently in progress of being updated so that they will preserve the manufacturing data across a firmware upgrade.

                       How to install/upgrade OLPC Fedora
                       How to upgrade Marvell firmware

Device Driver Notes

The sensor input mode of the audio hardware is not present in the audio driver of build 185
It awaits merging shortly.
SD high speed mode is not yet supported in the driver in Build 185
High speed cards themselves work fine, but will not get above 8MB/second transfer rate.
Suspend/Resume not yet implemented
This is up next on our agenda.
Functional Wireless Driver
The driver is functional, though still somewhet buggy, and it is still undergoing major work, and the Marvell's boot2 code has yet to be deployed.

X Window System

The X Window System does not yet support the RandR extension, (rotation of the screen).

If a console application manages to somehow modify the colormap, the system won't recover without rebooting the machine.

We are not happy with the behavior of the touchpad: how much of this is hardware and how much software remains to be determined. The writing (stylus) mode of the touchpad has been disabled in the BTest-1 units, as the hardware does not work properly and is being redesigned.

Much performance optimization work is possible, and awaits our time or volunteers to work on.

The X Window System Xvideo extension is supported in the X server; note that a slightly different colormap is loaded while video is playing to improve video quality; other colors in use may become slightly strange during this period.

The keymaps for our initial set of keyboards are only installed when Build 185 is installed
There are known issues with the keyboard descriptions.

User Interface

Sugar

intent and goals

                               presence
                               collaboration

Navigation

                               personal
                               friends
                               mesh
                               world
                               search
                               Journal (someday) 

Release Notes

Sugar seems to lock up with the frame out
Pressing F5 allows the Sugar to unhang, and you can then launch applications again.
Sugar needs a UI for controlling audio
This needs to be written.
Sugar presumes applications exit
Usually, you can find some other way to cause an application to exit.
Launching activities are slow
This is under investigation.

Programming Sugar

                               Sugar interfaces
                               goocanvas
                               GTK+
                               Cairo
                               Pango/ATK

Activities

Web Browsing

chat

EToys

The EToys learning environment has been integrated into the Sugar environment, and you are encouraged both to visit the Squeakland site. Sugar EToys has information specific to EToys in our Sugar environment.

TamTam???

Temporary placeholders and Missing Pieces

There is no user interface for controlling the audio input/output. The workaround right now is to use "alsamixer" in a terminal window.

Our plans include a web server and wiki system and journal, with a simple what you see is what you get editor. These did not make BTest-1.

As a place-holder, a simplified version of Abiword was provided. Some version of Abiword will be included long term, at a minimum as a viewer, as it has the ability to read Microsoft .doc format files reasonably well.

Video/Camera Player

The controls (brightness, hue, saturation) are not hooked up in the device driver or video player applcation in BTest-1 (build 185). The driver adding these controls to Alsa (the Advanced Linux Sound Architecture) will be merged in a build soon.

The camera is exhibiting more noise than expected in assembled units; whether this is hardware or software is to be determined.

We have used mplayer on the machine, but as it pulls in many dependencies, we put together a simple gstreamer based application for demonstration of the camera and video playing. Others have reported successful playback of videos and DVD's on the system.

Abiword

Base system

OLPC Platform

Inventory of "permanent" packages Inventory of "debug" packages Inventory of "optional" packages (?)

Development environment

                               Languages - Logo, javascript, python
                               Libraries
                       Where to find source            
                       Internationalization/Localization

Other software known to work

                       Flash
                       Helix player
                       ...

How to Contribute

dev.laptop.org

                               git
                                       general hosting offer
                                       olpc-2.6 repository
                                       fedora kernel image
                               trac
                               wiki
                               mailing lists
                               who is who

pointers to key technology organizations

                               gnome, X.org, Cairo, gtk+, kernel.org,
                                mozilla,etc.

content

                               public
                               contacts at OLPC

Contacts

                               contacts at OLPC