OLPC Firmware Q2A53: Difference between revisions
Jump to navigation
Jump to search
Line 37: | Line 37: | ||
For more info see [[Upgrading_to_LinuxBIOS#Checking_your_DRAM_type]] |
For more info see [[Upgrading_to_LinuxBIOS#Checking_your_DRAM_type]] |
||
[[Image:olpc-Q2A53_CL2.5.rom]] |
[[Image:olpc-Q2A53_CL2.5.rom]] |
||
Revision as of 23:01, 1 December 2006
This page is monitored by the OLPC team.
OLPC Firmware Production Release Q2A53 - 2006-12-1
This is the update release for the B-test build.
MD5
a1af762465a6b2a0a8939d51d6e31f9e olpc-Q2A53.rom
Changes since Q2A52
- OFW: Some nand write fixes for spurious errrors
- OFW: Fix a build error on ATest due nand fixes.
Installation Caveats
- After you reflash, you must power cycle by physically removing power from the system. A warm-start or button-induced restart is not sufficient. Please remove both the battery pack and wall adapter for 10 seconds.
ATest users only: If you use olpcflash to write this image, you must use the --brick option.
Example: olpcflash --brick -w image.rom
This will update your EC code.
BTest-1 users should NOT use olpcflash to write new firmware images. Doing so will erase the manufacturing data that was added at the factory.
Known issues
- Auto-repeat is slow on some USB keyboards
- NVRAM storage for configuration variables is not yet implemented.
- JFFS2 does not pay attention to the bad block table.
- JFFS2 does not handle ECC
- The boot menu is incomplete
- Dirctory symlinks have a problem.
ATest -- Infineon RAMs only
Thise is a special purpose image. Do not use except on A-test boards with Infineon RAMS.
For more info see Upgrading_to_LinuxBIOS#Checking_your_DRAM_type
MD5:
2331a33116b65bd885c1efcfdf02a6e7 olpc-Q2A53_CL2.5.rom