OLE Nepal:Schoolserver: Difference between revisions
No edit summary |
No edit summary |
||
| Line 4: | Line 4: | ||
The schoolserver is a desktop with a minimum 1gb of memory and a minimum of 160gb hard drive capacity. Specifically, |
The schoolserver is a desktop with a minimum 1gb of memory and a minimum of 160gb hard drive capacity. Specifically, |
||
the server should provide 2gb of disk space for each supported XO. It must have support usb including the ability to |
the server should provide 2gb of disk space for each supported XO. It must have support usb including the ability to |
||
boot from usb. |
boot from usb. If the server cannot boot from usb or the boot sequence does not have usb ahead of the hard drive, it |
||
must have a cd reader. It must have two NIC interfaces. Normally, one of these is provided on the motherboard. The second is |
|||
normally an added pci card. Server installation and administration does not require a monitor, keyboard, or mouse. |
normally an added pci card. Server installation and administration does not require a monitor, keyboard, or mouse. |
||
In addition to the server, the second NIC is connected to an Access Point (e.g Lontech WL54G-BR). The Access Point must |
In addition to the server, the second NIC is connected to an Access Point (e.g Lontech WL54G-BR). The Access Point must |
||
Revision as of 22:22, 27 November 2008
Schoolserver
The schoolserver provides many services in support of the XO laptops.
Schoolserver Hardware
The schoolserver is a desktop with a minimum 1gb of memory and a minimum of 160gb hard drive capacity. Specifically, the server should provide 2gb of disk space for each supported XO. It must have support usb including the ability to boot from usb. If the server cannot boot from usb or the boot sequence does not have usb ahead of the hard drive, it must have a cd reader. It must have two NIC interfaces. Normally, one of these is provided on the motherboard. The second is normally an added pci card. Server installation and administration does not require a monitor, keyboard, or mouse. In addition to the server, the second NIC is connected to an Access Point (e.g Lontech WL54G-BR). The Access Point must be configurable via an http address.
NEXS
NEXS is the software installed on the server. NEXS 1.0 is installed currently at the pilot schools. NEXS 2.0 is currently in test and will be installed beginning in December 2008. NEXS 3.0 is planned for installation in schools in the new school year beginning April 2009.
NEXS 2.0 is derived from OLPC_XS-0.4 by the NEXS build script and installed on a USB drive. The Kickstart install script is modified to enable an install on a server without a monitor or keyboard. When the server is rebooted after the install is completed, a configuration script is run which completes the system configuration except for local network specifics. When the server has been restarted, the deployment team NEXS installation procedure will log in from an XO to run the netsetup script which completes the network configuration based on parameters specific to that school.
Services
The schoolserver provides the following services:
- protected access to the internet for the associated laptops via DansGuardian
- backup storage for the XO's datastore
- access to Pustakalaya, a library of educational materials maintained on the server
- access to educational activities via Moodle
- access to additional activities which the user of an XO can install or update via the XO control panel
- provides a higher capacity mesh network through the attached AP using ejabberd, a jabber server
- provides automatic authentication for XO users so that the conventional username and password login is unnecessary.