XO A: Difference between revisions

From OLPC
Jump to navigation Jump to search
No edit summary
Line 1: Line 1:
{{OLPC}}
XO Alpha test model A-Test, also known as A1, or just A.
[[Hardware#XO_Laptop|XO Laptop]] Alpha test model A-Test, also known as A1, or just A.


Power up of the first OLPC XO electronics prototype boards occurred April 15, 2006. Power and ground testing continued over the weekend, and formal debug and BIOS bring up started Monday, April 17, 2006 at Quanta Computer's labs near Taipei, Taiwan. By Wednesday, April 19, Linux was booting on the first generation prototypes.
Power up of the first OLPC XO electronics prototype boards occurred April 15, 2006. Power and ground testing continued over the weekend, and formal debug and BIOS bring up started Monday, April 17, 2006 at Quanta Computer's labs near Taipei, Taiwan. By Wednesday, April 19, Linux was booting on the first generation prototypes.

Revision as of 05:09, 6 January 2009

  This page is monitored by the OLPC team.

XO Laptop Alpha test model A-Test, also known as A1, or just A.

Power up of the first OLPC XO electronics prototype boards occurred April 15, 2006. Power and ground testing continued over the weekend, and formal debug and BIOS bring up started Monday, April 17, 2006 at Quanta Computer's labs near Taipei, Taiwan. By Wednesday, April 19, Linux was booting on the first generation prototypes.

Identification

  • bare circuit board, no case,

Photographs:

Software Support

A-Test is no longer supported by OLPC software releases. Do not load E-, D- or C-series firmware (e.g. Q2E18) on A-Test machines.

Restrictions

  • wireless is not encased,
  • no longer included in testing,
  • last known working firmware: ?
  • last known working operating system build: ?
  • some units had RAM that did not meeting CAS timing specification, code was added to Open Firmware to detect and compensate.

Followed by

Preceeded by

  • a glimmer in Mark Foster's eye