XO Hospital: Difference between revisions
Jump to navigation
Jump to search
| (3 intermediate revisions by 2 users not shown) | |||
| Line 6: | Line 6: | ||
=== Tools === |
=== Tools === |
||
* Screw drivers |
* Screw drivers (a #1 Phillips at least, preferably magnetized) |
||
* Tweezers (for extracting small screws which have a habit of winding up under things when you try to remove them from the XO) |
|||
* USB drives (these should have different builds, and activities) |
* USB drives (these should have different builds, and activities) |
||
* Pliers (for orienting the hinge) |
* Pliers (for orienting the hinge) |
||
| Line 16: | Line 17: | ||
* Power cords |
* Power cords |
||
* A good-quality digital multimeter |
* A good-quality digital multimeter |
||
* Headphones which can be plugged into the XO's audio output jack |
|||
* Microphone which can be plugged into the XO's audio input jack |
|||
=== XO Replacement Parts === |
=== XO Replacement Parts === |
||
| Line 27: | Line 30: | ||
* Small motherboard Battery |
* Small motherboard Battery |
||
* Heat Spreader |
* Heat Spreader |
||
* A supply of narrow-gauge double-sided tape |
|||
=== Organizational === |
=== Organizational === |
||
* Reasonably secure, relatively dust-free indoor work space if possible. |
|||
| ⚫ | |||
* |
* Workbench, table and chairs |
||
* Good work light |
|||
* Shelves |
|||
* Storage cabinet |
|||
| ⚫ | |||
* Anti-static mats and anti-stat. wrist grounding straps. |
* Anti-static mats and anti-stat. wrist grounding straps. |
||
** The lower the humidity, the greater the need, in general. |
** The lower the humidity, the greater the need, in general. |
||
Latest revision as of 14:54, 7 January 2009
|
NOTE: The contents of this page are not set in stone, and are subject to change! This page is a draft in active flux ... |
|
An XO hospital is a basic repair center. It is a place where you can diagnose and repair XO's. This page outlines a model for the physical organization of the repair center with a list of the things you will need for the repair center.
Things you should have
Tools
- Screw drivers (a #1 Phillips at least, preferably magnetized)
- Tweezers (for extracting small screws which have a habit of winding up under things when you try to remove them from the XO)
- USB drives (these should have different builds, and activities)
- Pliers (for orienting the hinge)
- A working computer with internet preferably not an XO
Diagnostic Tools
- A working XO carcass so that you can swap in parts for testing
- Extra batteries
- Power cords
- A good-quality digital multimeter
- Headphones which can be plugged into the XO's audio output jack
- Microphone which can be plugged into the XO's audio input jack
XO Replacement Parts
- Screen
- Motherboard
- Keyboard
- ASL board (touchpad)
- Batteries
- Extra Plastic pieces
- Small motherboard Battery
- Heat Spreader
- A supply of narrow-gauge double-sided tape
Organizational
- Reasonably secure, relatively dust-free indoor work space if possible.
- Workbench, table and chairs
- Good work light
- Shelves
- Storage cabinet
- Plastic Bins, anti-static, if possible, or else good wooden ones. They are not likely to generate static.
- Anti-static mats and anti-stat. wrist grounding straps.
- The lower the humidity, the greater the need, in general.
Guide
Organization
Separate bins for different parts. See Model Repair Center for some pictures of an organized repair center.
Information
See the XO Troubleshooting Guide for information on troubleshooting problems.
See the Disassembly page for information on how to actually do a repair.