XO1.5 Bringup: Difference between revisions
Jump to navigation
Jump to search
(→Tools) |
|||
| Line 38: | Line 38: | ||
== Sequence == |
== Sequence == |
||
* Richard goes first, brings up EC and power rails with Gary |
* Richard goes first, brings up EC and power rails with Gary & Bryan Ma. |
||
* Wad, Mitch, and Via BIOS/memory engineer arrive shortly thereafter, bring up memory controller |
* Wad, Mitch, and Via BIOS/memory engineer arrive shortly thereafter, bring up memory controller |
||
* Harald arrives after OFW is working, brings up Linux |
* Harald arrives after OFW is working, brings up Linux |
||
Revision as of 20:46, 29 April 2009
This page lists goals and plans for initial bringup of the XO1.5 board.
Goals
- EC working
- Memory controller working and memory stable (memtest86)
- OLPC display working
- Keyboard/mouse working
- USB working
- SD memory cards working
- Boots Linux kernel from SD card
- Rudimentary power management tests from OFW
- X?
Non-goals
- Camera input (driver won't be ready in time)
- Power management from Linux
- SDIO WLAN
- Audio
Personnel in Taiwan
- Wad, Richard, and Mitch from OLPC
- Gary from Quanta
- Harald and BIOS/memory controller expert from Via
Tools
- Cheetah SPI programmer qty 1
- Artec LPC dongle (FLASH + port 80) qty 3 (including Mitch's)
- Quanta LPC port 80 dongle
- Cleverscope qty 1
- PROMjet SPI FLASH emulator qty 1
- OLPC serial port dongles + cables qty 5
- High speed oscilloscope for memory checkout - Quanta to supply
Sequence
- Richard goes first, brings up EC and power rails with Gary & Bryan Ma.
- Wad, Mitch, and Via BIOS/memory engineer arrive shortly thereafter, bring up memory controller
- Harald arrives after OFW is working, brings up Linux
- Team members work in parallel on the respective areas of expertise, hopefully with several boards