XO1.5 1.2V power sequencing ECO: Difference between revisions

From OLPC
Jump to navigation Jump to search
(New page: =Scope= This describes a change to early prototypes of the XO-1.5 motherboard. It fixes a problem with the sequencing of power supply turn-on to the VX855 chip. This only applies to XO-...)
 
(Original edits done by me (forgot to login))
Line 13: Line 13:


=Results=
=Results=

This page is still a scratchpad testing a hypothesis.


Done to:
Done to:

Revision as of 03:31, 20 June 2009

Scope

This describes a change to early prototypes of the XO-1.5 motherboard. It fixes a problem with the sequencing of power supply turn-on to the VX855 chip.

This only applies to XO-1.5 A-phase (both A1 and A2) motherboards.

Procedure

  1. Remove R234. Use one pad to provide PRE_MAIN_ON.
  2. Lift PU7, pin 6 (near PL6) and tie it to PRE_MAIN_ON.
  3. Tie the MAIN_ON signal to +1.2V_GD.
  4. Remove PR67 (This is a quick fix. Ideally, pin 2 of PQ20 should be lifted and tied to an inverted, high voltage version of PRE_MAIN_ON).

Results

This page is still a scratchpad testing a hypothesis.

Done to: