Pitivi on Fedora Core 11: Difference between revisions

From OLPC
Jump to navigation Jump to search
No edit summary
No edit summary
Line 2: Line 2:
These instructions assume that you have available an XO that you can wipe clean with a new OS installation.
These instructions assume that you have available an XO that you can wipe clean with a new OS installation.
#(I'm not sure whether or not this first step is necessary. These steps led to success once!). Since I was starting with a secure XO (no developer key) I downloaded the 802 build, rebooted with the 4 game keys held, and the NAND and firmware were updated. Requested a developer key, and got it the next day. See http://wiki.laptop.org/go/Activation_and_Developer_Keys#Getting_a_developer_key_for_your_running_XO_laptop The firmware is the unknown. Did having the firmware at 2QE41 level contribute to my success?
#(I'm not sure whether or not this first step is necessary. These steps led to success once!). Since I was starting with a secure XO (no developer key) I downloaded the 802 build, rebooted with the 4 game keys held, and the NAND and firmware were updated. Requested a developer key, and got it the next day. See http://wiki.laptop.org/go/Activation_and_Developer_Keys#Getting_a_developer_key_for_your_running_XO_laptop The firmware is the unknown. Did having the firmware at 2QE41 level contribute to my success?
http://wiki.laptop.org/go/Activation_and_Developer_Keys
#The FC11 OS image is not signed, so you will need to turn off the firmware security system see http://wiki.laptop.org/go/Activation_and_Developer_Keys#Disable_the_security_system
#The FC11 OS image is not signed, so you will need to turn off the firmware security system see http://wiki.laptop.org/go/Activation_and_Developer_Keys#Disable_the_security_system
#Download the OS4.IMG and OS4.CRC files from http://dev.laptop.org/~smparrish/xo-1/builds/ onto a FAT or FAT32 formatted USB disk.
#At the boot prompt of an unlocked XO enter "copy-nand u:OS4.IMG". Wait.
#I powered the XO off just to make sure everything was starting at ground zero. (just entering "boot" at the prompt may work).
#Get the XO talking to the internet via your wifi access point, as usual.
#Execute the following:
su -
yum -y install gtk2-libglade pitivi
exit
mkdir -p /home/olpc/.local/share

Revision as of 10:57, 18 August 2009

Instructions for installing Pitivi, a nonlinear video editor in Python/Gtk on top of a Gstreamer engine

These instructions assume that you have available an XO that you can wipe clean with a new OS installation.

  1. (I'm not sure whether or not this first step is necessary. These steps led to success once!). Since I was starting with a secure XO (no developer key) I downloaded the 802 build, rebooted with the 4 game keys held, and the NAND and firmware were updated. Requested a developer key, and got it the next day. See http://wiki.laptop.org/go/Activation_and_Developer_Keys#Getting_a_developer_key_for_your_running_XO_laptop The firmware is the unknown. Did having the firmware at 2QE41 level contribute to my success?
  2. The FC11 OS image is not signed, so you will need to turn off the firmware security system see http://wiki.laptop.org/go/Activation_and_Developer_Keys#Disable_the_security_system
  3. Download the OS4.IMG and OS4.CRC files from http://dev.laptop.org/~smparrish/xo-1/builds/ onto a FAT or FAT32 formatted USB disk.
  4. At the boot prompt of an unlocked XO enter "copy-nand u:OS4.IMG". Wait.
  5. I powered the XO off just to make sure everything was starting at ground zero. (just entering "boot" at the prompt may work).
  6. Get the XO talking to the internet via your wifi access point, as usual.
  7. Execute the following:
su -
yum -y install gtk2-libglade pitivi
exit
mkdir -p /home/olpc/.local/share