Release notes/10.1.2: Difference between revisions

From OLPC
Jump to navigation Jump to search
(replace with template)
Line 52: Line 52:
Developers are working on rotation support in the graphics driver. (<trac>9350</trac>)
Developers are working on rotation support in the graphics driver. (<trac>9350</trac>)


=== XO-1.5 Record activity video recording may pause ===
=== Record activity video recording may pause ===


When recording a video of a very complex natural scene, such as moving vegetation, in ''High'' quality, the recording may pause. If this happens, reducing camera movement may allow the laptop to catch up. Alternatively, switch to ''Low'' quality and try again.
When recording a video of a very complex natural scene, such as moving vegetation, the recording may pause. If this happens, reducing camera movement may allow the laptop to catch up. The pause is visible on playback.

On XO-1.5, switch to ''Low'' quality and try again. XO-1 only has ''Low'' quality.

In the previous release 8.2.1, the pause was spread throughout the recording, lowering the effective frame rate. In this release the frame rate is kept as fast as possible until the pause is unavoidable.


=== XO-1.5 Record activity preview black on lid close and open ===
=== XO-1.5 Record activity preview black on lid close and open ===

Revision as of 05:45, 29 July 2010


Pencil.png NOTE: The contents of this page are not set in stone, and are subject to change!

This page is a draft in active flux ...
Please leave suggestions on the talk page.

Pencil.png
  This page is monitored by the OLPC team.
  For the general public

This release is not yet complete.

Purpose

An update to software release 10.1.1 for both XO-1 and XO-1.5 laptops.

Installation

XO-1.5

How to install unsigned build os302 of release 10.1.2 on XO-1.5.

The build is installed to the internal microSD device. You will need a USB drive of at least 1 GB capacity, but only for the duration of the installation.

ALL USER DATA WILL BE ERASED FROM THE LAPTOP!

  • Prepare the USB drive:
    • Download os302.zd,
    • Save the file to the top directory of the USB drive,
  • Prepare the laptop:
    • Make a copy of any data you wish to keep,
    • Obtain a Developer key and disable security,
    • Check the battery is inserted and locked,
    • Check that the power cord is in place and the battery indicator is green,
    • Turn off the laptop, unless it is already off,
    • Insert the USB drive into any USB port on the laptop,
  • Start installing:
    • Obtain the Ok prompt,
    • Type the command:
fs-update u:\os302.zd

Installation progress will be displayed. Green colour will fill grey blocks. It will take about ten minutes. Once finished, the Ok prompt will return. Remove the USB drive. The laptop must be rebooted using bye or the power button, not with the boot command. The USB drive can be used on other laptops.


XO-1

How to install unsigned build os302 of release 10.1.2 on XO-1.

The build is installed to the internal NAND flash device. You will need a USB drive of at least 1 GB capacity, but only for the duration of the installation.

ALL USER DATA WILL BE ERASED FROM THE LAPTOP!

  • Prepare the USB drive:
    • Download os302.img,
    • Save the file to the top directory of the USB drive,
    • Download os302.crc,
    • Save the file to the top directory of a USB memory stick,
    • Check the USB drive contains at least the two files os302.img and os302.crc
  • Prepare the laptop:
    • Make a copy of any data you wish to keep,
    • Obtain a Developer key and disable security,
    • Check the battery is inserted and locked,
    • Check that the power cord is in place and the battery indicator is green,
    • Turn off the laptop, unless it is already off,
    • Insert the USB drive into any USB port on the laptop,
  • Start installing:
    • Obtain the Ok prompt,
    • Type the command:
copy-nand u:os302.img

Installation progress will be displayed. Green colour will fill yellow blocks. It will take about five minutes. Once finished, the Ok prompt will return. Remove the USB drive. The laptop may be rebooted. The USB drive can be used on other laptops.


Upgrade

You may wish to upgrade from a previous version of the XO-1.5 operating system. This method preserves most user data, Sugar journal and installed Sugar activities, but does not preserve certain operating system customisations such as additional packages.

Since activities are not updated, several known problems will remain. Most but not all of these can be fixed using Software update.

To use this method, establish an internet connection, and launch the Terminal Activity.

For XO-1, then type:

  olpc-update 10.1.2_xo1-302

For XO-1.5, then type:

  olpc-update 10.1.2_xo1.5-302

A few previous versions do not support this method.

New features

to be completed

Known Problems

XO-1.5 No screen rotation

The screen rotation key (on the bottom left of the display) does not rotate the screen image. It is safe to use, but makes no change.

Developers are working on rotation support in the graphics driver. (<trac>9350</trac>)

Record activity video recording may pause

When recording a video of a very complex natural scene, such as moving vegetation, the recording may pause. If this happens, reducing camera movement may allow the laptop to catch up. The pause is visible on playback.

On XO-1.5, switch to Low quality and try again. XO-1 only has Low quality.

In the previous release 8.2.1, the pause was spread throughout the recording, lowering the effective frame rate. In this release the frame rate is kept as fast as possible until the pause is unavoidable.

XO-1.5 Record activity preview black on lid close and open

With the Record activity on screen displaying a preview of the camera image, closing the laptop lid for long enough to cause a suspend, and then opening it, results in the preview going black.

If this happens, the preview can be restored by pressing Alt/Tab, or switching between Sugar views using the keyboard keys or the frame icons.

The black preview does not affect the taking of photographs, or recording of video. If a video recording is being made, there will be a segment of time missing in the playback.

Developers are aware of the problem. (<trac>10068</trac>)

Bugs fixed

os300

  • not determined, however all bugs fixed in release 10.1.0 and 10.1.1 should apply.

os301

  • <trac>10207</trac>, powerd: Fix wake on LAN
  • <trac>10208</trac>, kernel: Fix "disable wlan" control panel
  • <trac>10209</trac>, sugar: Fix "Start" menu item on activity palette in Sugar
  • <trac>10211</trac>, NetworkManager: Fix sporadic mesh connection failure
  • <trac>10214</trac>, kernel: Fix gstreamer segfault when using Record
  • <trac>10221</trac>, kernel: Fix wlan activity LEDs
  • <trac>10219</trac>, Browse: Re-add standard content bundles
  • <trac>10228</trac>, kernel: Fix screen blanking events on the VT
  • Set nautilus to "browser mode" by default
  • Turn on idle-suspend by default
  • Temporarily disable pretty boot, to diagnose boot hangs like <trac>9100</trac>

os302

  • <trac>10213</trac>, <trac>10249</trac>: XO-1.5 High School fixes for frame and { keys
  • <trac>10245</trac>: Fix brightness keys
  • New versions of Distance (<trac>10259</trac>), Measure (<trac>10248</trac>), Record
  • SocialCalc unintentionally present in this build; will be removed in next.