Sugar on Ubuntu: Difference between revisions

From OLPC
Jump to navigation Jump to search
mNo edit summary
 
(121 intermediate revisions by 64 users not shown)
Line 1: Line 1:
{{jhbuild-nav}}
The easiest way to install [[Sugar]] on Ubuntu is to use [[Sugar with sugar-jhbuild|Sugar-jhbuild]]. The instructions on this page are for [[Ubuntu]] 6.10 "Edgy Eft" on x86 (building seems to be currently broken on x86_64).


== apt-get the prerequisites ==
== Page moved to Sugar Labs ==

You need a number of packages from the Ubuntu repositories. Some of these packages are not available for the stock Ubuntu install, and you will need to enable the ''universe'' and ''multiverse'' repositories.

<pre>
sudo apt-get install build-essential cvs docbook-utils subversion libgtk2.0-dev libidl-dev \
gnome-common gtk-doc-tools libxt-dev automake1.7 automake1.8 automake1.9 python-gtk2-dev \
python-avahi git-core cogito python-dev avahi-utils \
libgconf2-dev xserver-xephyr libgnome2-dev libmatchbox-dev python-cairo-dev \
libtiff4-dev python-gnome2-dev libxdamage-dev libxdamage1 libxcomposite-dev \
libgnomeui-dev libtool libfribidi-dev libgsf-1-dev libbz2-dev libwmf-dev \
libgstreamer0.10-dev libgstreamer-plugins-base0.10-dev libgnomeprintui2.2-dev \
libenchant-dev libnspr-dev darcs libxslt1.1 libxslt1-dev firefox firefox-dev \
libasound2-dev sqlite3 libsqlite3-dev libssl-dev libncurses5-dev
</pre>

Even with the universe and multiverse enabled you can have some problems installing these packages.
You can fix them using the sources.list generator that you can find on [http://www.ubuntu-nl.org/source-o-matic/ www.ubuntu-nl.org].

There may be more packages required; if you find any more, please append them to this list.

<pre>Note:I needed to install libgnomeui-dev version 2.16.1, libgnomeuimm-2.6-1c2a, and
libgnomeuimm-2.6-dev. I no longer get the error "package libgnomeui-2.0 cannot be found"
however I still encounter other errors [chundevi]</pre>

<pre>I was building and edgy based VM from a debootstrap base and using edgy packages. I needed to install librsvg2-common before sugar would run.</pre>

Note: If you get the error "package python-avahi not available" try this-
<pre>On PPC, I used the following command sudo apt-get install build-essential cvs docbook-utils subversion libgtk2.0-dev libidl-dev \
gnome-common gtk-doc-tools libxt-dev automake1.7 automake1.8 automake1.9 python-gtk2-dev git-core python-dev libgconf2-dev libgnome2-dev \
python-cairo-dev libtiff4-dev python-gnome2-dev libxdamage-dev libxdamage1 libxcomposite-dev libgnomeui-dev libtool libfribidi-dev \
libgsf-1-dev libbz2-dev libwmf-dev libgstreamer0.10-dev libgstreamer-plugins-base0.10-dev libgnomeprintui2.2-dev libenchant-dev

~~~~
</pre>

Then you must ensure that the Avahi daemon is enabled and running. Execute:

<pre>sudo vim /etc/default/avahi-daemon</pre>

and ensure the directive "AVAHI_DAEMON_START" is set to 1. Then execute:

<pre>sudo /etc/init.d/avahi-daemon start</pre>

--------
[[User:SRiggins|SRiggins]]:

I had to do a lot of work with the help of many to get Ubuntu Edgy to run Sugar. First off, you have to use the universe for apt-get, which you do by editing:

<pre>sudo pico /etc/apt/sources.list</pre>

and uncommenting the two entries for universe.

Then do the large apt-get at the top, and if there are still any missing packages, remove them from the list and try again.

Next, I installed Nework Manager, as mentioned on this page, but that broke all networking in Parallels, so I uninstalled it and the XO team fixed the build to not require it.

next, I ran these commands:

<pre>
sudo apt-get install libssl-dev libncurses5-dev
./sugar-jhbuild buildone -a loudmouth
./sugar-jhbuild buildone -a telepathy-gabble
./sugar-jhbuild buildone -a telepathy-python
./sugar-jhbuild buildone -a artwork
./sugar-jhbuild buildone -a sugar
</pre>

== Using Sugar-jhbuild ==

Use of Sugar-jhbuild is detailed on [[Sugar_with_sugar-jhbuild|building Sugar from sources]]. To summarize those instructions:

git-clone git://dev.laptop.org/sugar-jhbuild
cd sugar-jhbuild
./sugar-jhbuild

If you had already checked out sugar-jhbuild previously, make sure your copy is up-to-date before building:

cd sugar-jhbuild
git pull

== Troubleshooting ==

=== automake version mismatch ===

The following solution also applies in other situations. I ran into it when attempting:

./sugar-jhbuild build-base

make died while building fontconfig on a Ubuntu Dapper box with a missing separator error.

During the building task you may get the following error:

error during stage configure of matchbox-window-manager:....[9/12]

This error happens because Ubuntu uses the automake 1.4 version in contrast with matchbox-window-manager which uses the automake 1.9 version. In order to bypass this error you can execute the following command:

sudo update-alternatives --config automake

You will get the following list with the asterisk being at the 1 selection

There are 3 alternatives which provide `automake'.
Selection Alternative
+ 1 /usr/bin/automake-1.4
2 /usr/bin/automake-1.7
* 3 /usr/bin/automake-1.9
Press enter to keep the default[*], or type selection number:

Here you should press the button 3 and the try again to build sugar.

=== Mozilla Build Error ===

You may get stuck at a Mozilla build error - I did on Edgy AMD64. Two ways to resolve the problem, either:
sudo aptitude install libxul-dev
which may not work, or copy the Mozilla or Firefox .pc files in /usr/lib/pkgconfig to xulrunner-*.pc files (You may only need to create xulrunner-gtkmozembed.pc and not the rest...). Either way, then, build with ./sugar-jhbuild build -s mozilla to skip building Mozilla from source. I have not yet completed a full Sugar build, though, so these instructions may just be masking a problem. --RP

=== Building libabiword ===

If you get an error like

<pre>
*** Building libabiword *** [24/35]

<...>

I can't seem to figure out which platform you are using.

You should probably try using the autoconfiscated build system (rather
than this, the deprecated and unsupported diving make system) by running
configure (creating it with autogen.sh if need be) and using GNU Make.
Using configure is a requirement for all known platforms that aren't some form
of Windows, QNX Neutrino, or MacOS X.
</pre>

just choose the "configure" option. This error shows up (probably) because AbiWord has a regular Makefile setup for building on Windows in addition to AutoConf stuff for nearly every other platform, so it is just "faking out" jhbuild in all likelyhood.

=== git, the SCM ===

On Ubuntu 6.06 Dapper Drake, git has been deprecated. You have to run the following command to get git to work properly.

sudo update-alternatives --config git
Select option #2: git-scm

=== network manager error ===

If, after running <tt> ./sugar-jhbuild run</tt> you get the following error:
DBusException: Connection ":1.12" is not allowed to own
the service "org.freedesktop.NetworkManagerInfo" due to
security policies in the configuration file
you have two solutions

==== Method 1 : Install NetworkManager====

You want to ensure that the NetworkManager is
* installed
sudo apt-get install network-manager
* reachable by console applications, in file <tt>/etc/dbus-1/system.d/NetworkManager.conf</tt> add
<allow own="org.freedesktop.NetworkManagerInfo"/>
after
<policy at_console="true">
* started, by restarting the whole dbus
sudo /etc/init.d/dbus restart

==== Method 2 : Only provide .conf file ====

Copy the [http://cvs.gnome.org/viewcvs/*checkout*/NetworkManager/gnome/applet/nm-applet.conf?rev=1.2 configuration file] to <tt>/etc/dbus-1/system.d</tt> .
Restart the dbus as above.

=== os.py not finding sugar-emulator folder ===

The error message is:

./sugar-jhbuild run
Traceback (most recent call last):
File "./sugar-jhbuild", line 11, in ?
main.main(sys.argv[1:])
File "/home/barbolo/Desktop/sugar/sugar-jhbuild/main.py", line 104, in main
jhbuild.commands.run(command, config, args)
File "/home/barbolo/Desktop/sugar/sugar-jhbuild/build-scripts/jhbuild/jhbuild/commands/__init__.py", line 74, in run
return cmd.execute(config, args)
File "/home/barbolo/Desktop/sugar/sugar-jhbuild/build-scripts/jhbuild/jhbuild/commands/base.py", line 238, in execute
os.execlp(args[0], *args)
File "/usr/lib/python2.4/os.py", line 324, in execlp
execvp(file, args)
File "/usr/lib/python2.4/os.py", line 341, in execvp
_execvpe(file, args)
File "/usr/lib/python2.4/os.py", line 379, in _execvpe
func(fullname, *argrest)
OSError: [Errno 2] No such file or directory

The solution:

Edit the archive sugar-jhbuild/main.py:

Change line 101:

args.append('sugar-emulator')

for

args.append('/home/barbolo/Desktop/sugar/sugar-jhbuild/source/sugar/sugar-emulator')


Note that /home/barbolo/Desktop/sugar is where my sugar-jhbuild folder is located, so you may change it!

== Testing sugar ==

When using [[Sugar_with_sugar-jhbuild|sugar-jhbuild]], you can use:

./sugar-jhbuild run

If you want to run Sugar from the source tree enter in a jhbuild shell:

./sugar-jhbuild shell

Then use:

sugar-shell


'''This page has been [http://wiki.sugarlabs.org/go/Community/Distributions/Ubuntu moved] to the Sugar Labs wiki.'''


[[Category:Installing Sugar]]
[[Category:Installing Sugar]]
[[Category:Python]]

Latest revision as of 18:49, 25 September 2010

Developer's Setup
 Fedora
 Ubuntu
 Debian
 Gentoo
 Slackware
Wiki Category
modify 

Page moved to Sugar Labs

This page has been moved to the Sugar Labs wiki.