OLPC Firmware q3a62: Difference between revisions

From OLPC
Jump to navigation Jump to search
(Q3A62)
 
No edit summary
Line 1: Line 1:
{{OLPC}}
<nowiki>{{OLPC}}
{{Release Notes}}
{{Release Notes}}


Line 35: Line 35:


{{:Manual_Firmware_Identify|version=q3a62}}
{{:Manual_Firmware_Identify|version=q3a62}}
{{:Manual_Firmware_Install|version=q3a62}}
{{:Manual_Firmware_Install|version=q3a62}}</nowiki>

Revision as of 10:34, 18 December 2010

{{OLPC}} {{Release Notes}} == OLPC Firmware Release q3a62 == Fix screen glitch when resuming with rotated display and test /mouse issues. Works on XO-1.5 A1, A2, B1, B2, B3, C1 ,C2 and C3 systems, but does not work on any XO-1 machines. Download: [http://dev.laptop.org/pub/firmware/q3a62/q3a62.rom q3a62.rom] == Changes since q3a61 == === OpenFirmware [http://openbios.org/viewvc/?root=OpenFirmware svn 2085] Built 2010-12-17 15:54:25 === * svn 2054 - SDHCI - keep track of last 8 commands and display them when an error occurs. * svn 2065 - Increase external SD card power-up off time for a 32 G class 10 SD card being tested. * svn 2068 - Changed the check for NTLDR to be less language-sensitive. * svn 2070 - USB hub driver - added a configurable delay between port power-up and probing. * svn 2072 - OLPC trac #10521 - close audio device after playing startup sound so subsequent test /audio works right (resets the sample rate). * svn 2076 - SDHCI - restore previous delay for internal slot, adopt 250ms delay following tests with external slot. May be revisited with XO-1.75 A2 where only 1ms may be required. * svn 2079 - DSDT, enable THRM# GPIO (ebook) by default. * svn 2081 - OLPC trac #10547 - mouse driver was broken due to bad syntax for the unit address. * svn 2082 - Avoid set DCONLOAD during resume. * svn 2083 - Avoid wait for DCONBLNK. * svn 2084 - OLPC trac #10558 - test-all was skipping mouse and keyboard and fixed the mouse driver so it works with the AVC Sentelic touchpads. === EC code is version 2.0.1 === * no change === WLAN firmware is Libertas thinfirm 9.0.7.p2 === * no change {{:Manual_Firmware_Identify|version=q3a62}} {{:Manual_Firmware_Install|version=q3a62}}