OLPC Firmware q3a63/Test plan: Difference between revisions

From OLPC
Jump to navigation Jump to search
(Created page with '* verify ''machine-signature'' value is CL1 , * verify ''flash'' XO-1.75 firmware is prevented, * check that ''pong'' remains playable, * check output from ''.mppt'' is rational,…')
 
No edit summary
 
(4 intermediate revisions by the same user not shown)
Line 1: Line 1:
Completed testing.

* verify ''machine-signature'' value is CL1 ,
* verify ''machine-signature'' value is CL1 ,
** check,
* verify ''flash'' XO-1.75 firmware is prevented,
* verify ''flash'' XO-1.75 firmware is prevented,
** check,
* check that ''pong'' remains playable,
* check that ''pong'' remains playable,
** check,
* check output from ''.mppt'' is rational,
* check output from ''.mppt'' is rational,
** check,
* try the new ''bat-recover'',
* try the new ''bat-recover'',
** check, though mAh does not seem to climb,
* test USB hot plug behind hub, -r2152,
* test USB hot plug behind hub, -r2152,
** with no USB devices attached, boot to ok prompt, type ''dir u:'', expected response is ''Can't open directory'',
** with a USB device attached, boot to ok prompt, type ''dir u:'', expected response is directory contents,
** with no USB devices attached, boot to ok prompt, type ''dir u:'', expected response is ''Can't open directory'', insert a USB drive directly into a port, type ''dir u:'', expected response is directory contents,
** with only a USB hub attached, boot to ok prompt, type ''dir u:'', expected response is ''Can't open directory'', insert a USB drive into the hub, type ''dir u:'', expected response is directory contents,
** on Q3A62, repeat above test, response was ''Can't open directory''.
** check,
* test USB overcurrent response, on ports and via hub, -r2155,
* test USB overcurrent response, on ports and via hub, -r2155,
** using shorting plug on host port, all ports go unpowered, no error message,
** using shorting plug on hub port, hub indicator goes out, no error message,
** fail, test hub inadequate, or a failure to understand,
*** checked with wmb, a proper test needs lots of hubs and devices.
* check that internal microSD and external SD can be read repeatedly,
* check that internal microSD and external SD can be read repeatedly,
** ''dir int:\security many'',
** ''dir ext:\ many'', handled over 11k cycles before failure ''Can't open directory'', on repeat ''Unimplemented package interface procedure'', this is judged adequate,
** check,
* check that Linux kernel shows new device tree entries, -r2175,
* check that Linux kernel shows new device tree entries, -r2175,
** check,
* write code that uses new feature ''$case'' .
* write code that uses new feature ''$case'' .
** check,
** trivial stack effect comment fix, -r2188,

Latest revision as of 07:47, 14 April 2011

Completed testing.

  • verify machine-signature value is CL1 ,
    • check,
  • verify flash XO-1.75 firmware is prevented,
    • check,
  • check that pong remains playable,
    • check,
  • check output from .mppt is rational,
    • check,
  • try the new bat-recover,
    • check, though mAh does not seem to climb,
  • test USB hot plug behind hub, -r2152,
    • with no USB devices attached, boot to ok prompt, type dir u:, expected response is Can't open directory,
    • with a USB device attached, boot to ok prompt, type dir u:, expected response is directory contents,
    • with no USB devices attached, boot to ok prompt, type dir u:, expected response is Can't open directory, insert a USB drive directly into a port, type dir u:, expected response is directory contents,
    • with only a USB hub attached, boot to ok prompt, type dir u:, expected response is Can't open directory, insert a USB drive into the hub, type dir u:, expected response is directory contents,
    • on Q3A62, repeat above test, response was Can't open directory.
    • check,
  • test USB overcurrent response, on ports and via hub, -r2155,
    • using shorting plug on host port, all ports go unpowered, no error message,
    • using shorting plug on hub port, hub indicator goes out, no error message,
    • fail, test hub inadequate, or a failure to understand,
      • checked with wmb, a proper test needs lots of hubs and devices.
  • check that internal microSD and external SD can be read repeatedly,
    • dir int:\security many,
    • dir ext:\ many, handled over 11k cycles before failure Can't open directory, on repeat Unimplemented package interface procedure, this is judged adequate,
    • check,
  • check that Linux kernel shows new device tree entries, -r2175,
    • check,
  • write code that uses new feature $case .
    • check,
    • trivial stack effect comment fix, -r2188,