Vizio VTAB1008: Difference between revisions
(→Height) |
|||
| Line 46: | Line 46: | ||
|colspan=2| Back cover: 1.3mm |
|colspan=2| Back cover: 1.3mm |
||
|} |
|} |
||
The touchscreen is a multitouch projected capacitance screen, built with two layers of ITO on the same glass, with a insulating material between the two layers when they cross (known as single glass). The insulating material can be seen as a grid of dots when held at the right angle in sunlight. |
|||
The air gap is created by a rim of black foam, 0.8mm in height, placed right outside the active area of the display (mostly on the bezel). |
|||
The back cover has a cheap cast metal heat spreader, bonded to the outer plastic shell. |
|||
===Weight=== |
===Weight=== |
||
Revision as of 22:25, 4 August 2011
The Vizio VTAB1008 is almost identical to the XO-3, from a software point of view. It uses the Marvell Armada 610 and provides 512MB of memory and 4GB of eMMC storage.
Display
The display size is 8" diagonal w. 4:3 aspect ratio. The resolution is 1024x768.
Connectivity
The VTAB has 802.11b/g WiFi and Bluetooth, using a single antenna.
Location/Movement
The VTAB has both full GPS and an accelerometer.
Ports
- One USB OTG
- One mini HDMI output
- One microSD card, externally accessible (pry out the tab on the bottom edge near the USB/HDMI. ports)
Power
The VTAB has a 22Wh Li-Ion polymer battery.
Breakdown
Still in progress...
The tablet consists of a main PCB, two auxiliary PCBs, and the display sandwich.
Height
The tablet thickness is roughly 12.8mm in the middle. The height stackup is:
| Cover Glass: 1.9mm | |
| Air Gap: 0.8mm | |
| Display: 3.7mm | |
| Swell gap: 0.4mm | Main PCB: 4.8mm |
| Battery: 4.7mm | |
| Back cover: 1.3mm | |
The touchscreen is a multitouch projected capacitance screen, built with two layers of ITO on the same glass, with a insulating material between the two layers when they cross (known as single glass). The insulating material can be seen as a grid of dots when held at the right angle in sunlight.
The air gap is created by a rim of black foam, 0.8mm in height, placed right outside the active area of the display (mostly on the bezel).
The back cover has a cheap cast metal heat spreader, bonded to the outer plastic shell.
Weight
The tablet weight is roughly 580 grams. This breaks down as:
| Cover Glass/Bezel: 147g |
| Display: 179g |
| Main PCB: 45g |
| Battery: 116g |
| Back cover and side PCBs: 94g |