XO1.75 A3 Tinderbox: Difference between revisions
Jump to navigation
Jump to search
(3 intermediate revisions by the same user not shown) | |||
Line 66: | Line 66: | ||
|- align="center" |
|- align="center" |
||
| 21 || BL in || PR16 || 0.050 |
| 21 || BL in || PR16 || 0.050 |
||
- align="center" |
|- align="center" |
||
| 22 || LCD Analog in || PL2 || 0.100 |
| 22 || LCD Analog in || PL2 || 0.100 |
||
|- align="center" |
|- align="center" |
||
Line 72: | Line 72: | ||
|- align="center" |
|- align="center" |
||
| 24 || +1.8V DCON || PQ21.1 || 0.100 |
| 24 || +1.8V DCON || PQ21.1 || 0.100 |
||
|- align="center" |
|||
| 25 || +3.3V DCON || SP1 || 0.100 |
|||
|- align="center" |
|||
| 26 || +1.2V out || PJP13 || 0.100 |
|||
|- align="center" |
|||
| 27 || +2.5V out || PJP1 || 0.100 |
|||
|- align="center" |
|||
| 28 || +3.3V USB || PQ24.1 || 0.100 |
|||
|- align="center" |
|||
| 29 || +3.3V WLAN || Q15.3 || 0.100 |
|||
|- align="center" |
|||
| 30 || +1.8V WLAN || Q11.1 || 0.100 |
|||
|- align="center" |
|||
| 31 || +3.3V eMMC || R290 & R314 || 0.100 |
|||
|- align="center" |
|||
| 32 || +3.3V Audio || L26 & L44 || 0.100 |
|||
|- align="center" |
|||
| 33 || || || 0.100 |
|||
|} |
|} |
||
Latest revision as of 15:51, 11 August 2011
This page is monitored by the OLPC team.
This page describes the Tinderbox Power setup for the XO-1.75 A3 prototype.
Readings
It must be emphasized that these power measurements are a starting point! They will be improved (hopefully by leaps and bounds !) They are already a good improvement, in terms of power supply efficiency, over the A1/A2 numbers.
Example readings from the XO-1.75 A3 Tinderbox include:
- Linux when Idle
- Linux writing to the SD
- Linux w. USB key inserted
- Linux reading from a USB key
- 2.5W drawn from USB
- Others are at http://dev.laptop.org/~wad/xo1.75_a3/
Channels
These are the channels wired up to the Aligent 34980A voltmeter.
Channel | Name | Connection | Resistance |
---|---|---|---|
1 | DC In | PF1 | 0.056 |
2 | Vin | PJP16 | 0.010 |
3 | Vcore in | PJP12 | 0.050 |
4 | Vcore out | PJP8 | 0.010 |
5 | +3.3VSUS in | PJP15 | 0.100 |
6 | +3.3VSUS out | PJP10 | 0.025 |
7 | +3.3V EC | R262 | 0.100 |
8 | +1.5V in | PJP2 | 0.047 |
9 | +1.5V out | PJP3 | 0.025 |
10 | Vterm | PJP4 | 0.047 |
11 | +1.8V in | PJP14 | 0.100 |
12 | +1.8V out | PJP11 | 0.033 |
13 | DC In | PF1 | Voltage |
14 | Vin | PJP6 | Voltage |
15 | Vcore | PJP8 | Voltage |
16 | +3.3V in | PJP7 | 0.100 |
17 | +3.3V out | PJP9 | 0.033 |
18 | +5V in | PJP6 | 0.100 |
19 | +5V out | PJP5 | 0.033 |
20 | +5V USB | U9.7,8 | 0.050 |
21 | BL in | PR16 | 0.050 |
22 | LCD Analog in | PL2 | 0.100 |
23 | +1.8V LCD | PQ22.1 | 0.100 |
24 | +1.8V DCON | PQ21.1 | 0.100 |
25 | +3.3V DCON | SP1 | 0.100 |
26 | +1.2V out | PJP13 | 0.100 |
27 | +2.5V out | PJP1 | 0.100 |
28 | +3.3V USB | PQ24.1 | 0.100 |
29 | +3.3V WLAN | Q15.3 | 0.100 |
30 | +1.8V WLAN | Q11.1 | 0.100 |
31 | +3.3V eMMC | R290 & R314 | 0.100 |
32 | +3.3V Audio | L26 & L44 | 0.100 |
33 | 0.100 |
They are described to the tinderbox power measurement software by the cl2_a3.csv file.