Replacing a wireless module: Difference between revisions
Jump to navigation
Jump to search
Tonyforster (talk | contribs) (Created page with 'There are a number of incompatible WLAN modules which are the same size and use the same miniPCIe connector. The compatible module is only available from OLPC. Instructions: * d…') |
Tonyforster (talk | contribs) No edit summary |
||
| Line 8: | Line 8: | ||
* reassemble in the reverse order |
* reassemble in the reverse order |
||
* the software may not recognise the module without going through the first boot sequence so either delete /etc/udev/rules.d/70-persistent* or reflash the operating system |
* the software may not recognise the module without going through the first boot sequence so either delete /etc/udev/rules.d/70-persistent* or reflash the operating system |
||
[[File:Xo1.5wlan.jpg|400px]] |
|||
The XO-1.5 WLAN module |
|||
Revision as of 01:46, 27 October 2011
There are a number of incompatible WLAN modules which are the same size and use the same miniPCIe connector. The compatible module is only available from OLPC.
Instructions:
- disassemble the top Disassembly_top
- unplug the two tiny coax connectors vertically away from the board
- undo the single screw holding down the module
- unplug the module from the motherboard
- reassemble in the reverse order
- the software may not recognise the module without going through the first boot sequence so either delete /etc/udev/rules.d/70-persistent* or reflash the operating system
The XO-1.5 WLAN module