XO-1.75/Kernel/Issues: Difference between revisions

From OLPC
Jump to navigation Jump to search
Line 47: Line 47:
Tracing the point of hang by gradually adding printk has shown the problem occurs in dpm_resume(), before dpm_complete() is called by dpm_resume_end().
Tracing the point of hang by gradually adding printk has shown the problem occurs in dpm_resume(), before dpm_complete() is called by dpm_resume_end().


Adding a 60ms mdelay() per device within the dpm_resume() function, within the list processing, [http://dev.laptop.org/~quozl/z/1Rijw0.txt patch] has shown results [http://dev.laptop.org/~quozl/z/1Rijy3.txt t0], [http://dev.laptop.org/~quozl/z/1RijyO.txt t1]. Note that the elapsed time shows no correlation with the previous instances of the issue.
Adding a 60ms mdelay() per device within the dpm_resume() function, within the list processing, [http://dev.laptop.org/~quozl/z/1Rijw0.txt patch] has shown results [http://dev.laptop.org/~quozl/z/1Rijy3.txt C1 SKU201 after 27 suspend cycles], [http://dev.laptop.org/~quozl/z/1RijyO.txt C1 SKU202 after 9 suspend cycles]. Note that the elapsed time shows no correlation with the previous instances of the issue.

Revision as of 09:54, 5 January 2012

hang, mmp2-pcm-audio.0 resume

This is a hang with the last serial console message:

mmp2-pcm-audio mmp2-pcm-audio.0: resume

No FIQ. No SysRq. Always preceeded by a PM: Some devices failed to suspend.

Jon Nettleton says known problem. Caused by interrupted suspend, and during the unwind of the resume it hangs.

Can be worked around by removing the audio driver from the kernel.

Disabling runin-sound has no effect.

Seen within half an hour if SUS_TIME is set to 3000. Rarely or never seen if SUS_TIME is set to 10000.

Theory: once a suspend takes too long, the RTC alarm goes off before suspend has finished, and the suspend is interrupted, leading to this issue.

Impact: may trigger also with other wake sources, leading to a failed runin.

Instances:

Might be fixed by http://dev.laptop.org/git/olpc-kernel/commit/?h=arm-3.0-wip-wfi&id=92ef8264199818b91518f7fe7af365c5998381fa

hang, mmp2_pm_finish: Enable audio island

This is a hang shortly after the serial console message:

mmp2_pm_finish: Enable audio island

The time period may vary.

Only occurs with SUS_TIME not set to 3000.

Instances:

Diagnosis.

Tracing the point of hang by gradually adding printk has shown the problem occurs in dpm_resume(), before dpm_complete() is called by dpm_resume_end().

Adding a 60ms mdelay() per device within the dpm_resume() function, within the list processing, patch has shown results C1 SKU201 after 27 suspend cycles, C1 SKU202 after 9 suspend cycles. Note that the elapsed time shows no correlation with the previous instances of the issue.