IP Code: Difference between revisions
No edit summary |
|||
| Line 1: | Line 1: | ||
==Introduction== |
==Introduction== |
||
The IP Code, or "Degrees of protection provided by enclosures", is an international standard which defines the protection again water and dust provided by a device design. The normative |
The IP Code, or "Degrees of protection provided by enclosures", is an international standard which defines the protection again water and dust provided by a device design. The normative standard is ANSI/IEC 60529 Ed 2.1:2001, but many countries have their own name/number for an identical standard (e.g. Australian Standard AS 60529—2004). |
||
Protections under the standard are specified by an IP-''sw'' rating, where the first digit of the suffix (''s'') defines the resistance to solids intrusion, and the second digit of the suffix (''w'') defines the resistance to water intrusion. There can also be optional letters after the two digits, providing additional information. |
Protections under the standard are specified by an IP-''sw'' rating, where the first digit of the suffix (''s'') defines the resistance to solids intrusion, and the second digit of the suffix (''w'') defines the resistance to water intrusion. There can also be optional letters after the two digits, providing additional information. |
||
===Full Standard=== |
|||
The standard is available for free from the following standards organizations: |
|||
* [http://www.nema.org/stds/complimentary-docs/upload/ANSI_IEC%2060529.pdf NEMA] (PDF) |
|||
* [http://webstore.ansi.org/RecordDetail.aspx?sku=IEC+60529+Ed.+2.1+b+Cor.1:2003 ANSI] (PDF) |
|||
==Solid Intrusion== |
==Solid Intrusion== |
||
Revision as of 18:40, 16 January 2012
Introduction
The IP Code, or "Degrees of protection provided by enclosures", is an international standard which defines the protection again water and dust provided by a device design. The normative standard is ANSI/IEC 60529 Ed 2.1:2001, but many countries have their own name/number for an identical standard (e.g. Australian Standard AS 60529—2004).
Protections under the standard are specified by an IP-sw rating, where the first digit of the suffix (s) defines the resistance to solids intrusion, and the second digit of the suffix (w) defines the resistance to water intrusion. There can also be optional letters after the two digits, providing additional information.
Full Standard
The standard is available for free from the following standards organizations:
Solid Intrusion
The following levels of resistance to intrusion of solids into the device (laptop internals, in our case) are specified. In our case, hazardous parts refers to any active electrical circuit, even thought the voltages present on any XO are all classified as "low voltage" and considered safe.
Level 0 indicates that no protection is provided.
1 - Hand
The device is protected against access to hazardous parts with the back of a hand. A 5 cm diameter sphere shall be unable to access hazardous parts.
2 - Finger
The device is protected against access to hazardous parts with a finger. A 1.2cm diameter, 8cm long test finger shall be unable to access hazardous parts.
3 - Tool
The device is protected against access to hazardous parts with a tool. A 2.5mm diameter test probe shall be unable to access hazardous parts.
4 - Wire
The device is protected against access to hazardous parts with a wire. A 1.0mm diameter test probe shall be unable to access hazardous parts.
5 - Dust Protected
The standard reads: "Ingress of dust is not totally prevented, but dust shall not penetrate in a quantity to interfere with satisfactory operation of the apparatus or to impair safety"
The device is protected against access to hazardous parts with a wire.
6 - Dust Proof
No ingress of dust is allowed. The device is protected against access to hazardous parts with a wire.
Water Intrusion
The following levels of resistance to intrusion of liquids into the device (laptop internals, in our case) are specified.
Level 0 indicates that no protection is provided.
1 - Vertically Falling Drops
Vertically falling drops shall have no harmful effects on the laptop.
2 - Falling Drops
Vertically falling drops shall have no harmful effects when the laptop is tilted at any angle up to 15” on either side of the vertical.
3 - Spraying water
Water sprayed at an angle up to 60° on either side of the vertical shall have no harmful effects.
4 - Splashing water
Water splashed against the laptop from any direction shall have no harmful effects.
5 - Water Jets
Water projected in jets against the laptop from any direction shall have no harmful effects.
6 - Powerful Water Jets
Water projected in powerful jets against the laptop from any direction shall have no harmful effects.
7 - Temporary Immersion
Ingress of water in quantities causing harmful effects shall not be possible when the laptop is temporarily immersed in water (up to 1m deep for up to thirty minutes).
8 - Continuous Immersion
Ingress of water in quantities causing harmful effects shall not be possible when the laptop is continuously immersed in water under conditions which shall be agreed between manufacturer and user but which are more severe than for numeral 7
Additional Information
Degree of protection against access to hazardous parts
This may be optionally specified by a letter:
- A - Protected against access with the back of the hand
- B - Protected against access with a finger
- C - Protected against access with a tool
- D - Protected against access with a wire
Supplementary Letters
- H - High voltage apparatus
- M - Tested for ingress effects when movable parts of the device are under motion
- S - Tested for ingress effects when movable parts of the device are stationary
- W - Suitable for use under specified weather conditions, and provided with additional protection.