OLPC Firmware q7b11: Difference between revisions

Revision as of 05:15, 8 January 2013

NOTE: The contents of this page are not set in stone, and are subject to change!

This page is a draft in active flux ...
Please leave suggestions on the talk page.

This page is monitored by the OLPC team.

Works on XO-4 B1 and C1 only. Do not use on XO-4 A or other models.

new embedded controller firmware EC 0.3.08,
touchscreen, change firmware to version 0.0.0.10, breaks automatic upgrade, you must this once

ok update-nn-flash

@@ Line 7: / Line 7: @@
 Works on XO-4 B1 and C1 only.  Do not use on XO-4 A or other models.
-* new [[EC_4.0_Firmware|EC 0.3.08]],
+* new embedded controller firmware [[EC_4.0_Firmware|EC 0.3.08]],
-* touchscreen, change to version 0.0.0.10, breaks automatic upgrade, you must this once
+* touchscreen, change firmware to version 0.0.0.10, breaks automatic upgrade, you must this once
  ok update-nn-flash
@@ Line 18: / Line 18: @@
 |-
 | Build date time <!-- .built -->
-| 2013-01-02 16:39:44
+| 2013-01-07 22:12:15
 |-
 | Source revision <!-- more rom:sourceurl -->
@@ Line 24: / Line 24: @@
 |-
 | EC version <!-- banner -->
-| [[EC_4.0_Firmware|EC 0.3.07]]
+| [[EC_4.0_Firmware|EC 0.3.08]]
 |-
 | CForth version <!-- (see startup banner on serial port) -->
-| [http://dev.laptop.org/git/users/wmb/cforth/commit/?id=bbdf8572 bbdf8572]
+| [http://dev.laptop.org/git/users/wmb/cforth/commit/?id=7b9cfcf1 7b9cfcf1]
 |-
 | WLAN 8686 version <!-- from wlan-version.fth -->
@@ Line 43: / Line 43: @@
 === CForth ===
+* disable pull-up on TOUCH_HD# signal from touchscreen controller and IR PCB,
-* none
 === EC ===
+* see [[EC_4.0_Firmware|EC 0.3.08]]
-* some
-=== WLAN ===
+=== Touchscreen ===
+* reverse polarity of the ''host disable'' signal,
-* none