XS Community Edition/0.3/Testing: Difference between revisions

From OLPC
Jump to navigation Jump to search
Line 2: Line 2:
===Installing===
===Installing===


Use only the instructions in the [[User:Holt/XS_Community_Edition/0.3/Installing | page]] and a fresh OLPC-OS 13.1.0 or Fedora 18 install.
Use only the instructions in the [[User:Holt/XS_Community_Edition/0.3/Installing | installing page]] and a fresh OLPC-OS 13.1.0 or Fedora 18 install.


Repeat all below on XO-1.75 and "big iron" generic/commodity x86.
Repeat all below on XO-1.75 and "big iron" generic/commodity x86.

Revision as of 22:08, 9 May 2013

XSCE Smoke Test

Installing

Use only the instructions in the installing page and a fresh OLPC-OS 13.1.0 or Fedora 18 install.

Repeat all below on XO-1.75 and "big iron" generic/commodity x86.

External SD Card

Mount should report /dev/mmcblk0p1 on /library

External USB Drive

???

Dynamic Host Configuration Protocol (dhcpd)

Connect an XO to the XSCE's AP. The XO will get an IP in the 172.18.x.x range.

Network Address Translation/NAT (iptables)

???

Internet Domain Name Server (named)

???

Registration (idmgr)

Register the XSCE (yes, you're actually registering it to itself). You should get a message informing you that registration was successful. Registration also creates a directory named the XO's serial number in /library/users.

XMPP Server (ejabberd)

Now that a client XO is connected to the XSCE, register it. If you get a message that registration failed, go to the Sugar Control Panel and in Network, clear out the collaboration server field. Upon successful registration, both XOs will appear in Network Neighborhood. To verify that ejabberd is managing collaboration and not the LAN, issue this in a root terminal:

ejabberdctl connected-users.

Ejabberd Web Interface

This isn't necessary for testing, but is fun to poke around in:

Register the admin user: ejabberdctl register admin schoolserver.local <password>

In a browser, go to http://schoolserver.local:5280/admin

The username is admin@schoolserver.local and the password is whatever you set above.

Apache Web Server (httpd)

Go to http://schoolserver and http://schoolserver.local. Both should resolve to the Apache test page.

Proxy Caching and Internet Access (squid)

Check the initial size of the squid cache directory: du -sh /library/cache. From the client XO's Browse Activity, surf the internet. Check the cache directory size again and it should be larger.

OLPC-update (rsync)

???

Activity Server (uses httpd)

If http://schoolserver/upload_activity.php resolves, the Activity Server is working.

To upload an Activity to the school server, use a browser to navigate to http://schoolserver.local/upload_activity.php. Click on "Choose File", and use the file chooser to indicate which Activity you would like to upload.

Virtual Private Network (openvpn) [FOR EXPERIMENTATION]

????

1-N WebDEV(JerryV, GeorgeH)

???

Service: Statistics Collection

???

Book server(pathagar)

???

Internet in Box

???