Release notes/8.2.0: Difference between revisions

From OLPC
Jump to navigation Jump to search
No edit summary
 
(371 intermediate revisions by 47 users not shown)
Line 1: Line 1:
{{Draft}}
{{outdated}}
{{OLPC}}
{{OLPC}}
{{Release Notes}}
{{Release Notes}}
Line 5: Line 5:
{{TOCright}}
{{TOCright}}


''Our apologies, but if you are using Browse in version 10.1.1 on XO-1.5 you may have been directed to this page by [http://dev.laptop.org/ticket/10243 mistake]. If so, please go to the [[Release_notes/10.1.1|10.1.1 release notes]]. The rest of this page relates to version 8.2.0.''
= Before you update to this release=

Before you update to this release, please:
== Before you update to this release==
* If you are in a school or other deployment, make sure you contact your technical support team before updating. Some deployments have special configurations which will need special steps taken before update. Your deployment may not yet support this release.
* If you are in a school or other deployment, make sure you contact your technical support team before updating. Some deployments have special configurations which will need special steps taken before update. Your deployment may not yet support this release.
* Determine which release you are on and whether you plan to update over the Internet or via USB stick. The available [[#Upgrading_from_previous_releases|upgrade options]] are listed below.
* Determine the version of your activities. Decide if you need to re-install or update them and make sure you have access to updated versions if required. See the list of [[#Activity incompatibilities|activities you must update]].


== New features in 8.2.0 ==
Full instructions are are in the [[#Upgrading from previous releases|upgrading from previous releases]] section of this document.

There is a new Help Activity in this release that includes a full manual on the laptop. Look for the icon of a Question Mark.


= New features in 8.2.0 =
In addition to fixing bugs, we've added lots of new features to our 8.2 release, including
In addition to fixing bugs, we've added lots of new features to our 8.2 release, including
* [[#GUI and usability improvements|GUI and usability improvements]]
* [[Feature_GUI and usability improvements|GUI and usability improvements]]
* [[Automatic software updates]]
* [[#Activity updater|Activity update]]
* [[#Backup and restore|Backup and restore]] from a school server
* [[Feature_Backup and restore to school server|Backup and restore]] to school server
* [[#Longer battery life|Longer battery life]]
* [[Feature_Longer battery life|Longer battery life]]
* [[Feature_Keyboards and Languages_8.2|New Keyboards and Languages]]
* [[#Improved cursor control|Improved cursor control]]
* [[#Collaboration improvements|Collaboration improvements]]
* [[#More keyboards|Support for more keyboards]]
* An update to [[#Fedora 9|Fedora 9]] for our base system
* [[#Activity improvements|Improvements to activities]].


The new XO manual for release 8.2.0 is available [http://www.laptop.org/manual/ here.]
== GUI and usability improvements ==
A number of aspects of the Sugar UI have been revamped to improve the user experience.


== Upgrading from previous releases ==
===Home view===
We've made a number of improvements to the home view to make it easier to manage and launch activities.


For technical details and other upgrade options see [[olpc-update]] and [[Clean-install procedure]]. If you run into trouble, see [[Upgrade troubleshooting]], [[Support FAQ]] and [[Support]] to email our tech support volunteers.
There are now three distinct view options:


=== If your XO is connected to the internet ===
<gallery align='right'>
Image:Home Freeform View8.2.png|'''Home Freeform view'''
Image:Home Ring View8.2.png|'''Home Ring view'''
Image:Home List View8.2.png|'''Home List view'''
</gallery>


'''Note that this process may make some of your Activities and the Journal items that depend on them not work - make sure you have backed up any files you want to save!'''
;Freeform
This view shows only favorite activities. The activity icons can be positioned by dragging them around the screen.
;Ring
This view shows only favorite activities. The activities are kept neatly ordered within a ring surrounding the XO.
;List
This view shows every activity currently installed on the laptop, as well as other info about them such as their installation date and version number. The search field allows children to easily locate an activity in the list. Favorite activities can be specified here by starring them.
;Create your own...
Tech-savvy users can now create their own activity layouts! See [http://dev.laptop.org/git?p=users/cscott/sugar;a=summary Scott's example layouts].


This process can take more than 30 minutes, much longer if you have a slow internet connection.
====Launching activities====

In the new design, the Home view serves as a space for launching new activities. By contrast, the Frame now contains the running activities which used to appear in Home. This change solidifies the zoom levels as places for initiating new objects and interactions. Clicking on an activity icon will launch it, revealing a brand new launching behavior which provides strong and immediate feedback, with the familiar pulsing icon in the center. This feedback discourages children from launching many activities at once. (They can leave the launcher via the zoom buttons/keys to start others, if they wish.)

====Removing activities====

[[Image:Removing Activities8.2.0.png|thumb|right|Activities can be individually erased to free up space for new Activity course material]]
By hovering over the activity icon it's possible to take other actions as well. For instance, one may easily add or remove it as a favorite activity, or remove the activity completely, uninstalling it permanently. To prevent accidental deletion, a confirmation step is required when deleting activities.

=== Frame ===
The new frame provides more useful content relevant to the current state of a child's interaction with the laptop. The edges of the frame represent, clockwise from the top: places, people, devices, and objects. Each of these edges provides useful information and interactions, which can be accessed at any time via the frame key or the hot corners.

[[Image:Frame-01.jpeg|thumb|right|The Frame is accessible from anywhere]]

;1. Places
The top edge of the Frame showcases the "places" within the UI a child can navigate to. First and foremost, the zoom level buttons appear here just as they always have. Additionally, the list of currently running activities also appear on the top edge of the frame; the active activity is highlighted. The Journal is always present here as a running activity. Having the active activities in the Frame allows one to easily switch among them with ease, without first returning to Home.
;2. People
The right edge serves as an "active buddy list." People with whom a child is currently collaborating appear on the right edge of the Frame.
;3. Devices
System status is now readily available in the bottom edge of the Frame. The battery level, network status (including the new mesh device, which allows one to switch channels), and speaker all appear here. Their palettes provide more details, and options such as the ability to adjust the volume.
;4. Objects
The left edge of the Frame serves as a multi-item clipboard. Objects such as images and text can be dragged to and from the clipboard and activities, or permanently kept in the child's Journal. The currently selected item (which can be selected with a click) will be pasted when the paste button (or shortcut) is invoked within an activity.

=== Journal ===

The 8.2 release includes an updated Journal as well. The changes are subtle, but the look is cleaner and some additional features have been added to make object management easier.

====List view====

The list view looks a bit different, but hasn't changed too much from how it behaved before. It still contains a list of all of the objects created on the laptop, ordered by date. Resuming an activity is as simple as clicking on the activity icon itself. There are a few enhancements to the Journal list as well:

;In-line renaming
It's now possible to rename entries directly within the list view, by clicking on the title text. A text field will appear to receive changes, which can be confirmed or canceled with enter and esc, respectively.
;Object palettes
The objects represented within the entries (specifically, activity and people icons) now have palettes attached to them. By hovering over their icons, it's possible to find out more information about them, such as the name of the person, and take actions on them, such as copying or deleting an entry. These changes make it possible to do more from the list, without having to constantly enter the detail view.
;Better feedback
The Journal now provides better feedback in edge cases, for instance when there are no search results returned for a query, to prevent confusion.

====Getting more details====

By clicking on the details button (the little arrow) at the right of an entry, a child can view the details page for the entry. This includes a preview, editable description and tags, and other info about the entry. The toolbar at the top of the screen provides useful actions for launching, copying, or deleting the entry.

=== Graphical sugar control panel ===
Accessible from the pop-up menu of the XO icon in the [[home view]], the control panel currently provides a graphical interface for setting language, power, UI, date and other options. More detailed instructions can be found [[Sugar_Control_Panel#The_graphical_user_interface| here]].

<gallery>
Image:Sugar_Control_Panel.png|'''Sugar Control Panel''' <br> Graphical interface for setting many XO preferences.
Image:Sugar_Control_Panel_Language.png|'''Language''' <br> Allows selection of the default language.
Image:Sugar_Control_Panel_Power.png|'''Power''' <br> Enables power saving modes. See Improved Power Management section below for more details.
Image:Sugar_Control_Panel_Frame.png|'''Frame''' <br> Sets the time it takes the Frame to appear when the cursor is on the corner or on the edge (side) of the screen.
Image:Sugar_Control_Panel_About_my_XO.png|'''About my XO''' <br> Shows the build number, firmware version and serial number.
Image:Sugar Control Panel Software Updates.png|'''Software Updates'''<br> Checks for latest version of activities and optionally upgrades them
Image:Sugar_Control_Panel_Date_and_Time.png|'''Date & Time''' <br> Allows setting of the Timezone. Note: this function no longer needs Super User access.
Image:Sugar_Control_Panel_About_Me.png|'''About Me''' <br> Sets the name and color of your XO icon. These values are seen by other XOs when using collaboration.
Image:Sugar Control Panel Network.png|'''Network''' <br> Allows turning off the wireless radio and identifies a school server for collaboration
</gallery>

== Activity updater ==
This release introduces an automatic updater to help you get the latest Activities. Activities are maintained separately from the core OS, and the updater will help ensure your Activities work well with your new 8.2 core OS. (It is especially important to update your Activities after upgrading from 7.1-series (650, 653, and 656) builds, since otherwise you will see no activities after boot.)

Ensure you are connected to a network, then use the Sugar Control Panel (described above) and click on 'Software Updates' to check for updates to your activities. Select the updates you are interested in (right click to select/unselect all) and click 'Install now'.

You can also subscribe to different "Activity Groups" with interesting collections of activities, by clicking on the "Edit Activity Groups" expander in the control panel. The [[activity groups]] page on our wiki lists some interesting activity groups you can try.

For activity authors and developers, technical details can be found at the [[Software update]] page on our wiki.

== Backup and restore to school server ==
This feature will automatically backup an XO at least once a day to its registered school server.

To restore a previous backup from the XO, open the Browse activity, click on "Schoolserver", and choose the backup date to which you wish to restore. This is meant for disaster recovery only: all user data will be replaced.

*<trac>7392</trac> Disaster-recovery backup+restore w/ XS
*[[Ds-backup]]
*[[XS_Blueprints:Datastore_Simple_Backup_and_Restore#Test_plans_and_user_walkthrough]]

== Longer battery life ==
This feature is implemented via the Sugar Control Panel. It is off by default so you must enable it in the Sugar Control Panel (click on the 'Power' module) to take advantage of it.

The feature offers two options:
* Automatic power management
This mode dims the screen and turns off the CPU when it switches the laptop to power saving mode. Power saving mode comes on automatically when the user does not interact with the touchpad or keyboard for more than a minute and when no activities are heavily using the CPU on the XO. For example, power saving mode would not be turned on if the video camera is recording or showing video on the screen, regardless of whether the user touches the keyboard or not. The laptop will wake up when a key (or the power button) is pressed or the touchpad is used.

* Extreme power management
This mode turns off the wireless radio. Once this mode is turned on the XO wireless network connection will disconnect. This is the most aggressive power saving mode available when combined with Automatic Power Management, and will give the longest battery life.

A third sleep mode is entered when the lid is closed or the power button is pressed momentarily (holding the power button for more than a few seconds will turn off the laptop completely). This mode differs from the automatic mode in that keypresses and touchpad usage will not wake up the laptop -- to leave this mode, open the lid or press the power button again. The "Extreme power management" mode will still control whether the wireless radio remains on or not when suspend is invoked manually.

Details on the software implementation at <trac>7384</trac>


== Improved cursor control ==
'''TODO''': rewrite or remove this section.

It is better but if you still experience problems where the cursor moves unexpectedly, the touchpad may be trying to recalibrate. It cannot recalibrate accurately while you are touching it. So taking your finger off the touchpad for 10 seconds may help solve problems of unexpected cursor movement.

== Collaboration improvements ==
'''TODO''': rewrite or remove this section.

<s><trac>7387</trac> Server-based Collaboration Scalability Improvements (Gadget)</s>
:This didn't make the feature freeze and is still being developed. Perhaps release 9.1...--[[User:Morgs|morgs]] 14:03, 17 July 2008 (UTC)
<trac>7389</trac> Collaboration and Presence Bug fixing
:There are newer versions of the telepathies in, but we don't have a specific list of fixes yet. Perhaps the changelogs for telepathy-gabble and telepathy-salut will help. --[[User:Morgs|morgs]] 14:07, 17 July 2008 (UTC)
<trac>7390</trac> Alternate Collaboration Technology (Cerebro)
:This is in the build, but isn't integrated so existing activities can't use it. So its main benefit right now is network testing. --[[User:Morgs|morgs]] 14:07, 17 July 2008 (UTC)
:Note -- this feature '''is not stable'''. It's API '''will''' change. However, you can probably use it to build collaborative activities that are much faster and more reliable than with other mechanisms, so we think it's worth playing with.

== Languages and keyboards ==

Thanks to members of the worldwide [https://dev.laptop.org/translate/ OLPC Translation Project], who can be found on the [http://lists.laptop.org/listinfo/localization localization mailing list], we have the more than 80% of the Sugar interface translated into the following languages:

* Dutch
* French
* German
* Greek
* Italian
* Japanese
* Kinyarwanda
* Kreyol
* Marathi
* Mongolian
* Nepali
* Sinhala
* Spanish
* Telugu
* Turkish
* Urdu
* English

Moreover, a number of languages have more than half of the user interface strings translated. Please note that these translations are not officially supported by OLPC. If you want to get involved in the volunteer driven translation efforts, visit the [https://dev.laptop.org/translate/ OLPC Translation Project]

Keyboards supported in this release include:
* Spanish, [[OLPC_Argentina_Keyboard]]
* Portuguese, [[OLPC_Brasil_Keyboard]]
* Amharic, [[OLPC_Ethiopia_Keyboard]]
* Arabic, [[OLPC_Libya_Keyboard]]
* Thai, [[OLPC_Thailand_Keyboard]]
* Urdu, [[Urdu_Keyboard]]
* Cyrillic, [[Cyrillic_Keyboard]]
* Turkish, [[OLPC_Turkey_Keyboard]]
* Mongolian, [[OLPC_Mongolian_Keyboard]]
* Devanagari, [[Devanagari_Keyboard]]
* Dari, [[Dari_Keyboard]]
* Khmer, [[Khmer_Keyboard]]
* Italian, [[Italian_Keyboard]]
* French-Canadian, [[French_Canadian]]
* English, [[OLPC_English_Keyboard]]

== Fedora 9 ==
We've upgraded our base system to the [http://docs.fedoraproject.org/release-notes/f9/ Fedora 9] release from our partner, [http://redhat.com Red Hat]. The [http://docs.fedoraproject.org/release-notes/f9/ release notes] for Fedora 9 describe some of the improvements we've inherited, although builds for the XO do not include all the features of Fedora 9 by default.

More information: <trac>7383</trac>

=== Improved Flash compatibility ===

OLPC ships [http://www.gnu.org/software/gnash/ Gnash], an open source flash movie player integrated into the Browse activity. This release updates Gnash to version 0.8.3.

The newer version of Gnash increases compatibility with many sites. For example, [http://www.pbskids.com/caillou Caillou] animation rendering was incorrect in previous releases, but now appears to work correctly.
: As of build 2301, the Caillou flash animation is mostly not working. I browsed to http://pbskids.org/caillou/immersivegames and it says "errorCode::Failed to load movie or jpeg". [[User:Jpritikin|Jpritikin]] 04:03, 22 August 2008 (UTC)

=== Recent Software ===

Fedora provides many exciting programs including office software, artistic/creative software, development tools, games, and more. Fedora 9 provides ''recent versions'' of this software which can be installed or removed with [[yum]].

== Improvements to activities ==

Activities start faster than in previous builds.

<trac>7382</trac> Browser Improvements
Auto-complete now available!

<trac>6036</trac> Chat enhancement

= Upgrading from previous releases =

Be sure to read and carefully follow these instructions before you begin the upgrade process, and allocate enough time to do the full process before you begin.

'''During pre-release development, you will need a [[developer key]] in order to install an 8.2 [[OS Images|OS image]]. This key should be copied in the /security directory BEFORE the upgrading process.'''

'''Important Note: Please check with your deployment technical contacts before upgrading. Countries using the XO may have custom configurations which may require special actions to be taken before new releases can be installed.'''

The process described below is to upgrade the XO while it is connected to Internet, for other ways to upgrade, see the [[Upgrading_the_XO#Overview_of_Upgrading_Options | Upgrading the XO]].

Here are the steps to upgrade:
# Plug the XO into AC Power
# Connect XO to the internet
# Launch the update command
# Update activities

== Step 1: Plug the XO into AC Power ==
Upgrading could be a long process. For this reason, ensure first that your XO is connected to reliable AC Power. Be sure to have enough time to do the full process (about 1 hour).

== Step 2: Connect XO to the internet ==
During the upgrade process, your XO will download the new release. So you should ensure that the XO is connected to the internet before launching the upgrade. See [http://laptop.org/laptop/start/connecting.shtml Connecting Guide] or [[Wifi Connectivity]] for instructions. Use Browse activity to test your connection.

== Step 3: Launch the update command ==
Open the '''[[Terminal Activity]]''' [[Image:Activity-terminal.svg|35px]] or a console and type the following (press the Enter key after it):

sudo olpc-update ''{{:Friends in testing/current image}}'' <!-- reboot, verbose -->

If the update program successfully connects to the update server, some messages should display similar to this:


# Make sure your XO is plugged in, turned on, and [http://laptop.org/manual/XO_GiveMeTheInternet.html connected to the Internet] (you should be able to load http://laptop.org in the Browse Activity). If your XO is not connected to the internet, you will not be able to use this upgrade method.
# Open the Terminal Activity. [[Image:Activity-terminal.svg]] You can find it by going to the home view (press the 5th symbol from the left, top row), clicking on the little arrow at the bottom right of the screen, and then on the symbol that looks like this one.
# In the Terminal Activity, type <code>su -</code> (lowercase letter 's', lowercase letter 'u', a space, and a hyphen). Press Enter.
# At the <code>"-bash-3.2#"</code> prompt type <code>olpc-update 767</code>. Press Enter.
# You should see text that looks something like this (sometimes, in addition to the text below, you might get a message about irsync_pristine failing, and that "irsync_dirty" is being tried, this is normal):
<pre>
Downloading contents of build ''{{:Friends in testing/current image}}''
Downloading contents of build ''{{:Friends in testing/current image}}''
Updating to version hash ''xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx''
Updating to version hash ''xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx''
Line 255: Line 45:
- Cleaning tree.
- Cleaning tree.
- Fetching contents.
- Fetching contents.
- Performing incremental rsync.
- Performing incremental rsync. [Comment: Wait a long time! Could be over an hour depending on your internet connection speed.]
Verifying update.
Verifying update.
Installing update in /versions/{pristine,run}/''xxxx''
Installing update in /versions/{pristine,run}/''xxxx''
</pre>
6. At the end of the upgrade, you will either see the words "Installing update in...." or "Update Succeeded!" on the screen. If you see the words "I don't think you're connected to the internet." see the notes below. <br>
<br>
7. Wait for the prompt <code>"-bash-3.2#"</code> and type <code>reboot</code> then press Enter to restart your XO. You will probably hear the little XO tune 2 times, then it will say erasing and a countdown will appear. Finally it will reboot again, you will hear the tune for a third time. Now you are ready to go to step 8.<br>
<br>
8. After your XO reboots, the last step is to download the new versions of Activities. When the XO boots you will see a bar toward the top of the screen that says "Software Update" and the options being "Cancel", "Later" and "Check now". Before you choose "Check now" to update the activities, you must reconnect your XO to the internet. You may see the sign-in box appear in home view. If it does, and it lists your router, you can do it from there. If it doesn't appear or offers the wrong connection, go to the Neighborhood view and connect from there. Then go back to Home view and then click "Check now" (it's ok to leave the home view because when you go back the options should still be there). First the XO will check for any updates and then it asks if you'd like to install them. Click "Install selected" to install your newest versions of your activities. <br>


Congratulations, you've upgraded!
This process may take more than thirty minutes. When the process is complete, you need to [[reboot]].

'''Important Note: On the first reboot after upgrading, the XO will run slowly for about 1 minute. After that it will run normally.''' <trac>7356</trac>

== Step 4: Update activities ==

After you reboot the first time, sugar should notify you that your activities should be updated. Your activity update process will differ depending on whether or not you have network access.

[[Image:820_firstactivityinstall.png|thumb|G1G1 Activity install]]
[[Image:820 updateproposal.png|thumb|Activities update proposal]]

=== With the XO connected to the internet ===

First, '''connect to the internet''', and then either click the "Check now" icon in the update notification dialog, or, if you've dismissed the dialog, open the sugar control panel and click the "Software update" module.

You should see a progress bar as your XO looks for the appropriate updated versions of the activities you have installed. When it is done, click "Install selected" to update your activities. You'll see another progress bar, as the activities are updated.

Some activities may not successfully update, either because the new version of the activity is improperly packaged or due to transient network errors. If this is the case, some activities will remain in the "available updates" list after the installation process has completed. If a network error was the cause, you may wish to immediately retry the installation; otherwise, you probably need to wait until the activity author uploads a corrected version of their bundle.

=== Without the XO connected to the internet ===
If you do not have a connection to the internet:

:1. Download the [[G1G1 Activity Pack]] (from [http://wiki.laptop.org/images/6/62/G1G1_Activity_Pack_1.zip here]) and unzip it in the base (root) directory of a BLANK USB flash drive. You should see two directories (boot and bundles), and a file called customization-2 in the base directory. <br>
/boot
/bundles
customization-2
:2. Insert the USB flash drive and [[reboot]] the XO. It will display text on a black screen as the activities are installed, after which it will power off.<br>
:3. Remove the USB flash drive.

'''Notes'''
* The USB flash drive should be formatted with a VFAT file system (FAT16 with long filename support); this is the common format for most USB sticks with capacity up to 2 GB.
** It is important that the USB flash drive have a partition table, and that the VFAT file system be in the first partition. Linux allows you to put a file system directly on the drive itself without a partition table (i.e. "mkfs.vfat /dev/sdi", rather than fdisk and "mkfs.vfat /dev/sdi1"), but then on boot, the XO will panic with an error from mount ("non-zero status code 255").
* You can perform steps 1 and 2 on another computer, or if you are familiar with the Linux command line, on the XO in a [[Terminal Activity|terminal]] using <tt>wget</tt> and <tt>unzip</tt>.
* Commands such as "extract here" in ubuntu / windows will sometimes create a directory with the same name as the zip file, placing the unzipped files within it. If this happens, you will have to move the files to the base directory in order for your XO to see them on boot.
* The "boot" directory will contain two zip files, actos.zip and runos.zip. This is normal; these files SHOULD NOT be unzipped.
* Warning: the USB flash drive should be empty before this operation to contain ONLY the G1G1 Activity Pack files at end.
* If your machine is not a secure XO (its firmware is unlocked), you must boot in secure mode. If you have a developer key on a removable media like an SD card or a USB key, remove the media. If the developer key is on the NAND FLASH or the machine is permanently unlocked, hold the X game key while booting.

In addition to the [[G1G1 activity pack]], some commonly installed alternative activity packs include the:
* [[Peru activity pack]]
* [[Nepal:_Testing%2C_QA%2C_and_Configuration#Nepal_Activity_Pack|Nepal activity pack]]
* [[:Category:Activity Pack|...more activity packs]]

(The Nepal activity pack contains some [[Nepal_Customization_702|additional customizations]] made by [[OLE Nepal]] for their pilot).

To install these packs, use the same process that you just used to install the [[G1G1 activity pack]].

= Activity incompatibilities =
Some activities need update to work correctly on 8.2.0. The following activities are known to be incompatible:

* Browse-91 (and older versions) will fail to download files and install .xo/.xol bundles. Upgrade to Browse-92 or later. <br>
<trac>8242</trac> browse unneeded error.

* Implode-3 (and older versions) will fail to launch, upgrade to Implode-4.
* Measure 17
* Pippy-21 (and older versions) will fail to launch, upgrade to Pippy-22.
* PlayGo
* Record-54 (and older versions) will fail to take photos and record videos, upgrade to Record-55.
* TamTam bugs <trac>6673</trac>, <trac>7466</trac>
* <trac>7997</trac> re: TuxPaint
* MaMaMedia Creative Center 8047

The [[#Activity updater|"Software update"]] control panel will update some of these if you have internet access.

Test results from Wellington, NZ <br>
http://lists.laptop.org/pipermail/devel/2008-September/018879.html

= Resolved Bugs In This Release =
http://dev.laptop.org/report/22

<trac>7532</trac> allow activity bundles install from USB (still awaiting QA confirmation)

<trac>5987</trac> flash plays better (e.g. pbskids.org

<trac>6014</trac> better but not complete. We recommend closing activities before shutting down.

<trac>4208</trac> battery indicator works better

synch with browse section: <br>
<trac>5156</trac> google calendar works.

<trac>5613</trac> - important for localization (check if its regression)

= Notable Open Bugs In This Release =

All known open bugs (defects) in this release are [http://dev.laptop.org/query?status=assigned&status=new&status=reopened&order=priority&col=id&col=summary&col=status&col=type&col=priority&col=milestone&col=component&type=defect here]

It is recommended to restart your XO at least once every 24 hours. If you leave your XO running for 24 hours continuously it may become unstable.

This is an open bug tracking system so anyone can enter bugs. Therefore, please use caution when interpreting the content of this list. If you have a question about the validity or status of any known bug you can e-mail the owner or send a note to devel@lists.laptop.org

* <trac>6253</trac> document workaround.
* <trac>6388</trac> don't put USB and SD card at the same time. It must be one or the other.
* <trac>6467</trac> mesh view takes a while to fill in after suspend.
* <trac>6944</trac> icon color off in some edge cases with APs
* <trac>7537</trac> olpc-configure marks all of /home/olpc as read/exec
* <trac>7158</trac> Upgrade from 656 to 703 leaves [[su]] unusable when you fallback to 656.
* <trac>7509</trac>journal fails to mount specific usb drive
* <trac>7511</trac>Transferring video files between laptops saturates bandwidth and kills running session
* <trac>7513</trac>Sharing is limited in time. Cannot share overnight
* <trac>7531</trac>shutdown sometimes appears to hang - need ctl-alt-F2 for it to complete
* <trac>7533</trac> clipboard issues are know. Only things tested in smoke test will work.(edit)
* <trac>7622</trac> Control Panel's 'Software update' module does not preserve an Activities Home view favourite state
* <trac>7627</trac>Palette can be partially drawn off screen when using right click for quick display
* <trac>7642</trac>Switching to mesh/neighborhood view should hide control panel.
* <trac>7649</trac>Activities needs to access sugar-toolbox's members directly
* <trac>7713</trac>Inconsitent behavior for activity installation
* <trac>7726</trac> Activities being installed (unziped) hog the CPU, temporarily freezing Sugar
* <trac>7733</trac> Cannot install Wikipedia-10.xo
* <trac>7742</trac> don't double click on activities
* <trac>7754</trac> Opening more than one instance of Browse blocks both
* <trac>7775</trac> Network icon not refreshed after first connect in neighborhood view (joyride-2230)
* <trac>7785</trac> unreliable ethernet connection
* <trac>7426</trac> Journal in f7 disappears after olpc-update to f9
* <trac>7812</trac> work around is holding down the power button.
* <trac>7825</trac> Some WPA APs will not work due to this bug. Only the ones we have tested should work properly. They include ...
* <trac>7870</trac> need to use new network reset GUI 7480 to work around this and other network issues
* <trac>7873</trac> and 7874 should be noted unless fixed
* <trac>7877</trac> Control Panel / Data & Time: Selecting timezone by typing locks up UI
* <trac>7876</trac> Don't double click on activities to launch them!
* <trac>7888</trac> (note to self, also check sharing page to make sure it says Paint doesn't share)
* <trac>7890</trac> Cannot close Paint sessions after attempting to Join
* <trac>7990</trac> sugar-control-panel - blocks frame operation?
* <trac>7993</trac> Journal unmount broken - dataloss n vfat
* <trac>8011</trac> software update does not remedy lost Activities/Analyze.activity
* <trac>8021</trac> blogger.com start page raises dramatically X cpu usage
* <trac>7922</trac> hang on suspend when USB-ethernet is connected
* <trac>8088</trac> Some kingston usb keys aren't mounted by the initramfs and can't be used to distribute activation leases
* <trac>8099</trac> ext3 formatted usb mounted but not visible in journal
* <trac>8111</trac> ctr-alt-del doesn't work from term
* <trac>8117</trac> LidClose suspend is inhibited by a prior PowerButton resume.
* <trac>8121</trac> There is a point when launching new activities fills up mem, makes system crawl to a freeze, and only solution is to power down
* <trac>8132</trac> New wireless firmware version incorrect with ethtool -i eth0
* <trac>8160</trac> Write activity stops sharing and hides users from neighborhood
* <trac>8161</trac> The Check icon next to "Connect" suggests you can connect to mesh/wireless using the check game button
* <trac>8168</trac> cloaked WPA network appears, then disappears after connection attempt
* <trac>8181</trac> Save to journal now called Keep.
* <trac>8183</trac> No non-English languages in Qemu installs
* <trac>8189</trac> Maximum # of XOs in a mesh is 10
* <trac>8200</trac> confusing message in journal on some queries
* <trac>8220</trac> Don't show frame when using log viewer
* <trac>8225</trac> reboot every day or so.
* <trac>8235</trac> meshview loses data on screen rotate.
* <trac>8254</trac> libX11 & libX11-devel dependency issues
* <trac>8287</trac> Copy-to-clipboard broken in Journal
* <trac>8301</trac> Fast suspend/resume cycle causes a libertas crash
* <trac>8320</trac> not view source w/browse
* <trac>8314</trac> browse of big pages crashes



'''Note:'''
clipboard not consistent (add details and bug ids)
* When upgrading from build 703 or 708 you will not see the Library (links to science, books, etc links on the left side) in the Browse home page. You can re-install the Library as follows:
** Open the Control Panel and go into Software update.
** After it checks for updates, go to <code>"Modify activity groups"</code> and click on the triangle.
** Beside <code>"Group URL"</code> type: <code> http://wiki.laptop.org/go/Activities/G1G1 </code> and click the <code>"Add"</code> button.
** Click <code>"Refresh"</code> and allow the XO to upload the new updates.
** Click on Install selected. Once it completes, reboot.
* If you can browse the Internet (see step 1 above) but the <tt>olpc-update</tt> command returns the error <code>"I don't think you're connected to the internet."</code>, you may need to open TCP port 873 (rsync) on your firewall for the outbound connection.


== Activity Issues ==
=== Offline upgrade ===
[[Image:YamaDone.JPG|thumb|''for new users'' [[USB_upgrade|<br>'''illustrated guide to upgrading using a USB stick<br>''']]]]
* <trac>6773</trac> TamTamJam: Recorded microphone slots don't playback. ?need to test
You can use another computer that is connected to the internet (a desktop at home, a computer lab, etc.) plus a USB storage device (such as a compatible [[USB_drive#USB_drives_and_firmware|USB flash drive]]) to upgrade your XO.
* Couldn't add feeds to news reader because clicking "+"/dropdown on the feeds tab didn't do anything. ?need to test
The way it works is on your non-XO computer you download two files containing the upgrade data, saving them to the USB flash drive; then you insert the USB flash drive into your XO and trigger its upgrade process.
* <trac>6684</trac> <trac>6736</trac> <trac>7017</trac> <trac>6537</trac> <trac>6774</trac> [[Read]] will not reliably share a PDF document.
'''Note that this process will COMPLETELY erase ALL files on your XO! Make sure you have backed up any files you want to save!'''
* <trac>6729</trac> Read doesn't save the PDFs it opens (when sharing)
* <trac>6223</trac> <trac>7166</trac> Read only works well as a PDF viewer. You can start other file formats in Read from the Journal but may have problems.
* <trac>1997</trac> Flashing upon selection in Write activity
* <trac>2008</trac> Rollover should appear at cursor in canvas views
* <trac>2169</trac> Canvas in Write doesn't extend to edges of screen
* <trac>7498</trac> if you have multiple Browse instances open, Browse dialogs appear in the wrong instance window
* <trac>8079</trac> browse video playing issue
* <trac>8097</trac> don't alt-esc from browse
* <trac>8112</trac> Chat invite doesn't do anything
* <trac>8113</trac> Acoustic measure doesn't allow 3rd person.
* <trac>8228</trac> no sharing with paint.
* <trac>8279</trac> Mime types not assigned right


Plug an empty formatted USB flash drive into the computer that is connected to the internet.
== Network-related issues ==
Then, right-click (Ctrl-click for Mac) on each of the two URLs below and choose "Save Target As" ("Save Link As" for Firefox). Save both files to the USB flash drive. Do not open the files.


* http://download.laptop.org/xo-1/custom/g1g1/gg-767-4/fs.zip (This file contains only instructions for the firmware to update with the following file.)
<trac>6448</trac> must use mesh or AP but not both.
* http://download.laptop.org/xo-1/custom/g1g1/gg-767-4/gg-767-4.img (This file contains the Sugar platform with the G1G1 2008 set of Activities.)


The first file is about 297 KB, and the second file is quite large (about 450 MB), so they might take a while [15 - 20 min.] to download. When the download is complete, Eject/Remove the USB flash drive, and unplug it. After you have finished this step, there should be two files on the USB flash drive, the <tt>fs.zip file</tt>, and the <tt>.img</tt> file. The MD5 checksum for fs.zip is 1bb452e77b7390e00bdd7fdcc7cbc793 The MD5 checksum for gg-767-4.img is 3f281dda352d32320879728377b32476
There are many open mesh and collaboration bugs.
Work is being done in that area in this release but it is not confirmed yet.


Now, follow the steps below to complete your installation:
After downloading a PDF, you can choose "Show in Journal" or "OK". To open the PDF in the Read activity, choose "Show in Journal" then click on the item in the Journal and it will open in the Read activity.


# Turn off your XO and connect your USB flash drive to it.
We have identified that the XO is incompatible with certain access points running WPA encryption. The workaround is to use another encryption scheme such as WPA2 (RSN) or WEP. See <trac>7825</trac> for technical diagnosis.
# Make sure your XO is plugged in.
# Hold down all four gamepad keys (on the right side of the screen, above the power button). While still holding the four gamepad keys, push the power button to turn the XO on. Keep holding down the four gamepad keys until the message "Release the game key to continue" appears on the screen.
# Release the gamepad keys. If you see a grid of colored boxes on your screen, congratulations! Your XO is reflashing. It will take about 10 minutes and your XO will automatically reboot when it is done. Your XO may reboot twice, playing the little XO tune.
# After your XO reboots, the last step is to update to the newest versions of Activities. When the XO boots you will see a bar toward the top of the screen that says "Software Update" and the options being "Cancel", "Later" and "Check now". Before you choose "Check now" to update the activities, you must reconnect your XO to the internet. You may see the sign-in box appear in home view. If it does, and it lists your router, you can do it from there. If it doesn't appear or offers the wrong connection, go to the Neighborhood view and connect from there. Then go back to Home view and then click "Check now" (it's ok to leave the home view because when you go back the options should still be there). First the XO will check for any updates and then it asks if you'd like to install them. Click "Install selected" to install the newest versions of your activities. <br>
Congratulations, you've upgraded!
Now, you should be ready to go. Have fun!


(If you chose "Later" on the software update, go to the Sugar Control Panel and select the "Software update" when you are ready to install the updates)
<trac>5501</trac> it takes some time for the link-local presence information to stabilise.


== Resolved bugs in this release ==
When switching an olpc between (mesh) networks, avahi doesn't get the time to announce it is leaving the network. So other XO's aren't immediately informed that someone has switched networks. This means that in XO's that have switched will stay present in the mesh view for some time.
Many bugs were closed in this release. A few important ones include:<br>
<trac>5156</trac> Browse can view Google calendar.


<trac>5613</trac> The XO name can now accept any characters. This is important for languages which do not use the ASCII characters.
= Tips and Tricks =
This is a list of short cuts and tricks for power users of the XO.


<trac>6014</trac> Activities try to save their data when the XO is shut down while an activity is open. This is better but not complete. Users should close their activities before shutting down the XO.
These are not all tested and confirmed working in all circumstances so please use with caution.


<trac>7480</trac> You can reset your network history in the Network control panel in case you need to remove old configurations. However, you will need to re-enter all AP passwords after doing this.
5571 copy to and from datastore (journal) at CLI


For a list of all closed bugs in this release click [http://dev.laptop.org/report/22 here]. <br>
Right click in Browse allows some added capabilities.


== Notable open bugs in this release ==<nowiki><nowiki>Insert non-formatted text here</nowiki></nowiki>
Typing on the keyboard when in home view causes a switch to list view.


For the best experience and maximum reliability with the XO we recommend the following best practices:
Right clicking icons and objects will immediately reveal their secondary palette (<trac>7250</trac>: except on the People, Devices and Clipboard edges of the Frame)


'''For all XOs'''
== New Keyboard Shortcuts ==
* If you open too many activities (generally more than 3) at once you may experience slow response. To close activities, use the frame button (upper right), hover over the open activities, and click on close.
* In general, you do not need to double click on anything in the XO interface. It is designed for a single click. For example, double clicking to launch an activity will cause the XO to launch two instances of the activity which may cause one to fail.
* Drag and drop has limited support in this release. It may work in some cases but it does not work consistently everywhere.
* Power save mode is still in development. In this release it is turned off by default in the control panel. If you use it and experience problems, please turn it off.
* If the XO stops collaborating or stops responding, you can reboot it from the home screen (hover over the XO in the center) or hold down the power button for more than 6 seconds.
* Ensure that you have unmounted a USB stick before removing it. Go to the Journal, hover over the USB stick icon and click on 'unmount'. Another method to remove a USB stick and avoid corruption is to power down the laptop before removing the USB stick..


'''For XOs used in school with many XOs present
Some keyboard shortcuts have changed; the list of all keyboard shortcuts is at: <br>
* Reliable collaboration using the Write activity over mesh or access point networks may not exceed two hours. If there are a lot of XOs or a lot of wireless traffic (e.g. many XOs or many access points) then Write may shut down during collaboration. In this case you may be able to reconnect Write to the collaboration in the Neighborhood view.
[[Keyboard Shortcuts/8.2.0]]
* When collaborating over a Mesh (i.e. XO to XO collaboration with no access point or school server) you should limit the number of XOs on any channel to 10. There are three Mesh channels available (1,6 and 11) and each should have a maximum of 10 XOs. More XOs in a channel may cause instability in the collaboration.


== Screen Grab ==
Alt-1 will capture a screenshot within Sugar; the resulting image will
appear in the Journal.


* Please see the [[Deployment Support]] pages for information on collaboration and connectivity in schools or areas that are densely populated with XOs.
== Cursor Fine Tuning ==
e.g. an explanation of how to tweak cursor interaction at the CLI


''' Click [[OpenBugs_8.2.0|here]] for a more detailed list of open bugs'''
Magnifying glass key


{{Developers}}
Zoom levels.


== API Changes ==


Release 8.2.0 incorporates version 0.82.1 of the Sugar UI.


[[API changes]] documents Sugar and system API changes since release 8.1.x.
[[Category:Builds]]

Latest revision as of 07:36, 6 August 2013

The contents of this page are considered outdated and some of the information may be stale. Please use information here with caution, or update it.
  This page is monitored by the OLPC team.
  For the general public

Our apologies, but if you are using Browse in version 10.1.1 on XO-1.5 you may have been directed to this page by mistake. If so, please go to the 10.1.1 release notes. The rest of this page relates to version 8.2.0.

Before you update to this release

  • If you are in a school or other deployment, make sure you contact your technical support team before updating. Some deployments have special configurations which will need special steps taken before update. Your deployment may not yet support this release.

New features in 8.2.0

There is a new Help Activity in this release that includes a full manual on the laptop. Look for the icon of a Question Mark.

In addition to fixing bugs, we've added lots of new features to our 8.2 release, including

The new XO manual for release 8.2.0 is available here.

Upgrading from previous releases

For technical details and other upgrade options see olpc-update and Clean-install procedure. If you run into trouble, see Upgrade troubleshooting, Support FAQ and Support to email our tech support volunteers.

If your XO is connected to the internet

Note that this process may make some of your Activities and the Journal items that depend on them not work - make sure you have backed up any files you want to save!

This process can take more than 30 minutes, much longer if you have a slow internet connection.

  1. Make sure your XO is plugged in, turned on, and connected to the Internet (you should be able to load http://laptop.org in the Browse Activity). If your XO is not connected to the internet, you will not be able to use this upgrade method.
  2. Open the Terminal Activity. Activity-terminal.svg You can find it by going to the home view (press the 5th symbol from the left, top row), clicking on the little arrow at the bottom right of the screen, and then on the symbol that looks like this one.
  3. In the Terminal Activity, type su - (lowercase letter 's', lowercase letter 'u', a space, and a hyphen). Press Enter.
  4. At the "-bash-3.2#" prompt type olpc-update 767. Press Enter.
  5. You should see text that looks something like this (sometimes, in addition to the text below, you might get a message about irsync_pristine failing, and that "irsync_dirty" is being tried, this is normal):
 Downloading contents of build ''{{:Friends in testing/current image}}''
 Updating to version hash ''xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx''
 Making clean /versions/updates/xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
 Trying irsync_pristine update from rsync://updates.laptop.org/''build-{{:Friends in testing/current image}}''
 - Cleaning tree.
 - Fetching contents.
 - Performing incremental rsync. [Comment: Wait a long time! Could be over an hour depending on your internet connection speed.]
 Verifying update.
 Installing update in /versions/{pristine,run}/''xxxx''

6. At the end of the upgrade, you will either see the words "Installing update in...." or "Update Succeeded!" on the screen. If you see the words "I don't think you're connected to the internet." see the notes below.

7. Wait for the prompt "-bash-3.2#" and type reboot then press Enter to restart your XO. You will probably hear the little XO tune 2 times, then it will say erasing and a countdown will appear. Finally it will reboot again, you will hear the tune for a third time. Now you are ready to go to step 8.

8. After your XO reboots, the last step is to download the new versions of Activities. When the XO boots you will see a bar toward the top of the screen that says "Software Update" and the options being "Cancel", "Later" and "Check now". Before you choose "Check now" to update the activities, you must reconnect your XO to the internet. You may see the sign-in box appear in home view. If it does, and it lists your router, you can do it from there. If it doesn't appear or offers the wrong connection, go to the Neighborhood view and connect from there. Then go back to Home view and then click "Check now" (it's ok to leave the home view because when you go back the options should still be there). First the XO will check for any updates and then it asks if you'd like to install them. Click "Install selected" to install your newest versions of your activities.

Congratulations, you've upgraded!

Note:

  • When upgrading from build 703 or 708 you will not see the Library (links to science, books, etc links on the left side) in the Browse home page. You can re-install the Library as follows:
    • Open the Control Panel and go into Software update.
    • After it checks for updates, go to "Modify activity groups" and click on the triangle.
    • Beside "Group URL" type: http://wiki.laptop.org/go/Activities/G1G1 and click the "Add" button.
    • Click "Refresh" and allow the XO to upload the new updates.
    • Click on Install selected. Once it completes, reboot.
  • If you can browse the Internet (see step 1 above) but the olpc-update command returns the error "I don't think you're connected to the internet.", you may need to open TCP port 873 (rsync) on your firewall for the outbound connection.

Offline upgrade

You can use another computer that is connected to the internet (a desktop at home, a computer lab, etc.) plus a USB storage device (such as a compatible USB flash drive) to upgrade your XO. The way it works is on your non-XO computer you download two files containing the upgrade data, saving them to the USB flash drive; then you insert the USB flash drive into your XO and trigger its upgrade process. Note that this process will COMPLETELY erase ALL files on your XO! Make sure you have backed up any files you want to save!

Plug an empty formatted USB flash drive into the computer that is connected to the internet. Then, right-click (Ctrl-click for Mac) on each of the two URLs below and choose "Save Target As" ("Save Link As" for Firefox). Save both files to the USB flash drive. Do not open the files.

The first file is about 297 KB, and the second file is quite large (about 450 MB), so they might take a while [15 - 20 min.] to download. When the download is complete, Eject/Remove the USB flash drive, and unplug it. After you have finished this step, there should be two files on the USB flash drive, the fs.zip file, and the .img file. The MD5 checksum for fs.zip is 1bb452e77b7390e00bdd7fdcc7cbc793 The MD5 checksum for gg-767-4.img is 3f281dda352d32320879728377b32476

Now, follow the steps below to complete your installation:

  1. Turn off your XO and connect your USB flash drive to it.
  2. Make sure your XO is plugged in.
  3. Hold down all four gamepad keys (on the right side of the screen, above the power button). While still holding the four gamepad keys, push the power button to turn the XO on. Keep holding down the four gamepad keys until the message "Release the game key to continue" appears on the screen.
  4. Release the gamepad keys. If you see a grid of colored boxes on your screen, congratulations! Your XO is reflashing. It will take about 10 minutes and your XO will automatically reboot when it is done. Your XO may reboot twice, playing the little XO tune.
  5. After your XO reboots, the last step is to update to the newest versions of Activities. When the XO boots you will see a bar toward the top of the screen that says "Software Update" and the options being "Cancel", "Later" and "Check now". Before you choose "Check now" to update the activities, you must reconnect your XO to the internet. You may see the sign-in box appear in home view. If it does, and it lists your router, you can do it from there. If it doesn't appear or offers the wrong connection, go to the Neighborhood view and connect from there. Then go back to Home view and then click "Check now" (it's ok to leave the home view because when you go back the options should still be there). First the XO will check for any updates and then it asks if you'd like to install them. Click "Install selected" to install the newest versions of your activities.

Congratulations, you've upgraded! Now, you should be ready to go. Have fun!

(If you chose "Later" on the software update, go to the Sugar Control Panel and select the "Software update" when you are ready to install the updates)

Resolved bugs in this release

Many bugs were closed in this release. A few important ones include:
<trac>5156</trac> Browse can view Google calendar.

<trac>5613</trac> The XO name can now accept any characters. This is important for languages which do not use the ASCII characters.

<trac>6014</trac> Activities try to save their data when the XO is shut down while an activity is open. This is better but not complete. Users should close their activities before shutting down the XO.

<trac>7480</trac> You can reset your network history in the Network control panel in case you need to remove old configurations. However, you will need to re-enter all AP passwords after doing this.

For a list of all closed bugs in this release click here.

== Notable open bugs in this release ==<nowiki>Insert non-formatted text here</nowiki>

For the best experience and maximum reliability with the XO we recommend the following best practices:

For all XOs

  • If you open too many activities (generally more than 3) at once you may experience slow response. To close activities, use the frame button (upper right), hover over the open activities, and click on close.
  • In general, you do not need to double click on anything in the XO interface. It is designed for a single click. For example, double clicking to launch an activity will cause the XO to launch two instances of the activity which may cause one to fail.
  • Drag and drop has limited support in this release. It may work in some cases but it does not work consistently everywhere.
  • Power save mode is still in development. In this release it is turned off by default in the control panel. If you use it and experience problems, please turn it off.
  • If the XO stops collaborating or stops responding, you can reboot it from the home screen (hover over the XO in the center) or hold down the power button for more than 6 seconds.
  • Ensure that you have unmounted a USB stick before removing it. Go to the Journal, hover over the USB stick icon and click on 'unmount'. Another method to remove a USB stick and avoid corruption is to power down the laptop before removing the USB stick..

For XOs used in school with many XOs present

  • Reliable collaboration using the Write activity over mesh or access point networks may not exceed two hours. If there are a lot of XOs or a lot of wireless traffic (e.g. many XOs or many access points) then Write may shut down during collaboration. In this case you may be able to reconnect Write to the collaboration in the Neighborhood view.
  • When collaborating over a Mesh (i.e. XO to XO collaboration with no access point or school server) you should limit the number of XOs on any channel to 10. There are three Mesh channels available (1,6 and 11) and each should have a maximum of 10 XOs. More XOs in a channel may cause instability in the collaboration.


  • Please see the Deployment Support pages for information on collaboration and connectivity in schools or areas that are densely populated with XOs.

Click here for a more detailed list of open bugs


API Changes

Release 8.2.0 incorporates version 0.82.1 of the Sugar UI.

API changes documents Sugar and system API changes since release 8.1.x.