Embedded controller: Difference between revisions

From OLPC
Jump to navigation Jump to search
No edit summary
No edit summary
 
(18 intermediate revisions by 9 users not shown)
Line 1: Line 1:
{{OLPC}}
{{OLPC}}
{{Translations}}
{{Translations}}
{{Olpcboxtop|toptext=[[{{PAGENAME}}|Embedded Controller]]}}
{{OBX source dev|projects/openec}}
{{Olpcboxbottom}}
== Introduction ==
== Introduction ==


The [[Hardware#XO_Laptop|XO-1 laptop]] uses a small micro-controller, an ENE KB3700 ([[Media:KB3700-ds-01.pdf|Datasheet]]), to control the battery charging operation and perform other tasks associated with starting and stopping the laptop.
⚫
OLPC is now working in an Open Source implementation of the XO's Embedded Controller firmware.


This Embedded Controller (EC) consists of a 8051 micro-controller, a dedicated LPC interface to communicate with the processor, and an SPI Flash ROM interface. The SPI Flash ROM supports two code segments, and a table of [[Manufacturing Data]]. The EC supports the Boot Hub Protocol, allowing the XO's main processor to boot from one of the code segments in the SPI Flash.
The EC hardware consists of the ENE KB3700 ([[Image:KB3700-ds-01.pdf]]), which has a 8051 microprocessor at its core. We have chosen to impliment the firmware in C, using [[SDCC]] as our compiler. Efforts are also under way to have CamelForth, a [[Forth]] implementation for the 8051, run on the KB3700.


=== Background ===
== Details ==


The EC, implemented as a KB3700, has a paramount importance in controlling the XO when the CPU is not active. To do so, the KB3700 communicates with the CPU via the [[Revised_EC_Port_6C_Command_Protocol|EC protocol]], this protocol is managed in the ports 0x66 and 0x62 of the KB3700. These two ports are serially connected with the 0x6C and 0x68 ports of the CPU (for more info check [[Ec specification]]).
The EC, implemented as a KB3700, has a paramount importance in controlling the XO when the CPU is not active. To do so, the KB3700 communicates with the CPU via the [[Revised_EC_Port_6C_Command_Protocol|EC protocol]] over a physical LPC interface. For more information, see the [[Ec specification]].


The KB3700 also communicates with the Maxim [http://www.maxim-ic.com/quick_view2.cfm/qv_pk/5104 DS2756] battery fuel gauge IC within the battery pack, via the [http://en.wikipedia.org/wiki/1-Wire 1-wire] Dallas protocol. [[Media:DS2756.pdf|DS2756 data sheet]].
The KB3700 also communicates with the Maxim [http://www.maxim-ic.com/quick_view2.cfm/qv_pk/5104 DS2756] battery fuel gauge IC within the battery pack, via the [http://en.wikipedia.org/wiki/1-Wire 1-wire] Dallas protocol. [[Media:DS2756.pdf|DS2756 data sheet]].


=== ec-status ===
One can deduce part of the internal state of the EC using [http://dev.laptop.org/~joel/ec-dump.fth ec-dump.fth] under OpenFirmware.
Running the ec-dump script gives us valuable data about internals of the EC, being the [[EC Register Settings]].
One can deduce part of the internal state of the EC using [http://dev.laptop.org/~joel/ec-dump.fth ec-dump.fth] under [[Open Firmware]]. Running the ec-dump script gives us valuable data about internals of the EC, being the [[EC Register Settings]].


The procedure to run '''ec-dump''' over internet in a wireless connection is:
The procedure to run '''ec-dump''' over internet in a wireless connection is:
Line 28: Line 25:
ok to-file u:\ec-dump fload http:\\18.85.2.147\~joel\ec-dump.fth
ok to-file u:\ec-dump fload http:\\18.85.2.147\~joel\ec-dump.fth


== OpenEc firmware project ==
== Source and Licensing ==


The firmware running on the XO-1's EC, while heavily modified and supported by OLPC, was originally written by two different companies. OLPC had no success convincing those companies to open source their code.
[[OpenEC]] is an effort for an open implementation of the firmware on the EC.
It currently is in an early stage and not functional yet.


⚫
The OLPC community did work on [[OpenEC]], an Open Source implementation of the XO-1's Embedded Controller firmware. It reached an early stage and was not functional.
⚫
=== Related Documentation ===


The XO-1.75 and XO-4 embedded controller firmware is open source. See [[Firmware]].
http://wiki.laptop.org/go/Category:EC


⚫
== Related Documentation ==
⚫
[[Media:KB3700-ds-01.pdf|ENE KB3700 Datasheet]]


*[[XO_Full_Reset|Rebooting the Embedded Controller in a laptop]]
⚫
*[[Media:KB3700-ds-01.pdf|ENE KB3700 Datasheet]]
* See other articles in [[:Category:EC]]


[[Category:Hardware]]
[[Category:Developers]]
[[Category:EC]]
[[Category:EC]]
[[Category:Firmware]]
[[Category:Firmware]]

Latest revision as of 04:05, 13 August 2013

  This page is monitored by the OLPC team.
  english | español | 한국어 HowTo [ID# 291388]  +/-  

Introduction

The XO-1 laptop uses a small micro-controller, an ENE KB3700 (Datasheet), to control the battery charging operation and perform other tasks associated with starting and stopping the laptop.

This Embedded Controller (EC) consists of a 8051 micro-controller, a dedicated LPC interface to communicate with the processor, and an SPI Flash ROM interface. The SPI Flash ROM supports two code segments, and a table of Manufacturing Data. The EC supports the Boot Hub Protocol, allowing the XO's main processor to boot from one of the code segments in the SPI Flash.

Details

The EC, implemented as a KB3700, has a paramount importance in controlling the XO when the CPU is not active. To do so, the KB3700 communicates with the CPU via the EC protocol over a physical LPC interface. For more information, see the Ec specification.

The KB3700 also communicates with the Maxim DS2756 battery fuel gauge IC within the battery pack, via the 1-wire Dallas protocol. DS2756 data sheet.

ec-status

One can deduce part of the internal state of the EC using ec-dump.fth under Open Firmware. Running the ec-dump script gives us valuable data about internals of the EC, being the EC Register Settings.

The procedure to run ec-dump over internet in a wireless connection is: 

ok wifi media lab 802.11 *change it to your name AP
ok fl http:\\18.85.2.147\~joel\ec-dump.fth *change to your AP IP direction

Running ec-dump over internet and saving the file in a USB key: 

ok wifi media lab 802.11 *change it to your name AP
ok fload http:\\18.85.2.147\~rafael\to-file.fth
ok to-file u:\ec-dump fload http:\\18.85.2.147\~joel\ec-dump.fth

Source and Licensing

The firmware running on the XO-1's EC, while heavily modified and supported by OLPC, was originally written by two different companies. OLPC had no success convincing those companies to open source their code.

The OLPC community did work on OpenEC, an Open Source implementation of the XO-1's Embedded Controller firmware. It reached an early stage and was not functional.

The XO-1.75 and XO-4 embedded controller firmware is open source. See Firmware.

Related Documentation

Retrieved from "http://wiki.laptop.org/mediawiki/index.php?title=Embedded_controller&oldid=291388"