Upgrading the firmware: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
(Redirected page to Upgrading firmware) |
||
| (One intermediate revision by one other user not shown) | |||
| Line 1: | Line 1: | ||
#REDIRECT [[Upgrading firmware]] |
|||
__TOC__ |
|||
'''Please note that you must have a [[Developer Key]] to follow these instructions.''' (On a laptop with security enabled, you must have a developer key to get access to the '''ok''' prompt. From the '''ok''' prompt, you have complete access to all of the hardware's capabilities, so allowing unrestricted access to the '''ok''' prompt completely disables the OLPC security features.) |
|||
How you update the firmware depends on what method you can use and what board type you have. |
|||
== Finding your current firmware version == |
|||
The version of the firmware is displayed by OpenFirmware when the laptop boots and prior to loading the kernel. The version number is a series of 5 digits after the text |
|||
<code>OpenFirmware CL1</code> |
|||
An example would be 'Q2B74'. The last 3 digits of this string (B74) are the most important. The 'B' stands for the 2nd major revision and originally indicated the target board for the firmware ie. BTest. The 4th major revision 'D' is being used for mass production laptops. We try hard to keep backwards compatibility so later series of firmware (with a few exceptions) run on earlier boards. |
|||
The 2 digits are the revision number of that firmware. Higher numbers equal more recent firmware versions. |
|||
On B4 machines, the firmware version is not displayed on startup, but can be found using the command: |
|||
<pre>dmesg | more</pre> |
|||
on the terminal (Ctrl-Alt-F1 and login as root). This will show a line like: |
|||
<tt>[ 10.210194] OLPC board with OpenFirmware: CL1 Q2C18 Q2C</tt> |
|||
Latest revision as of 06:20, 30 August 2013
Redirect to: