11233: Difference between revisions

Revision as of 06:22, 7 July 2014

The operating system does not run from an SD card in the external slot of an XO-1.

select an SD card of at least 4GB; the faster the better, but it will be erased by the process below,
select a USB drive of at least 1GB,
download 32014o0.zip (601 MB) and expand the contents onto the USB drive,
Shutdown the XO-1,
insert the USB drive and the SD card into the XO-1,
hold down all four game keys above the power button,
turn on the laptop,
wait for the message Release the game keys to continue,
release the game keys, progress will be displayed, grey blocks will turn green, and the screen will show:

 Blocks/square: 2        Total blocks: 14195     Now writing: 70  0 %
 Installing to SD card ..... please wait.

 Blocks/square: 2        Total blocks: 14195     Now writing: 0  0 %
 Rebooting in 10 seconds ... please wait.

when the install is finished, you may the USB drive then, during the reboot, or after the reboot.

download as above,
insert the USB drive and SD card into an XO-1.5, XO-1.75, or XO-4, but do not boot the laptop from the USB drive,
instead, at the Ok prompt, type

devalias fsdisk ext:0
fs-update u:\32014o0.zd

wait for the fs-update to complete,
remove the USB drive, insert into an XO-1, power on, wait for Sugar, verify version in My Settings, About my Computer.

@@ Line 9: / Line 9: @@
 * download [http://dev.laptop.org/~quozl/11233/32014o0.zip 32014o0.zip] (601 MB) and expand the contents onto the USB drive,
 * [[Shutdown]] the XO-1,
-* insert the USB drive and the SD card into the XO-1 using the appropriate sockets,
+* insert the USB drive and the SD card into the XO-1,
 * hold down all four game keys above the power button,
 * turn on the laptop,
 * wait for the message ''Release the game keys to continue'',
-* release the game keys, and the install will start.
+* release the game keys, progress will be displayed, grey blocks will turn green, and the screen will show:
   Blocks/square: 2        Total blocks: 14195     Now writing: 70  0 %
   Installing to SD card ..... please wait.
+* after a few minutes it will show:
-* when the install finishes:
   Blocks/square: 2        Total blocks: 14195     Now writing: 0  0 %
   Rebooting in 10 seconds ... please wait.
-* you may remove the USB drive now, during the reboot, or after the reboot.
+* when the install is finished, you may the USB drive then, during the reboot, or after the reboot.
 == Alternate Solution ==