SPI FLASH Recovery: Difference between revisions
Jump to navigation
Jump to search
(moved SPI FLASH Recovery to SPI FLASH Recovery/XO-1: different procedure for xo-1.5 to arrive) |
No edit summary |
||
| (15 intermediate revisions by 4 users not shown) | |||
| Line 1: | Line 1: | ||
Recovery from corruption or incorrect firmware in [http://en.wikipedia.org/wiki/Serial_Peripheral_Interface_Bus SPI] [http://en.wikipedia.org/wiki/Flash_memory FLASH]: |
|||
| ⚫ | |||
| ⚫ | |||
* [[SPI FLASH Recovery for XO-1.5|XO-1.5 using an XO-1.5 as host (comprehensive)]] |
|||
* [[SPI FLASH Recovery/XO-1.5|XO-1.5 using an XO-1.5 as host (brief)]] ''(these two pages yet to be merged)'' |
|||
* [[SPI FLASH Recovery/XO-1.5_Partial|XO-1.5 that was bricked by power removal during firmware upgrade]] |
|||
* [[SPI_FLASH_Recovery_for_XO-1.75_Using_CForth|XO-1.75 (using CForth)]] |
|||
* [[SPI_FLASH_Recovery_for_XO-1.75_Using_JTAG|XO-1.75 (using JTAG)]] |
|||
* [[SPI_FLASH_Recovery_for_XO-4_Using_CForth|XO-4 (using CForth)]] |
|||
* [[SPI_FLASH_Recovery_for_XO-4_Using_JTAG|XO-4 (using JTAG)]] |
|||
* [[SPI_FLASH_Recovery/XO-4|XO-4 using an XO-1.5 as host]] |
|||
Or instead of recovery, replacement: |
|||
* [[XO Replacing SPI flash]] |
|||
See also discussion at [[Firmware/Recovery]]. |
|||
Latest revision as of 23:54, 27 August 2014
Recovery from corruption or incorrect firmware in SPI FLASH:
- XO-1
- XO-1.5 using an XO-1.5 as host (comprehensive)
- XO-1.5 using an XO-1.5 as host (brief) (these two pages yet to be merged)
- XO-1.5 that was bricked by power removal during firmware upgrade
- XO-1.75 (using CForth)
- XO-1.75 (using JTAG)
- XO-4 (using CForth)
- XO-4 (using JTAG)
- XO-4 using an XO-1.5 as host
Or instead of recovery, replacement:
See also discussion at Firmware/Recovery.