EC 4.0 Firmware: Difference between revisions

From OLPC
Jump to navigation Jump to search
No edit summary
No edit summary
 
(17 intermediate revisions by 4 users not shown)
Line 1: Line 1:
== Ver: 7 0.5.01 ==
* [http://dev.laptop.org/pub/firmware/ec/cl4-7_0_5_01.img 0.5.01]
* Add support for new Simplo LiPoly battery
* Remove support for NiMH battery (which was never used in mass production, but was made in small quantities for testing; SKU295 through to SKU298), see [http://dev.laptop.org/git/users/rsmith/ec-cl4-mmp3/commit/?id=aeff6adea26543463ba30ff10038632b5ae76705 further change detail], and [https://dev.laptop.org/ticket/12909#comment:6 workaround for old prototypes].
* Change default compiler to SDCC
* Requires new kernel, see [http://dev.laptop.org/git/olpc-kernel/commit/?h=arm-3.5&id=cd558cfa49321630908d5ff85174783ea08c89b1 kernel patch]

== Ver: 7 0.4.12 ==
* [http://dev.laptop.org/pub/firmware/ec/cl4-7_0_4_12.img 0.4.12]
* emit a new event when the power button is released, so a kernel can time the press.
* increase the hard powerdown button press timeout from 2 to 5 seconds to give user-level more flexibility when looking for long presses.
== Ver: 7 0.4.11 ==
* [http://dev.laptop.org/pub/firmware/ec/cl4-7_0_4_11.img 0.4.11]
* reinit AC detect timer when leaving forced discharge mode, to avoid erroneous low-battery power-downs. this mode is only during testing (runin, and battery-capacity tests).
* this release didn't make it into the next release of Open Firmware, Q7B37. --[[User:Quozl|Quozl]] 01:35, 26 February 2014 (UTC)
== Ver: 7 0.4.10 ==
* [http://dev.laptop.org/pub/firmware/ec/cl4-7_0_4_10.img 0.4.10]
* Fix for #12704, which caused the power LED to behave incorrectly after short resumes.
== Ver: 7 0.4.09 ==
* [http://dev.laptop.org/pub/firmware/ec/cl4-7_0_4_09.img 0.4.09]
* Reduce post-reprogramming power draw. After an EC reflash, an extra flash of the LEDs will be seen the first time the laptop is powered off while on battery only.
== Ver: 7 0.4.08 ==
* [http://dev.laptop.org/pub/firmware/ec/cl4-7_0_4_08.img 0.4.08]
* Change runin discharge disable so its ahead of poweroff
* Fix stupid mistake in commit b7e7fd817c86
== Ver: 7 0.4.07 ==
* [http://dev.laptop.org/pub/firmware/ec/cl4-7_0_4_07.img 0.4.07]
* NiMH charging in very cold temperature tweaks
* Disable the 2 stop mode problem checks
* Reduce stop mode power draw
== Ver: 7 0.4.06 ==
* [http://dev.laptop.org/pub/firmware/ec/cl4-7_0_4_06.img 0.4.06]
* Allow monitor DEBUG_CMDS to enable support functions
* Drop max LiFe charge rate to 2.5A
* Fix runin discharge XO-4 C2 crash
* ec_irq: add support for suppressing the fallback pulse, for debug
* ec_irq: move the remaining EC timing support from monitor.c to ec_irq.c

== Ver: 7 0.4.05 ==
* [http://dev.laptop.org/pub/firmware/ec/cl4-7_0_4_05.img 0.4.05]
* debug support for wakeup issues

== Ver: 7 0.4.04 ==
* [http://dev.laptop.org/pub/firmware/ec/cl4-7_0_4_04.img 0.4.04]
* further changes for managing keyboard and touchpad flow control, fixing yet another lockup-on-resume scenario.

== Ver: 7 0.4.03 ==
== Ver: 7 0.4.03 ==
* [http://dev.laptop.org/pub/firmware/ec/cl4-7_0_4_03.img 0.4.03]
* [http://dev.laptop.org/pub/firmware/ec/cl4-7_0_4_03.img 0.4.03]
* fallout from the changes in 0.4.02 caused keyboard and touchpad flow control
* fallout from the changes in 0.4.02 caused keyboard and touchpad flow control to not be asserted in some cases. this in turn caused SoC lockups on resume from suspend.
to not be asserted in some cases. this in turn caused SoC lockups on resume
from suspend.


== Ver: 7 0.4.02 ==
== Ver: 7 0.4.02 ==

Latest revision as of 01:01, 22 July 2015

Ver: 7 0.5.01

Ver: 7 0.4.12

  • 0.4.12
  • emit a new event when the power button is released, so a kernel can time the press.
  • increase the hard powerdown button press timeout from 2 to 5 seconds to give user-level more flexibility when looking for long presses.

Ver: 7 0.4.11

  • 0.4.11
  • reinit AC detect timer when leaving forced discharge mode, to avoid erroneous low-battery power-downs. this mode is only during testing (runin, and battery-capacity tests).
  • this release didn't make it into the next release of Open Firmware, Q7B37. --Quozl 01:35, 26 February 2014 (UTC)

Ver: 7 0.4.10

  • 0.4.10
  • Fix for #12704, which caused the power LED to behave incorrectly after short resumes.

Ver: 7 0.4.09

  • 0.4.09
  • Reduce post-reprogramming power draw. After an EC reflash, an extra flash of the LEDs will be seen the first time the laptop is powered off while on battery only.

Ver: 7 0.4.08

  • 0.4.08
  • Change runin discharge disable so its ahead of poweroff
  • Fix stupid mistake in commit b7e7fd817c86

Ver: 7 0.4.07

  • 0.4.07
  • NiMH charging in very cold temperature tweaks
  • Disable the 2 stop mode problem checks
  • Reduce stop mode power draw

Ver: 7 0.4.06

  • 0.4.06
  • Allow monitor DEBUG_CMDS to enable support functions
  • Drop max LiFe charge rate to 2.5A
  • Fix runin discharge XO-4 C2 crash
  • ec_irq: add support for suppressing the fallback pulse, for debug
  • ec_irq: move the remaining EC timing support from monitor.c to ec_irq.c

Ver: 7 0.4.05

  • 0.4.05
  • debug support for wakeup issues

Ver: 7 0.4.04

  • 0.4.04
  • further changes for managing keyboard and touchpad flow control, fixing yet another lockup-on-resume scenario.

Ver: 7 0.4.03

  • 0.4.03
  • fallout from the changes in 0.4.02 caused keyboard and touchpad flow control to not be asserted in some cases. this in turn caused SoC lockups on resume from suspend.

Ver: 7 0.4.02

  • 0.4.02
  • fix EC/SoC communication problems (#12525).

Ver: 7 0.4.01

  • 0.4.01
  • further lengthen EC_IRQ# timings for 1Ghz machines

Ver: 7 0.4.00

  • 0.4.00
  • Fix trac <trac>12558</trac>. Power LED while system is off
  • disable the "rescue" EC_IRQ# assertion

Ver: 7 0.3.13

  • 0.3.13
  • revert wakeup timings to 3.0.11 values

Ver: 7 0.3.12

  • 0.3.12
  • ec_irq: add fallback to bail us out of incomplete suspends
  • ec_irq: implement timing tuning commands in monitor

Ver: 7 0.3.11

  • 0.3.11
  • Allow battery debugging to be enabled via serial port
  • Fix incorrect battery critical LED state
  • Change W to mW in battery debug output to make the scale clearer
  • Add debounce for the thermal alarm signal and enable a new LED state when triggered. (Alternating power LED and red battery LED)
  • Blink code for high battery current prior to stop mode (Alternating Green/Yellow)
  • Blink code for exiting stop mode while power is off (Alternating Green/Red)

Ver: 7 0.3.10

  • 0.3.10
  • Fix NiMH pre-maturely marked full problem

Ver: 7 0.3.09

  • 0.3.09
  • Fix logic bug in ext power detect after runin discharge. Machines turning off runin discharge could fail to sense external power.
  • Print ACR value and SOC when going into stop mode
  • Refactor critical and low flag handling to fix corner cases. There were several corner cases where you could get the previous code to display the wrong LED state.
  • Add support for GP LiFePO4 batteries. There are few around the Twine offices.
  • Turn off battery state debugs in LiFePO4 code
  • kbdwatch: wait longer after seeing SOC_SLEEP to release flow-control. Fixes a lockup on 1Ghz MMP3.

Ver: 7 0.3.08

  • 0.3.08
  • Make sure full flag is clear when SOC is < 95%
  • Up bad ACR read difference threshold to 20 counts
  • Come out of stop mode once in a while, to do housekeeping
  • adjust the timings for the EC_IRQ assertions

Ver: 7 0.3.07

  • 0.3.07
  • Check battery EEPROM bank 0 values and fix them if wrong
  • Detect bad ACR register reads from the battery due to ESD and discard them
  • Generate 2 wake up interrupts to the SoC on resume. One to make it wake up and then a 2nd to actually make it start executing. Works around resume problems.

Ver: 7 0.3.06

  • 0.3.06
  • Change battery over temperature indicator to be a pulse of dark (both LEDs off) rather than a pulse of red. Red is now exclusively for errors.
  • Fix typo in IO map causing LV_SET code to mess with EC_IRQ.

Catagory:EC