Wifi Troubleshooting Guide: Difference between revisions

From OLPC
Jump to navigation Jump to search
No edit summary
 
(33 intermediate revisions by 14 users not shown)
Line 1: Line 1:
{{G1G1 Support FAQ}}
{{G1G1 Support FAQ}}


===Is the wifi hotspot dot visible?===
=== Is your network name visible? ===


In the [[Neighborhood View]], you should clearly see your wifi hotspot's network name. If you cannot see the network name...
After the laptop starts up, the [[Neighborhood View]] should show a circle for each network. Move the mouse over each to see the network name. If your network name is not shown, then perhaps:


* you have a hidden network;
==== hidden SSID ====


::Is your network hidden? You cannot connect to a hidden network in Sugar. You can switch to Gnome to connect, and then switch back to Sugar. Some deployment teams have added hidden network support, contact Sugar Labs.
Is your SSID/Network Name Hidden? This makes it impossible (currently) for the XO to connect to your wireless network through the Sugar UI. It is possible to connect manually by typing commands in [[Terminal]].


* you hit our bug: and networks appear very slowly;
==== access point not in channels 1, 6 or 11.====


::OLPC OS 13.2.0 and earlier don't show networks quickly enough, especially when there are many hidden networks or XO-1 laptops nearby. Call your deployment team to get it fixed, or see [[12757]] for details and a fix from OLPC.
Is your access point working on another channel (not in 1, 6 or 11)? The XO expects to find access points in one of these three channels (after all, these are the three non interfering channels available to 802.11g). You need to change your access point to one of the three in order to associate your XO to it.


* your operating system is too old;
===Why can't the XO Browse When Connected? ===

::Is your network on another channel other than 1, 6 or 11)? For some very old operating system releases, only these channels are scanned. Try upgrading. Try changing your network to one of these channels and check if you can connect to it.

* your network is restricted to certain MAC addresses;

::Does your network have a white list of MAC addresses? To learn the MAC address of your XO laptop, go to Terminal, then type {{code|ifconfig}}. If your network is restricted to a white list of MAC addresses, add your laptop to the list.

===Why can't the XO browse when connected? ===


Symptom: I can connect, but I cannot browse/search any pages.
Symptom: I can connect, but I cannot browse/search any pages.
Line 22: Line 30:
Verify what the XO has received (from the Internet access point) for DNS information by using the Browse activity and looking at this URL:
Verify what the XO has received (from the Internet access point) for DNS information by using the Browse activity and looking at this URL:


file://localhost/etc/resolv.conf
file://localhost/etc/resolv.conf


This page should show the IP address of the DNS server assigned by the Internet access point. If there isn't an IP address on this page, or if the IP address assigned is wrong, this would account for the behavior you're seeing.
This page should show the IP address of the DNS server assigned by the Internet access point. If there isn't an IP address on this page, or if the IP address assigned is wrong, this would account for the behavior you're seeing.
Line 30: Line 38:
===What common wireless symptoms do users report?===
===What common wireless symptoms do users report?===


1. I cannot associate to an Access Point from the mesh view. (The symptom is usually a flashing circle icon where the rim of the circle never turns white—this indicates the XO is trying to connect, but the connection fails.)
* I cannot connect to a network from the network neighbourhood view. (The symptom is usually a flashing circle icon where the rim of the circle never turns white—this indicates the XO is trying to connect, but the connection fails.)

* I associate but I have no connectivity; or I cannot access the Internet from the browser in my XO.

* I cannot connect to my network because it is a hidden network. (see: [[Ask OLPC a Question about the Network#Manually adding a wireless network]])


* The password window disappears, the network starts blinking and after some time, the password window is displayed again.
2 - I associate but I have no connectivity; or I cannot access the Internet from the
browser in my XO.


=== How to test the antenna? ===
3 - I cannot connect to my Access Point since it has a hidden SSID/ESSID (network name) (see: [[Ask_OLPC_a_Question_about_the_Network#manually_adding_a_wireless_network]])


The antenna can be broken by dropping or too much rotating. Sometimes it can look fine but still be broken inside. A broken antenna may stop internet, or may restrict it to work only right next to an access point of a network. See [[Antenna testing]] for how to test the antenna.


===What information is needed to help diagnose wireless problems?===
===What information is needed to help diagnose wireless problems?===
Line 42: Line 54:
If you are experiencing problems with wireless connectivity, here is a list of information that you should provide your friends and OLPC community, so they can help you in the diagnosis of the wireless problems.
If you are experiencing problems with wireless connectivity, here is a list of information that you should provide your friends and OLPC community, so they can help you in the diagnosis of the wireless problems.


1. The software build on your XO. Please see this [[How to check the OS and firmware versions]] page to find your software build.
* The software build on your XO. Please see this [[How to check the OS and firmware versions]] page to find your software build.


2. The access point/router brand, model, version, and firmware version (ideally).
* The access point/router brand, model, version, and firmware version (ideally).


3. The security configuration of your wireless home system. Most access points will be open (security disabled) by defualt. If you configured it to use cryptography (WEP, WPA, WPA2, etc) you should gather this information.
* The security configuration of your wireless home system. Some access points will be open (security disabled) by default. If you configured it to be secure, you should gather this information; the type of security, and whether it works from another computer.


4. The description of the problem.
* The description of the problem.


Other useful information you should consider adding to your description:
Other useful information you should consider adding to your description:


* Do you see the wifi Access Point in the mesh view?
* Do you see the network in the mesh view?
* Have you previously successfully connected to this Access Point from an XO?
* Have you previously successfully connected to this network from an XO?
* Can you connect to the Access Point from another non-XO laptop?
* Can you connect to the network from another non-XO laptop?
* Is the Access Point displayed as protected (a lock badge appears), or as open in the mesh view? Is it consistent to the Access Point's configuration?
* Is the network displayed as protected (a lock badge appears), or as open in the mesh view? Is it consistent to the Access Point's configuration?
* When you click on the Access Point circle does it:<br>
* When you click on the network circle does it:<br>
** start blinking and after some time stop, without connecting? (no external white circle)
** start blinking and after some time stop, without connecting? (no external white circle)
** prompt for a window with:
** prompt for a window with:
*** a menu for "Encryption type" only
*** a menu for "Encryption type" only
*** a menu for "Key type" and another for "Association Type"
*** a menu for "Key type" and another for "Association Type"
* In case you have a protected Access Point what happens after you type in a passphase or a key?
* In case you have a secured network, what happens after you type in a passphase or a key?
** It immediately returns and empty dialog window
** Nothing happens when I click OK
** The window disappears, the Access Point's circle starts blinking and after some time, the windows is displayed again.
** The window disappears, the Access Point's circle starts blinking and after some time nothing happens (no connectivity - no white external circle)

Latest revision as of 03:46, 12 February 2014

This page is part of the XO Support FAQ.     Support Index | Print This Page
<imagemap>

Image:Support-banner-square.png|173px|community support pages rect 0 0 135 204 [1] rect 135 0 345 204 Support FAQ rect 0 205 135 408 [2]

  1. Comment : there's some whitespace here:

rect 135 205 345 408 Other support

  1. maybe desc none is better. testing.

desc none

</imagemap>

Is your network name visible?

After the laptop starts up, the Neighborhood View should show a circle for each network. Move the mouse over each to see the network name. If your network name is not shown, then perhaps:

  • you have a hidden network;
Is your network hidden? You cannot connect to a hidden network in Sugar. You can switch to Gnome to connect, and then switch back to Sugar. Some deployment teams have added hidden network support, contact Sugar Labs.
  • you hit our bug: and networks appear very slowly;
OLPC OS 13.2.0 and earlier don't show networks quickly enough, especially when there are many hidden networks or XO-1 laptops nearby. Call your deployment team to get it fixed, or see 12757 for details and a fix from OLPC.
  • your operating system is too old;
Is your network on another channel other than 1, 6 or 11)? For some very old operating system releases, only these channels are scanned. Try upgrading. Try changing your network to one of these channels and check if you can connect to it.
  • your network is restricted to certain MAC addresses;
Does your network have a white list of MAC addresses? To learn the MAC address of your XO laptop, go to Terminal, then type ifconfig. If your network is restricted to a white list of MAC addresses, add your laptop to the list.

Why can't the XO browse when connected?

Symptom: I can connect, but I cannot browse/search any pages.

Most likely, the XO has failed to receive DNS information from your internet access point. If this is the case, you would be able to access the Internet for sites named directly with IP addresses but not their common names. In other words, http://209.85.133.18/ would work but http://www.google.com/ would not.

Verify what the XO has received (from the Internet access point) for DNS information by using the Browse activity and looking at this URL:

 file://localhost/etc/resolv.conf

This page should show the IP address of the DNS server assigned by the Internet access point. If there isn't an IP address on this page, or if the IP address assigned is wrong, this would account for the behavior you're seeing.

If there is no IP address, or the address is wrong, you'll need to determine why the Internet access point is failing to supply one, but this is likely to be misconfiguration of the access point.

What common wireless symptoms do users report?

  • I cannot connect to a network from the network neighbourhood view. (The symptom is usually a flashing circle icon where the rim of the circle never turns white—this indicates the XO is trying to connect, but the connection fails.)
  • I associate but I have no connectivity; or I cannot access the Internet from the browser in my XO.
  • The password window disappears, the network starts blinking and after some time, the password window is displayed again.

How to test the antenna?

The antenna can be broken by dropping or too much rotating. Sometimes it can look fine but still be broken inside. A broken antenna may stop internet, or may restrict it to work only right next to an access point of a network. See Antenna testing for how to test the antenna.

What information is needed to help diagnose wireless problems?

If you are experiencing problems with wireless connectivity, here is a list of information that you should provide your friends and OLPC community, so they can help you in the diagnosis of the wireless problems.

  • The access point/router brand, model, version, and firmware version (ideally).
  • The security configuration of your wireless home system. Some access points will be open (security disabled) by default. If you configured it to be secure, you should gather this information; the type of security, and whether it works from another computer.
  • The description of the problem.

Other useful information you should consider adding to your description:

  • Do you see the network in the mesh view?
  • Have you previously successfully connected to this network from an XO?
  • Can you connect to the network from another non-XO laptop?
  • Is the network displayed as protected (a lock badge appears), or as open in the mesh view? Is it consistent to the Access Point's configuration?
  • When you click on the network circle does it:
    • start blinking and after some time stop, without connecting? (no external white circle)
    • prompt for a window with:
      • a menu for "Encryption type" only
      • a menu for "Key type" and another for "Association Type"
  • In case you have a secured network, what happens after you type in a passphase or a key?