Disassembly XO person: Difference between revisions

Latest revision as of 05:35, 10 June 2008

This is a description of how to remove the XO person on the back of an XO laptop. This is part of the Disassembly section of the Troubleshooting Guide and Repair Manual.

It is recommended to swap covers to change the XO colors, instead of swapping just the "XO person"

Turn the back plate over. Note where the colored plastic fits in.

Use a screwdriver to pop these out

Turn plate over so the XO man faces you. Pull the plastic part out.

Note how the tabs fit in with the back plate.

Fit the new piece in the back plate and snap it back in place.

@@ Line 1: / Line 1: @@
 {{TOCright}}
-This is a description of how to disassemble the top section of an [[Hardware|B4 preproduction XO laptop]] to replace the wireless antenna (rabbit ears).  This is part of the [[Disassembly]] section of the [[XO_Troubleshooting_Guide|Troubleshooting Guide]] and [[Repair|Repair Manual]].
+This is a description of how to remove the XO person on the back of an [[Hardware|XO laptop]].  This is part of the [[Disassembly]] section of the [[XO_Troubleshooting_Guide|Troubleshooting Guide]] and [[Repair|Repair Manual]].
 == Removing the "XO Person" on the back cover ==