Clean-install procedure for 8.2: Difference between revisions

From OLPC
Jump to navigation Jump to search
mNo edit summary
No edit summary
 
(76 intermediate revisions by 26 users not shown)
Line 1: Line 1:
{{Deprecated|<center>Release 8.2 is obsolete, please see the installation section of the release notes in the [[release|latest stable release]].</center>}}
== Official and Candidate Builds ==
This page provides parallel instructions for installing both signed builds (official or candidate releases) and unsigned development builds for [[Friends in Testing]].
{{public}}


Note that a clean install will reflash your XO; '''everything you created will be deleted.''' See [[olpc-update]] for an update mechanism that preserves some data.
[[Image:Power-button.jpg|thumb|right|Power & Game buttons for B2 and older XOs. B3 and newer have "O" at the top and "✓" (check) at the right.]]


== What version is available? ==
# Download the OS image and its signatures file to your local computer. DO NOT open them. P.S. If your computer runs on MS Windows, point your cursor on the link, click the right mouse button and choose "Save Link Target As".
<!-- Section copied from [[olpc-update]], keep the two pages in sync -->
#* Official OS images can be downloaded from [http://download.laptop.org/xo-1/os/official/], [http://download.laptop.org/xo-1/os/candidate/], and ''sometimes'' from [[http://download.laptop.org/xo-1/os/custom/]].
You need to identify the "build" to which you want to update your system.
# Copy these files onto of a clean (Full (not Quick!) formatted) USB memory stick. Your USB memory stick should now contain two files named something like: en708-1.img and fs.zip.
# Unmount the USB memory stick and disconnect it from your computer when it is safe to do so.
# Shut down your XO laptop. Insert the USB stick into the XO Laptop and power up while holding the four game keys. (this is VERY important!)
# Release game keys when it asks you to. It will take a few minutes to rewrite the memory.
# Reboot.
# Check that you have the correct build:
#* Hover over the XO in the Home screen and click on 'About my XO'
#* Check that the build number matches build number of the image file you downloaded, e.g. 'Update.1 708, firmware Q2D16' for en708-1.


* This page describes how to update to the 8.2 release from 2009.
== Development Builds ==
* To install the latest release, see [[Release notes|the latest release notes]]. You may need to first [[Upgrading_firmware|upgrade your firmware]].

For G1G1 users, [[Release_Notes/8.2.0#If_your_XO_is_not_connected_to_the_internet|the 8.2.0 release notes]] offer the most concise instructions for restoring the factory configuration.


== Official releases and candidate builds ==
{{users}}
[[Image:YamaDone.JPG|thumb|''for new users'' [[USB_update|<br>'''illustrated guide to updating using a USB stick<br>''']]]]

<!-- The USB flash drive requirements are in common with other pages -->
You'll need a USB storage device such as a flash drive, with a capacity of 500 MB or higher. It should be formatted as FAT or FAT32, and only contain one partition. Most ordinary USB flash drives are set up this way, except "U3" flash drives which may not work. Remove U3 with uninstall software from http://www.u3.com/uninstall or http://u3uninstall.s3.amazonaws.com/U3Uninstall.exe

# Attach the USB storage device to your local (NOT the XO!) computer.
# Perform a clean (Full, not Quick!) format of the USB storage device.
# Download the OS image named <tt>''someversion''.img</tt> (e.g. <tt>gg-802-1.img</tt>) and the signature file <tt>fs.zip</tt> to the USB storage device. These are compressed files, but DO NOT open them &mdash; in your browser click the right mouse button over the link and choose "Save Link/Target As...".
#* For release 8.2.1 with activities included, use gg-802-1.img and fs.zip from<br>http://download.laptop.org/xo-1/custom/g1g1/gg-802-1/
#* For release 8.2.0 with activities included, use gg-767-4.img and fs.zip from<br>http://download.laptop.org/xo-1/custom/g1g1/gg-767-4/
#* For other releases without activities included, see subdirectories of<br>http://download.laptop.org/xo-1/os/official/
# Your USB storage device should now contain two files (in the root) named something like: <tt>gg-802-1.img</tt> and <tt>fs.zip</tt>.
# Unmount the USB storage device and disconnect it from your computer when it is safe to do so.
# Plug your XO laptop into an electrical outlet and make sure the battery is locked in place.
# [[Shutdown]] the XO.
# [[Image:Power-button.jpg|thumb|right|Power & Game buttons for B2 and older XOs. B3 and newer have "O" at the top and "✓" (check) at the right.]] Connect the USB storage device to the XO Laptop and power up while holding all the four game keys. (this is VERY important!)
# Release the game keys when the XO asks you to. The XO will take a few minutes to rewrite its memory with the new OS image.
# [[Reboot]] the XO. If the new build includes newer [[firmware]], then your XO will reboot twice. When the XO restarts the update will be complete.
# Check that the XO has the correct build loaded:
#* Follow [[How to check the OS and firmware versions]].
#* Verify that the build number matches build number of the image file you downloaded, e.g. "Update.1 708, firmware Q2D16" for en708-1.
# You may then need to [[Activity installation|install activities]].

== Development builds ==
{{developers}}
{{developers}}


* Read [[OS images]] and its table of releases to choose an appropriate build.
# Get a [[Developer key#Getting a Developer Key for your Running XO Laptop|developer key]] for your XO laptop.
** ''Other OS images can be found at [http://xs-dev.laptop.org/~cscott/xo-1/streams/joyride/ joyride build stream] (e.g. [http://xs-dev.laptop.org/~cscott/xo-1/streams/joyride/build2230/devel_jffs2/ joyride-2230]) and from many other sources.''
# Download the OS image and its CRC file to your local computer. DO NOT open them. P.S. If your computer runs on MS Windows, point your cursor on the link, click the right mouse button and choose "Save Link Target As".
* Download the OS image (e.g. {{{{:Friends in testing/current image stream}}-img-link}}) and its CRC file (e.g. {{{{:Friends in testing/current image stream}}-crc-link}}) to your local computer.
# Copy these files onto of a clean (Full (not Quick!) formatted) USB memory stick. Your USB memory stick should now contain two files named: for example, os708.img and os708.crc.
**Important: DO NOT open these links just by clicking on them.
# Unmount the USB memory stick and disconnect it from your computer when it is safe to do so.
**If your computer runs MS Windows, click your right mouse button on the link and choose "Save Link Target As".
# Shut down your XO laptop. Insert the USB stick into the XO Laptop and power up while holding the escape key (the circled "x" in the upper left corner of the keyboard).
**If you are using a Mac, use Safari for the downloads and hold down the control key when you click on the link and choose "Download linked file as..."
# Release the 'x' key when it asks you to. You should be at the [[Firmware|OpenFirmware]] "ok" prompt.
**Firefox will also work, use "Save Link As...").
# Assuming that your disk image is named _____.img, type
* Prepare a clean (Full (not Quick!) formatted) USB flash drive.
copy-nand u:\____.img
* Get a [[Developer_key#Getting_a_developer_key_for_your_running_XO_laptop|developer key]] for your XO laptop and save it as <tt>develop.sig</tt> in a folder <tt>security</tt> on the USB flash drive.
7. Press Enter, then wait while your machine reflashes.
8. When the "ok" prompt returns, reboot the machine.
* Copy the OS image files onto the USB flash drive,
**the files should be next to the security folder and not in it.
**your USB flash drive should now contain two files named, for example, <tt>os''{{:Friends in testing/current image number}}''.img</tt> and <tt>os''{{:Friends in testing/current image number}}''.crc</tt> (and possibly the <tt>/security</tt> directory).
* Unmount the USB flash drive and disconnect it from your computer when it is safe to do so.
* [[Shutdown]] the XO laptop.
* Insert the USB flash drive into the XO laptop and power up to the "ok" prompt, (see [[Ok]] for how),
* Install the image by typing
probe-usb copy-nand disk:\os''NNN''.img
where os''NNN''.img is the file you downloaded (e.g. os2230.img, or en708-1.img).
* Press Enter, then wait while your machine reflashes.
* When the "ok" prompt returns, reboot the machine by typing:
bye

Note: This procedure can be used for builds signed with the OLPC key. If it is used for builds signed with other keys, it is necessary to [[Developer_key#Disable_the_security_system|disable security ]] otherwise the developer key will need to be in the USB for every boot.

[[Category:Update paths]]

Latest revision as of 01:52, 8 December 2011

Stop hand.png WARNING:
The content of this section is considered
DEPRECATED and OBSOLETE
It is preserved for historical or documenting reasons.
Release 8.2 is obsolete, please see the installation section of the release notes in the latest stable release.

This page provides parallel instructions for installing both signed builds (official or candidate releases) and unsigned development builds for Friends in Testing.

Note that a clean install will reflash your XO; everything you created will be deleted. See olpc-update for an update mechanism that preserves some data.

What version is available?

You need to identify the "build" to which you want to update your system.

For G1G1 users, the 8.2.0 release notes offer the most concise instructions for restoring the factory configuration.


Official releases and candidate builds

  For the general public

You'll need a USB storage device such as a flash drive, with a capacity of 500 MB or higher. It should be formatted as FAT or FAT32, and only contain one partition. Most ordinary USB flash drives are set up this way, except "U3" flash drives which may not work. Remove U3 with uninstall software from http://www.u3.com/uninstall or http://u3uninstall.s3.amazonaws.com/U3Uninstall.exe

  1. Attach the USB storage device to your local (NOT the XO!) computer.
  2. Perform a clean (Full, not Quick!) format of the USB storage device.
  3. Download the OS image named someversion.img (e.g. gg-802-1.img) and the signature file fs.zip to the USB storage device. These are compressed files, but DO NOT open them — in your browser click the right mouse button over the link and choose "Save Link/Target As...".
  4. Your USB storage device should now contain two files (in the root) named something like: gg-802-1.img and fs.zip.
  5. Unmount the USB storage device and disconnect it from your computer when it is safe to do so.
  6. Plug your XO laptop into an electrical outlet and make sure the battery is locked in place.
  7. Shutdown the XO.
  8. Power & Game buttons for B2 and older XOs. B3 and newer have "O" at the top and "✓" (check) at the right.
    Connect the USB storage device to the XO Laptop and power up while holding all the four game keys. (this is VERY important!)
  9. Release the game keys when the XO asks you to. The XO will take a few minutes to rewrite its memory with the new OS image.
  10. Reboot the XO. If the new build includes newer firmware, then your XO will reboot twice. When the XO restarts the update will be complete.
  11. Check that the XO has the correct build loaded:
  12. You may then need to install activities.

Development builds

  • Read OS images and its table of releases to choose an appropriate build.
  • Download the OS image (e.g. Template:Official-img-link) and its CRC file (e.g. Template:Official-crc-link) to your local computer.
    • Important: DO NOT open these links just by clicking on them.
    • If your computer runs MS Windows, click your right mouse button on the link and choose "Save Link Target As".
    • If you are using a Mac, use Safari for the downloads and hold down the control key when you click on the link and choose "Download linked file as..."
    • Firefox will also work, use "Save Link As...").
  • Prepare a clean (Full (not Quick!) formatted) USB flash drive.
  • Get a developer key for your XO laptop and save it as develop.sig in a folder security on the USB flash drive.
  • Copy the OS image files onto the USB flash drive,
    • the files should be next to the security folder and not in it.
    • your USB flash drive should now contain two files named, for example, osos860.img and osos860.crc (and possibly the /security directory).
  • Unmount the USB flash drive and disconnect it from your computer when it is safe to do so.
  • Shutdown the XO laptop.
  • Insert the USB flash drive into the XO laptop and power up to the "ok" prompt, (see Ok for how),
  • Install the image by typing
 probe-usb copy-nand disk:\osNNN.img

where osNNN.img is the file you downloaded (e.g. os2230.img, or en708-1.img).

  • Press Enter, then wait while your machine reflashes.
  • When the "ok" prompt returns, reboot the machine by typing:
 bye

Note: This procedure can be used for builds signed with the OLPC key. If it is used for builds signed with other keys, it is necessary to disable security otherwise the developer key will need to be in the USB for every boot.