Tests/SmokeTest/Distance: Difference between revisions

From OLPC
Jump to navigation Jump to search
(New page: {{Test case |testcase_name=Distance |testcase_category=SmokeTest |testcase_subcategory=Distance |testcase_stream=Any |testcase_objective=Get 2 XOs running the distance activity |testcase_t...)
 
No edit summary
 
(8 intermediate revisions by 4 users not shown)
Line 3: Line 3:
|testcase_category=SmokeTest
|testcase_category=SmokeTest
|testcase_subcategory=Distance
|testcase_subcategory=Distance
|testcase_stream=Any
|testcase_stream=8.2.1, 11.2, Any
|testcase_objective=Get 2 XOs running the distance activity
|testcase_objective=Get 2 XOs running the distance activity
|testcase_tools=2 XO units
|testcase_tools=2 XO units
|testcase_procedure=''Actions''
|testcase_procedure=''Actions''
# On both XO's click on the same network (whatever is available) in each of their mesh views; confirm they are both connected
# On both XO's click on the same network (whatever is available) in each of their network views; confirm they are both connected
# Open Distance with one XO
# Open Distance with one XO
# Share the activity with the neighborhood
# Share the activity with the neighborhood
# Go to the Mesh view of that XO
# Go to the Network view of that XO
# Go to the Mesh view of the second XO
# Go to the Network view of the second XO
# In the mesh view of the second XO click on the distance activity that the first one just shared
# In the network view of the second XO click on the distance activity that the first one just shared
# On the first XO press the check key on the game pad to start measuring the distance
# On the first XO press the check key on the game pad to start measuring the distance
# Close the Distance activity
# Close the Distance activity
# Follow the same steps, but starting with the second XO (see that it works both ways)
# Follow the same steps, but starting with the second XO (see that it works both ways)

|testcase_expectedresults=''Verify''
|testcase_expectedresults=''Verify''
* The shared Distance activity shows up in the mesh view of both laptops
* The shared Distance activity shows up in the mesh view of both laptops
Line 23: Line 22:
* Both XOs should show the distance between each other on the screen
* Both XOs should show the distance between each other on the screen
* Distance works both ways
* Distance works both ways

}}
}}
{{Test results begin}}
{{Test results begin}}
{{Test results
|testresult_release=Candidate
|testresult_stream=8.2
|testresult_build=760
|testresult_passfail=Pass
}}
{{Test results
|testresult_release=Candidate
|testresult_stream=8.2
|testresult_build=762
|testresult_passfail=Pass
}}
{{Test results
|testresult_release=Candidate
|testresult_stream=8.2
|testresult_build=766
|testresult_passfail=Pass
|testresult_comments=Signed upgrade, fine both ways.
}}
{{Test results
|testresult_release=Candidate
|testresult_stream=8.2
|testresult_build=766
|testresult_passfail=Pass
|testresult_comments=olpc-upgrade candidate-766 lookin' good!
}}
{{Test results
|testresult_release=Candidate
|testresult_stream=8.2
|testresult_build=767
|testresult_passfail=Pass
|testresult_comments=used an XO that was usb upgraded from 656 to 767 and an XO clean installed with 767. worked great on mesh channel 11
}}
{{Test results
|testresult_release=Candidate
|testresult_stream=8.2
|testresult_build=767
|testresult_passfail=Pass
|testresult_comments=using two copy-nand clean installed gg-767-4 machines on channel 6, worked great.
}}
{{Test results
|testresult_release=8.2.0 (767)
|testresult_stream=8.2
|testresult_build=767
|testresult_passfail=Pass
|testresult_comments=smoke testing new firmware q2e21, activity worked on both mesh11 and ml1cc.
|testresult_date=2008/11/05
}}
{{Test results end}}
{{Test results end}}

Latest revision as of 19:40, 9 February 2011

Test case: Short name::Distance
How to report results

Stream ,|x|Build stream::x}}
Category Test category::SmokeTest Sub-category Test subcategory::Distance
Component System component::
Feature System feature::
Objective Test objective::Get 2 XOs running the distance activity
Tools Test tools::2 XO units
Setup Test setup::
Procedure [[Test procedure::Actions
  1. On both XO's click on the same network (whatever is available) in each of their network views; confirm they are both connected
  2. Open Distance with one XO
  3. Share the activity with the neighborhood
  4. Go to the Network view of that XO
  5. Go to the Network view of the second XO
  6. In the network view of the second XO click on the distance activity that the first one just shared
  7. On the first XO press the check key on the game pad to start measuring the distance
  8. Close the Distance activity
  9. Follow the same steps, but starting with the second XO (see that it works both ways)]]
Expected Results
and Pass Criteria 		[[Pass criteria::Verify
  • The shared Distance activity shows up in the mesh view of both laptops
  • The tiny circle with a check on the screen of both XOs should turn green
  • The first XO should make sounds after the check key is pressed
  • Both XOs should show the distance between each other on the screen
  • Distance works both ways]]
Comments More notes::
Release Stream Build Pass/Fail Trac Ticket(s) Comment(s) Date of Test
Software release::Candidate Build stream::8.2 Build number::760 PassFail::Pass ,|x| #x}} Comments:: Created::


Software release::Candidate Build stream::8.2 Build number::762 PassFail::Pass ,|x| #x}} Comments:: Created::


Software release::Candidate Build stream::8.2 Build number::766 PassFail::Pass ,|x| #x}} Comments::Signed upgrade, fine both ways. Created::


Software release::Candidate Build stream::8.2 Build number::766 PassFail::Pass ,|x| #x}} Comments::olpc-upgrade candidate-766 lookin' good! Created::


Software release::Candidate Build stream::8.2 Build number::767 PassFail::Pass ,|x| #x}} Comments::used an XO that was usb upgraded from 656 to 767 and an XO clean installed with 767. worked great on mesh channel 11 Created::


Software release::Candidate Build stream::8.2 Build number::767 PassFail::Pass ,|x| #x}} Comments::using two copy-nand clean installed gg-767-4 machines on channel 6, worked great. Created::


Software release::8.2.0 (767) Build stream::8.2 Build number::767 PassFail::Pass ,|x| #x}} Comments::smoke testing new firmware q2e21, activity worked on both mesh11 and ml1cc. Created::2008/11/05


Retrieved from "http://wiki.laptop.org/mediawiki/index.php?title=Tests/SmokeTest/Distance&oldid=252716"