OLE Nepal/Deployment guide: Difference between revisions

From OLPC
Jump to navigation Jump to search
No edit summary
 
(65 intermediate revisions by the same user not shown)
Line 1: Line 1:
*'''[[OLE_Nepal/Deployment_guide/Logistics|LOGISTICS]]'''
==LOGISTICS==
<br />
# If possible, count the number of XO's at the airport and note any physical damage
*'''[[OLE_Nepal/Deployment_guide/Support_and_Maintenance|SUPPORT AND MAINTENANCE]]'''
# Transport XO's to storage area
<br />
# Write the serial number with a marker at the underside of the XO. The serial number can be found after removing the battery. (e.g SHF8060099D)
*'''[[OLE_Nepal/Deployment_guide/Training|TRAINING]]'''
# Assign a label to the XO (e.g OLEN.XO.1) make sure that both the label and the serial number has been noted in paper.
<br />
#* You can use a marker and a tape to stick the label at the front of the XO.
*'''[[OLE_Nepal/Deployment_guide/Connectivity|CONNECTIVITY]]'''
#* The label is best put in the green cover on top of the screen, between the two antennas.
<br />
# Laptops should be kept systematically with a certain range of XO's in a certain shelf. (e.g OLEN.XO.1 - OLEN.XO.10 should be kept in the same shelf)
*'''[[OLE_Nepal/Deployment_guide/Customizing|CUSTOMIZATION]]'''
# Activate all laptops. (http://wiki.laptop.org/go/Activation_and_Developer_Keys#Getting_devkey_data_via_USB_stick)
<br />
# Power up a laptop and hit the ESC key to enter forth. Type "test-all". This will test all components of the laptop.
*'''[[OLE_Nepal/Deployment_guide/Power|POWER]]'''
# If there is a bad component write that the laptop is bad and the name of the bad component beside the label using a red marker and a piece of tape.
<br />
# At the OK prompt, type "change-tag LO ne_NP.UTF-8" to change the locale to Nepali.
*'''[[OLE_Nepal/Deployment_guide/Content_Development|CONTENT DEVELOPMENT]]'''
# To update firmware type "flash u:\XXXX" where XXXX is the filename including the extension of the firmware.
<br />
# To install the image, put the customized image (osXXX.img) and the crc file (osXXX.crc) at the root of the USB key.
*'''[[OLE_Nepal/Deployment_guide/Timeline|TIMELINE]]'''
# Plug in the USB key and when in forth, type "copy-nand flash u:\osXXX.img". The process will be over in a couple of minutes.
=== Use Traditional Nepali unicode in your XO ===
* To change the keyboard setting so that you can type in both English and Nepali. Here's what I did -Pradosh<br>
* sudo vi /etc/sysconfig/keyboard
* change<br>
XKB_MODEL="olpc"
XKB_LAYOUT="us"
XKB_VARIANT="olpc"
KEYTABLE="us"
to<br>

XKB_MODEL="olpc"
XKB_LAYOUT="us,np"
XKB_VARIANT="olpc2,olpc"
KEYTABLE="us"

* You can now change the the language in which you type with the multiplication/divide button
* To change the keyboard layout to Nepali Traditional type "sudo vi /usr/share/X11/xkb/symbols/np"
* Change the file to
// $XKeyboardConfig: xkeyboard-config/symbols/np,v 1.3 2007-11-21 22:53:38 svu Exp $
// based on a keyboard map from an 'xkb/symbols/dev' file
// $XFree86: xc/programs/xkbcomp/symbols/pc/dev,v 1.2 2002/11/22 04:03:28 dawes Exp $
partial default alphanumeric_keys
xkb_symbols "basic" {
name[Group1]= "Nepal";
// `,1,2,3,4,5,6,7,8,9,0,-,=
key <TLDE> { [ 0x100093D,0x100093C ] };
key <AE01> { [ 0x1000967 ] };
key <AE02> { [ 0x1000968 ] };
key <AE03> { [ 0x1000969 ] };
key <AE04> { [ 0x100096A ] };
key <AE05> { [ 0x100096B ] };
key <AE06> { [ 0x100096C ] };
key <AE07> { [ 0x100096D ] };
key <AE08> { [ 0x100096e ] };
key <AE09> { [ 0x100096F ] };
key <AE10> { [ 0x1000966,0x1000970 ] };
key <AE11> { [ minus, 0x1000952 ] };
key <AE12> { [ equal, 0x100200C ] };
// q,w,e,r,t,y,u,i,o,p,[,]
key <AD01> { [ 0x100091F, 0x1000920 ] };
key <AD02> { [ 0x100094C, 0x1000914 ] };
key <AD03> { [ 0x1000947, 0x1000948 ] };
key <AD04> { [ 0x1000930, 0x1000943 ] };
key <AD05> { [ 0x1000924, 0x1000925 ] };
key <AD06> { [ 0x100092F, 0x100091E ] };
key <AD07> { [ 0x1000941, 0x1000942 ] };
key <AD08> { [ 0x100093F, 0x1000940 ] };
key <AD09> { [ 0x100094B, 0x1000913 ] };
key <AD10> { [ 0x100092A, 0x100092B ] };
key <AD11> { [ 0x1000907, 0x1000908 ] };
key <AD12> { [ 0x100090F, 0x1000910 ] };
// a,s,d,f,g,h,j,k,l,;,',Backslash
key <AC01> { [ 0x100093E, 0x1000906 ] };
key <AC02> { [ 0x1000938, 0x1000936 ] };
key <AC03> { [ 0x1000926, 0x1000927 ] };
key <AC04> { [ 0x1000909, 0x100090A ] };
key <AC05> { [ 0x1000917, 0x1000918 ] };
key <AC06> { [ 0x1000939, 0x1000905 ] };
key <AC07> { [ 0x100091C, 0x100091D ] };
key <AC08> { [ 0x1000915, 0x1000916 ] };
key <AC09> { [ 0x1000932, 0x1000933 ] };
key <AC10> { [ semicolon, colon ] };
key <AC11> { [ quoteright, quotedbl ] };
key <BKSL> { [ 0x1000950, 0x1000903 ] };
// z,x,c,v,b,n,m,,,.,/
key <AB01> { [ 0x1000937, 0x100090B ] };
key <AB02> { [ 0x1000921, 0x1000922 ] };
key <AB03> { [ 0x100091B, 0x100091A ] };
key <AB04> { [ 0x1000935, 0x1000901 ] };
key <AB05> { [ 0x100092C, 0x100092D ] };
key <AB06> { [ 0x1000928, 0x1000923 ] };
key <AB07> { [ 0x100092E, 0x1000902 ] };
key <AB08> { [ comma, 0x1000919 ] };
key <AB09> { [ 0x1000964, 0x1000965 ] };
key <AB10> { [ 0x100094D, question ] };
};
partial alphanumeric_keys
xkb_symbols "olpc" {
// Contact: Walter Bender <walter@laptop.org>
include "np"
key <TLDE> { [ 0x100091E, 0x1000965 ] }; // NYA; double danda
key <AE01> { [ 0x1000967, JA_VIRAMA_NYA ] }; // Nepali digit one; U091C+U094D+U091E
key <AE02> { [ 0x1000968, 0x1000908 ] }; // Nepali digit two;
key <AE03> { [ 0x1000969, 0x1000918 ] }; // Nepali digit three;
key <AE04> { [ 0x100096A, DA_VIRAMA_DHA ] }; // Nepali digit four; U0926+U094D+U0927
key <AE05> { [ 0x100096B, 0x100091B ] }; // Nepali digit five
key <AE06> { [ 0x100096C, 0x100091F ] }; // Nepali digit six
key <AE07> { [ 0x100096D, 0x1000920 ] }; // Nepali digit seven
key <AE08> { [ 0x100096e, 0x1000921 ] }; // Nepali digit eight
key <AE09> { [ 0x100096F, 0x1000922 ] }; // Nepali digit nine
key <AE10> { [ 0x1000966, 0x1000923 ] }; // Nepali digit zero
key <AE11> { [ 0x1000913, 0x1000914 ] }; // O, AU
key <AE12> { [ 0x100200C, 0x1000902 ] }; // ZERO-WIDTH-NON-JOINER (ZWNJ); SIGN ANUSVARA
key <AC12> { [ 0x100094D, 0x100200D ] }; // SIGN VIRAMA; ZERO-WIDTH-JOINER (ZWJ)
key <AD01> { [ TA_VIRAMA_RA, TA_VIRAMA_TA ] }; // U0924+U094D+U0930; U0924+U094D+U0924
key <AD02> { [ 0x1000927, DDA_VIRAMA_DDHA ] }; // DHA; U0921+U094D+U0922
key <AD03> { [ 0x100092D, 0x1000910 ] }; // BHA, AI
key <AD04> { [ 0x100091A, DA_VIRAMA_VA ] }; // CA; U0926+U094D+U0935
key <AD05> { [ 0x1000924, E_VIRAMA_E ] }; // TA; U091F+U094D+U091F
key <AD06> { [ 0x1000925, TTHA_VIRAMA_TTHA ] }; // THA; U0920+U094D+U0920
key <AD07> { [ 0x1000917, 0x100090A ] }; // GA, UU
key <AD08> { [ 0x1000937, KA_VIRAMA_SSA ] }; // SSA; U0915+U094D+U0937
key <AD09> { [ 0x100092F, 0x1000907 ] }; // YA, I
key <AD10> { [ 0x1000909, 0x100090F ] }; // U, E
key <AD11> { [ RA_VIRAMA_ZWJ, 0x1000943 ] }; // U0928+U094D+ZWJ; VOWEL SIGN VOCALIC R
key <AD12> { [ 0x1000947, 0x1000948 ] }; // SIGN E; SIGN AI
key <AC01> { [ 0x100092C, 0x1000906 ] }; // BA, AA
key <AC02> { [ 0x1000915, NGA_VIRAMA_KA ] }; // KA; U0919+U094D+U0915
key <AC03> { [ 0x100092E, NGA_VIRAMA_GA ] }; // MA; U0919+U094D+U0917
key <AC04> { [ 0x1000901, 0x100093E ] }; // CANDRABINDU, VOWEL SIGN AA
key <AC05> { [ 0x1000928, DA_VIRAMA_DA ] }; // NA; U0926+U094D+U0926
key <AC06> { [ 0x100091C, 0x100091D ] }; // JA, JHA
key <AC07> { [ 0x1000935, 0x100094B ] }; // VA, VOWEL SIGN O
key <AC08> { [ 0x100092A, 0x100092B ] }; // PA, PHA
key <AC09> { [ 0x100093F, 0x1000940 ] }; // VOWEL SIGN I, VOWEL SIGN II
key <AC10> { [ 0x1000938, TTA_VIRAMA_TTHA ] }; // SA; U091F+U094D+U0920
key <AC11> { [ 0x1000941, 0x1000942 ] }; // VOWEL SIGN U, VOWEL SIGN UU
key <AB01> { [ 0x1000936, KA_VIRAMA_KA ] }; // SHA; U0915+U094D+U0915
key <AB02> { [ 0x1000939, HA_VIRAMA_YA ] }; // HA; U0939+U094D+U092F
key <AB03> { [ 0x1000905, U_R ] }; // A; U0909+U090B
key <AB04> { [ 0x1000916, 0x1000950 ] }; // KHA, OM
key <AB05> { [ 0x1000926, 0x100094C ] }; // DA, VOWEL SIGN AU
key <AB06> { [ 0x1000932, DA_VIRAMA_YA ] }; // LA; U0926+U094D+U092F
key <AB07> { [ 0x1000903, DDA_VIRAMA_DDA ] }; // SIGN VISARGA; U0921+U094D+U0921
key <AB08> { [ 0x100093D, 0x1000919 ] }; // SIGN AVAGRHA; NGA
key <AB09> { [ 0x1000964, SHA_VIRAMA_RA ] }; // DANDA; U0936+U094D+U0930
key <AB10> { [ 0x1000930, RA_U ] }; // RA; U0930+U0941
include "group(olpc)"
};
* Reboot your XO and use the Multiplication/Division key to change input language

==SUPPORT AND MAINTENANCE==
# Familiarize yourself with disassembling the laptop, replacing parts etc.
#*http://wiki.laptop.org/go/Repair
#*http://wiki.laptop.org/go/Disassembly
# Always carry a USB customization key with the customized image and individual activities.

Who do we train for local support?<br>
Training given to local support?<br>
Tools given to local support?<br>
Spare parts/ extra laptops given to local support?<br>
How often do maintenance teams visit the school?<br>

==TEACHER TRAINING==
# http://wiki.laptop.org/go/Nepal:_Teacher_Training

materials required for teacher training? (multiplugs, xo's, board etc)<br>
feedback of teachers from the previous teacher training?<br>
training of the trainers?<br>

==TRAINERS TRAINING==
==RECRUITING AND TRAINING INTERNS==
# A basic understanding of Linux and some commands is vital. A good guide is the Rute User's Tutorial and Exposition by Paul Sheer. http://rute.2038bug.com/index.html.gz.
# Interns must be familiar with disassembling and reassembling the laptop along with replacing and testing components etc.
# Interns should be independent and capable of using the internet and other sources to find solutions as far as possible.
# Interns should be familiar with the E-Paath software along with other activities that are to be included in the deployment.
# Interns should know how to add/remove individual activities, install an image, add/remove fonts and other basic.
# Interns should create a 'Hello World Activity' in sugar.

Other training to interns?<br>
Recruiting interns?<br>
Plans for the (stress lab)?<br>
A training plan for interns?

==CONNECTIVITY==
# http://wiki.laptop.org/go/Nepal:_Technical_Details#Networking

required materials/software?
time taken to set up?
concept of the network?

==CUSTOMIZING XO'S==
==INTEGRATION==
==POWER==
# http://wiki.laptop.org/go/Nepal:_Technical_Details#Power_Systems

Power available to school?<br>
Current xo power consumption?<br>
Number of sockets required per classroom? or charging rack?<br>
Coping with load shedding and power spikes?<br>
Power required for the school server?<br>

==CONTENT DEVELOPMENT==
# http://wiki.laptop.org/go/Nepal:_Content_Development

Number of people involved?<br>
Number of activities per time (eg per month)?<br>
Activity details? Activity platform? Flash? Squeak?<br>

Latest revision as of 10:13, 11 December 2008








Retrieved from "http://wiki.laptop.org/mediawiki/index.php?title=OLE_Nepal/Deployment_guide&oldid=185806"