OLE Nepal/Deployment guide: Difference between revisions

From OLPC
Jump to navigation Jump to search
No edit summary
 
(60 intermediate revisions by the same user not shown)
Line 1: Line 1:
*'''[[OLE_Nepal/Deployment_guide/Logistics|LOGISTICS]]'''
==LOGISTICS==
<br />
# If possible, count the number of XO's at the airport and note any physical damage
*'''[[OLE_Nepal/Deployment_guide/Support_and_Maintenance|SUPPORT AND MAINTENANCE]]'''
# Transport XO's to storage area
<br />
# Write the serial number with a marker at the underside of the XO. The serial number can be found after removing the battery. (e.g SHF8060099D)
*'''[[OLE_Nepal/Deployment_guide/Training|TRAINING]]'''
# Assign a label to the XO (e.g OLEN.XO.1) make sure that both the label and the serial number has been noted in paper.
<br />
#* You can use a marker and a tape to stick the label at the front of the XO.
*'''[[OLE_Nepal/Deployment_guide/Connectivity|CONNECTIVITY]]'''
#* The label is best put in the green cover on top of the screen, between the two antennas.
<br />
# Laptops should be kept systematically with a certain range of XO's in a certain shelf. (e.g OLEN.XO.1 - OLEN.XO.10 should be kept in the same shelf)
*'''[[OLE_Nepal/Deployment_guide/Customizing|CUSTOMIZATION]]'''
# Activate all laptops. (http://wiki.laptop.org/go/Activation_and_Developer_Keys#Getting_devkey_data_via_USB_stick)
<br />
# Power up a laptop and hit the ESC key to enter forth. Type "test-all". This will test all components of the laptop.
*'''[[OLE_Nepal/Deployment_guide/Power|POWER]]'''
# If there is a bad component write that the laptop is bad and the name of the bad component beside the label using a red marker and a piece of tape.
<br />
# At the OK prompt, type "change-tag LO ne_NP.UTF-8" to change the locale to Nepali.
*'''[[OLE_Nepal/Deployment_guide/Content_Development|CONTENT DEVELOPMENT]]'''
=== Update firmware/ Install image ===
<br />
# To update firmware type "flash u:\XXXX" where XXXX is the filename including the extension of the firmware.
*'''[[OLE_Nepal/Deployment_guide/Timeline|TIMELINE]]'''
# This will erase all the files currently stored in your XO. To install the image, put the customized image (osXXX.img) and the crc file (osXXX.crc) at the root of the USB key.
# Plug in the USB key and when in forth, type "copy-nand flash u:\osXXX.img". The process will be over in a couple of minutes.
=== Use Traditional Nepali unicode in your XO ===
To change the keyboard setting so that you can type in both English and Nepali. Here's what I did: --[[User:Pradosh|Pradosh]]<br>
* sudo vi /etc/sysconfig/keyboard
* change<br>
XKB_MODEL="olpc"
XKB_LAYOUT="us"
XKB_VARIANT="olpc"
KEYTABLE="us"
to<br>

XKB_MODEL="olpc"
XKB_LAYOUT="us,np"
XKB_VARIANT="olpc2,olpc"
KEYTABLE="us"

* You can now change the the language in which you type with the multiplication/divide button
* To change the keyboard layout to Nepali Traditional type "sudo vi /usr/share/X11/xkb/symbols/np"
* Change the file to
// $XKeyboardConfig: xkeyboard-config/symbols/np,v 1.3 2007-11-21 22:53:38 svu Exp $
// based on a keyboard map from an 'xkb/symbols/dev' file
// $XFree86: xc/programs/xkbcomp/symbols/pc/dev,v 1.2 2002/11/22 04:03:28 dawes Exp $
partial default alphanumeric_keys
xkb_symbols "basic" {
name[Group1]= "Nepal";
// `,1,2,3,4,5,6,7,8,9,0,-,=
key <TLDE> { [ 0x100093D,0x100093C ] };
key <AE01> { [ 0x1000967 ] };
key <AE02> { [ 0x1000968 ] };
key <AE03> { [ 0x1000969 ] };
key <AE04> { [ 0x100096A ] };
key <AE05> { [ 0x100096B ] };
key <AE06> { [ 0x100096C ] };
key <AE07> { [ 0x100096D ] };
key <AE08> { [ 0x100096e ] };
key <AE09> { [ 0x100096F ] };
key <AE10> { [ 0x1000966,0x1000970 ] };
key <AE11> { [ minus, 0x1000952 ] };
key <AE12> { [ equal, 0x100200C ] };
// q,w,e,r,t,y,u,i,o,p,[,]
key <AD01> { [ 0x100091F, 0x1000920 ] };
key <AD02> { [ 0x100094C, 0x1000914 ] };
key <AD03> { [ 0x1000947, 0x1000948 ] };
key <AD04> { [ 0x1000930, 0x1000943 ] };
key <AD05> { [ 0x1000924, 0x1000925 ] };
key <AD06> { [ 0x100092F, 0x100091E ] };
key <AD07> { [ 0x1000941, 0x1000942 ] };
key <AD08> { [ 0x100093F, 0x1000940 ] };
key <AD09> { [ 0x100094B, 0x1000913 ] };
key <AD10> { [ 0x100092A, 0x100092B ] };
key <AD11> { [ 0x1000907, 0x1000908 ] };
key <AD12> { [ 0x100090F, 0x1000910 ] };
// a,s,d,f,g,h,j,k,l,;,',Backslash
key <AC01> { [ 0x100093E, 0x1000906 ] };
key <AC02> { [ 0x1000938, 0x1000936 ] };
key <AC03> { [ 0x1000926, 0x1000927 ] };
key <AC04> { [ 0x1000909, 0x100090A ] };
key <AC05> { [ 0x1000917, 0x1000918 ] };
key <AC06> { [ 0x1000939, 0x1000905 ] };
key <AC07> { [ 0x100091C, 0x100091D ] };
key <AC08> { [ 0x1000915, 0x1000916 ] };
key <AC09> { [ 0x1000932, 0x1000933 ] };
key <AC10> { [ semicolon, colon ] };
key <AC11> { [ quoteright, quotedbl ] };
key <BKSL> { [ 0x1000950, 0x1000903 ] };
// z,x,c,v,b,n,m,,,.,/
key <AB01> { [ 0x1000937, 0x100090B ] };
key <AB02> { [ 0x1000921, 0x1000922 ] };
key <AB03> { [ 0x100091B, 0x100091A ] };
key <AB04> { [ 0x1000935, 0x1000901 ] };
key <AB05> { [ 0x100092C, 0x100092D ] };
key <AB06> { [ 0x1000928, 0x1000923 ] };
key <AB07> { [ 0x100092E, 0x1000902 ] };
key <AB08> { [ comma, 0x1000919 ] };
key <AB09> { [ 0x1000964, 0x1000965 ] };
key <AB10> { [ 0x100094D, question ] };
};
partial alphanumeric_keys
xkb_symbols "olpc" {
// Contact: Walter Bender <walter@laptop.org>
include "np"
key <TLDE> { [ 0x100091E, 0x1000965 ] }; // NYA; double danda
key <AE01> { [ 0x1000967, JA_VIRAMA_NYA ] }; // Nepali digit one; U091C+U094D+U091E
key <AE02> { [ 0x1000968, 0x1000908 ] }; // Nepali digit two;
key <AE03> { [ 0x1000969, 0x1000918 ] }; // Nepali digit three;
key <AE04> { [ 0x100096A, DA_VIRAMA_DHA ] }; // Nepali digit four; U0926+U094D+U0927
key <AE05> { [ 0x100096B, 0x100091B ] }; // Nepali digit five
key <AE06> { [ 0x100096C, 0x100091F ] }; // Nepali digit six
key <AE07> { [ 0x100096D, 0x1000920 ] }; // Nepali digit seven
key <AE08> { [ 0x100096e, 0x1000921 ] }; // Nepali digit eight
key <AE09> { [ 0x100096F, 0x1000922 ] }; // Nepali digit nine
key <AE10> { [ 0x1000966, 0x1000923 ] }; // Nepali digit zero
key <AE11> { [ 0x1000913, 0x1000914 ] }; // O, AU
key <AE12> { [ 0x100200C, 0x1000902 ] }; // ZERO-WIDTH-NON-JOINER (ZWNJ); SIGN ANUSVARA
key <AC12> { [ 0x100094D, 0x100200D ] }; // SIGN VIRAMA; ZERO-WIDTH-JOINER (ZWJ)
key <AD01> { [ TA_VIRAMA_RA, TA_VIRAMA_TA ] }; // U0924+U094D+U0930; U0924+U094D+U0924
key <AD02> { [ 0x1000927, DDA_VIRAMA_DDHA ] }; // DHA; U0921+U094D+U0922
key <AD03> { [ 0x100092D, 0x1000910 ] }; // BHA, AI
key <AD04> { [ 0x100091A, DA_VIRAMA_VA ] }; // CA; U0926+U094D+U0935
key <AD05> { [ 0x1000924, E_VIRAMA_E ] }; // TA; U091F+U094D+U091F
key <AD06> { [ 0x1000925, TTHA_VIRAMA_TTHA ] }; // THA; U0920+U094D+U0920
key <AD07> { [ 0x1000917, 0x100090A ] }; // GA, UU
key <AD08> { [ 0x1000937, KA_VIRAMA_SSA ] }; // SSA; U0915+U094D+U0937
key <AD09> { [ 0x100092F, 0x1000907 ] }; // YA, I
key <AD10> { [ 0x1000909, 0x100090F ] }; // U, E
key <AD11> { [ RA_VIRAMA_ZWJ, 0x1000943 ] }; // U0928+U094D+ZWJ; VOWEL SIGN VOCALIC R
key <AD12> { [ 0x1000947, 0x1000948 ] }; // SIGN E; SIGN AI
key <AC01> { [ 0x100092C, 0x1000906 ] }; // BA, AA
key <AC02> { [ 0x1000915, NGA_VIRAMA_KA ] }; // KA; U0919+U094D+U0915
key <AC03> { [ 0x100092E, NGA_VIRAMA_GA ] }; // MA; U0919+U094D+U0917
key <AC04> { [ 0x1000901, 0x100093E ] }; // CANDRABINDU, VOWEL SIGN AA
key <AC05> { [ 0x1000928, DA_VIRAMA_DA ] }; // NA; U0926+U094D+U0926
key <AC06> { [ 0x100091C, 0x100091D ] }; // JA, JHA
key <AC07> { [ 0x1000935, 0x100094B ] }; // VA, VOWEL SIGN O
key <AC08> { [ 0x100092A, 0x100092B ] }; // PA, PHA
key <AC09> { [ 0x100093F, 0x1000940 ] }; // VOWEL SIGN I, VOWEL SIGN II
key <AC10> { [ 0x1000938, TTA_VIRAMA_TTHA ] }; // SA; U091F+U094D+U0920
key <AC11> { [ 0x1000941, 0x1000942 ] }; // VOWEL SIGN U, VOWEL SIGN UU
key <AB01> { [ 0x1000936, KA_VIRAMA_KA ] }; // SHA; U0915+U094D+U0915
key <AB02> { [ 0x1000939, HA_VIRAMA_YA ] }; // HA; U0939+U094D+U092F
key <AB03> { [ 0x1000905, U_R ] }; // A; U0909+U090B
key <AB04> { [ 0x1000916, 0x1000950 ] }; // KHA, OM
key <AB05> { [ 0x1000926, 0x100094C ] }; // DA, VOWEL SIGN AU
key <AB06> { [ 0x1000932, DA_VIRAMA_YA ] }; // LA; U0926+U094D+U092F
key <AB07> { [ 0x1000903, DDA_VIRAMA_DDA ] }; // SIGN VISARGA; U0921+U094D+U0921
key <AB08> { [ 0x100093D, 0x1000919 ] }; // SIGN AVAGRHA; NGA
key <AB09> { [ 0x1000964, SHA_VIRAMA_RA ] }; // DANDA; U0936+U094D+U0930
key <AB10> { [ 0x1000930, RA_U ] }; // RA; U0930+U0941
include "group(olpc)"
};
* Reboot your XO and use the Multiplication/Division key to change input language
=== Installing individual activities ===
* Boot your XO
* Open the Terminal Activity
* Insert the USB Key
* type "sugar-install-bundle <path of activity.xo>"

==SUPPORT AND MAINTENANCE==
# Familiarize yourself with disassembling the laptop, replacing parts etc.
#*http://wiki.laptop.org/go/Repair
#*http://wiki.laptop.org/go/Disassembly
# Always carry a USB customization key with the customized image and individual activities.
# Test all components of the XO by typing "test-all" at forth.
# Test individual component of the XO with "test <device-name>" at forth.

Who do we train for local support?<br>
Training given to local support?<br>
Tools given to local support?<br>
Spare parts/ extra laptops given to local support?<br>
How often do maintenance teams visit the school?<br>

==TEACHER TRAINING==
# http://wiki.laptop.org/go/Nepal:_Teacher_Training

materials required for teacher training? (multiplugs, xo's, board etc)<br>
feedback of teachers from the previous teacher training?<br>
training of the trainers?<br>

==TRAINERS TRAINING==
==RECRUITING AND TRAINING INTERNS==
# A basic understanding of Linux and some commands is vital. A good guide is the Rute User's Tutorial and Exposition by Paul Sheer. http://rute.2038bug.com/index.html.gz.
# Interns must be familiar with disassembling and reassembling the laptop along with replacing and testing components etc.
# Interns should be independent and capable of using the internet and other sources to find solutions as far as possible.
# Interns should be familiar with the E-Paath software along with other activities that are to be included in the deployment.
# Interns should know how to add/remove individual activities, install an image, add/remove fonts and other basic.
# Interns should create a 'Hello World Activity' in sugar.

Other training to interns?<br>
Recruiting interns?<br>
Plans for the (stress lab)?<br>
A training plan for interns?

==CONNECTIVITY==
# http://wiki.laptop.org/go/Nepal:_Technical_Details#Networking

required materials/software?
time taken to set up?
concept of the network?

==CUSTOMIZING XO'S==
==INTEGRATION==
==POWER==
# http://wiki.laptop.org/go/Nepal:_Technical_Details#Power_Systems

Power available to school?<br>
Current xo power consumption?<br>
Number of sockets required per classroom? or charging rack?<br>
Coping with load shedding and power spikes?<br>
Power required for the school server?<br>

==CONTENT DEVELOPMENT==
# http://wiki.laptop.org/go/Nepal:_Content_Development

Number of people involved?<br>
Number of activities per time (eg per month)?<br>
Activity details? Activity platform? Flash? Squeak?<br>

Latest revision as of 10:13, 11 December 2008