OLPC Firmware q3a65: Difference between revisions

From OLPC
Jump to navigation Jump to search
(Proper name for Open Firmware)
 
(3 intermediate revisions by one other user not shown)
Line 1: Line 1:
{{draft}}
{{OLPC}}
{{OLPC}}
{{Release Notes}}
{{Release Notes}}
Line 10: Line 9:


Change summary:
Change summary:
*add support for sparse .zd files, decreasing ''fs-update'' time,
*add support for sparse .zd files, decreasing ''fs-update'' time, <trac>10844</trac>,
*disable ''fs-update'' erase step,
*disable ''fs-update'' erase step, <trac>10825</trac>,
*revised ''help'' display,
*revised ''help'' display,


Line 57: Line 56:
== Changes since q3a64 ==
== Changes since q3a64 ==


=== OpenFirmware [http://openbios.org/viewvc/?root=OpenFirmware svn 2186] Built 2011-04-29 21:08:00 ===
=== Open Firmware [http://openbios.org/viewvc/?root=OpenFirmware svn 2194] Built 2011-04-29 21:08:00 ===


* [http://tracker.coreboot.org/trac/openfirmware/changeset/2193 svn 2193] OLPC XO-1.5 - fs-update, remove erase support because it broke NANDblaster. The microSD card is used to hold the received .zd file, and erasing the card erases the file, causing fs-update to see a zero filled file beyond a certain point. This revision tested with sparse .zd files on NANDblaster and fs-update from USB.
* [http://tracker.coreboot.org/trac/openfirmware/changeset/2193 svn 2193] OLPC XO-1.5 - fs-update, remove erase support because it broke NANDblaster. The microSD card is used to hold the received .zd file, and erasing the card erases the file, causing fs-update to see a zero filled file beyond a certain point. This revision tested with sparse .zd files on NANDblaster and fs-update from USB.

Latest revision as of 00:18, 7 October 2012

  This page is monitored by the OLPC team.

OLPC Firmware Release q3a65

Works on XO-1.5 A1, A2, B1, B2, B3, C1, C2 and C3 systems, but does not work on any XO-1 machines.

Download: q3a65.rom

Change summary:

  • add support for sparse .zd files, decreasing fs-update time, <trac>10844</trac>,
  • disable fs-update erase step, <trac>10825</trac>,
  • revised help display,

fs-update sparse .zd files

Sparse .zd files do not include unused filesystem blocks. As a result, installation time for 10.1.3 falls from 14 minutes to 7 minutes ... if the .zd file is processed. Patches to olpc-os-builder are available for future builds.

(There is now an installation time advantage to smaller operating system builds).

fs-update disable erase

In Q3A64 and earlier, fs-update used to erase one 256th of the microSD card before starting to write to the card. This was removed, because it was unnecessary, because some cards did not behave well, and if extended to the whole card it broke NANDblaster.

help

A revised help output:

UPDATES:
 fs-update u:\os1.zd4   Rewrite the OS on internal SD from USB drive
 flash u:\q3a64.rom     Rewrite the firmware from USB drive
 flash ext:\q3a64.rom   Rewrite the firmware from external SD file
DIRECTORY LISTING:
 dir u:\                List USB drive root directory
 dir u:\boot\           List USB drive /boot directory
 dir int:\boot\*.zip    List .zip files in internal SD /boot directory
BOOTING:
 boot                   Start the OS from list of default locations
 printenv boot-device   Show the list of default locations used by boot
 boot u:\test.fth       Start the OS from a specific location
CONFIGURATION VARIABLES FOR BOOTING:
 boot-device  Kernel or boot script paths.  Example: ext:\boot\olpc.fth
 boot-file    Default kernel command line.  Example: console=ttyS0,115200
 ramdisk      Initial RAMDISK path.         Example: int:\boot\initrd.img
MANAGING CONFIGURATION VARIABLES:
 printenv [ <name> ]    Show configuration variables
 setenv <name> <value>  Set configuration variable
 editenv <name>         Edit configuration variable
DIAGNOSTICS:
 test <device-name>     Test device.  Example: test mouse
 test-all               Test all devices that have test routines
 menu                   Graphical interface to selftests
More information: 
 http://wiki.laptop.org/go/OFW_FAQ

Changes since q3a64

Open Firmware svn 2194 Built 2011-04-29 21:08:00

  • svn 2193 OLPC XO-1.5 - fs-update, remove erase support because it broke NANDblaster. The microSD card is used to hold the received .zd file, and erasing the card erases the file, causing fs-update to see a zero filled file beyond a certain point. This revision tested with sparse .zd files on NANDblaster and fs-update from USB.
  • svn 2192 OLPC XO-1.5 - fs-update, add support for sparse .zd files, undo -r2186 meaning of zblocks: parameter, split card erasure to avoid card lockup, and show progress during erasure. SDHCI - erase blocks, wait for card to leave programming state, and ignore spurious data timeout.
  • svn 2191 OLPC - fs-update, -r2190, make radix explicit.
  • svn 2190 OLPC - fs-update was not erasing the whole part, because the image block count, typically a number of 131072-byte blocks, was used as a 512-byte block count in invokation of erase-blocks.
  • svn 2189 OLPC XO-1.5 - "help" output review; avoid mentioning q2c series, use .zd4 file in example, change USB key to USB drive, vertically align comments, drop "boot u:\boot\vmlinuz" as it is unlikely to be used, explain "printenv boot-device" as a new line, expand configuration variable meanings, change "initrd.imz" to "initrd.img", indent URL of OFW_FAQ.
  • svn 2188 stack effect comment for $case example of use.

EC code is version 2.1.0

  • no change

WLAN firmware is Libertas thinfirm 9.0.7.p2

  • no change


Which Firmware Do You Have?

The best method for finding out what firmware version you have on a laptop depends on whether the laptop is secured or not, and what operating state it is in.

Unsecured Laptop

Obtain the Ok prompt, the firmware version is displayed in the startup banner, thus:

 OLPC ..., ... memory installed, ..., S/N SHF7250024D
 OpenFirmware  q3a65 ...   EC Firmware Ver:...
               ^^^^^

You can also obtain the built date:

 ok .built

This is the date and time that this image of the firmware was built by the release engineer.

Secured Laptop

Power up the laptop with the ✓ (check mark) game button held down. You will be asked to Release the game keys to continue. Release the ✓ (check mark) game button and watch carefully. For a short time the startup banner will be displayed, like this:

 OLPC ..., ... memory installed, ..., S/N SHF7250024D
 OpenFirmware  q3a65 ...   EC Firmware Ver:...
               ^^^^^

Alternatively, if the laptop is already booted, go to the Sugar home view, click on the icon at the centre of the screen and select "My Settings" then "About my Computer." The firmware version is displayed there.

Alternatively, in the Terminal activity or a text console, type:

 cat /proc/device-tree/openprom/model

or

 cat /ofw/openprom/model

With certain older firmware versions, if the operating system will not start, and the laptop is secured, you will not be able to obtain the firmware version using the above methods, so our recommendation is to go ahead and upgrade anyway. The procedure is safe and will not do anything if you already have up-to-date firmware.


Installation

When installing new firmware, you must have a well-charged battery and the AC adapter plugged in. The firmware update code will not proceed otherwise. Possible error messages are:

error message how to fix
AC not present plug in the power cord, check the battery LED is on, then try again.
No external power plug in the power cord, check the battery LED is on, then try again,
No battery plug in the battery, check the latches, then try again, or try another battery,
Battery low allow more time for the battery to charge, then try again, or try another battery.

Unsecured Laptop

This section is for unsecured laptops. Most XO-1.5 and XO-1.75 laptops are unsecured. Most developer XO laptops are unsecured. To unsecure your laptop, follow the instructions at Activation and Developer Keys.

You may install using either:

  • a USB drive or SD card,
  • the laptop's internal drive,
  • a network.

Choose one.

Using a USB drive or SD card

  • check the battery is inserted and locked,
  • check that the power cord is in place and the battery indicator is green,
  • insert the USB drive or SD card,
  • turn on the laptop, and get to the 'ok' prompt. See Ok for more detail. You should see:
ok
  • if the downloaded file is on a USB drive, type:
 flash u:\q3a65.rom
  • if the downloaded file is on an external SD card:
 flash sd:\boot\q3a65.rom
  • wait for the laptop to reboot itself,
  • remove the USB drive or SD card.

(Expert users may remove the USB drive after the message "Got firmware" ... at this stage the file has been read and closed.)

Using the laptop internal drive

An alternate method is to download the firmware file to the laptop internal drive and then install from the internal drive.

  • start the laptop,
  • connect to a wireless or wired network,
su
cd /versions/boot/current/boot/
wget http://dev.laptop.org/pub/firmware/q3a65/q3a65.rom
  • check the battery is inserted and locked,
  • check that the power cord is in place and the battery indicator is green,
  • turn on the laptop, and get to the 'ok' prompt. See Ok for more detail. You should see:
ok
  • if the downloaded file is on an XO-1, type:
flash n:\boot\q3a65.rom
  • if the file is on the internal SD card of an XO-1.5 or XO-1.75:
flash int:\boot\q3a65.rom

Using a network

You will need a compatible USB to ethernet adapter, or an open or WEP wireless access point, connected to the internet.

  • check the battery is inserted and locked,
  • check that the power cord is in place and the battery indicator is green,
  • turn on the laptop, and get to the 'ok' prompt. See Ok for more detail. You should see:
ok
  • if using wireless, type the essid of the wireless network:
essid mynetwork
  • if using a WPA wireless access point, type the WPA key for the network:
wpa passphrase
  • type the flash command using the download link above, but change all slash characters so they are backwards, for example:
flash http:\\dev.laptop.org\pub\firmware\q3a65\q3a65.rom

Secured Laptop

Secured laptops can only use flash firmware that has been signed. All mass-production machines had the latest firmware at the time of manufacture.

Upgrading firmware describes how to upgrade to a newer signed firmware release.

See also

  • Cheat codes for information about how game buttons control startup options.