XO-1.75/Kernel/Issues: Difference between revisions
< XO-1.75
Jump to navigation
Jump to search
(the dpm_resume hang was proven to be caused by the serial driver not properly handling suspend and resume, workaround is to remove no_console_suspend) |
|||
(13 intermediate revisions by 2 users not shown) | |||
Line 1: | Line 1: | ||
== hang, |
== hang, SET_BLOCK_COUNT == |
||
This is a hang with |
This is a hang with a repeating message: |
||
mmcblk0: error -110 sending SET_BLOCK_COUNT command, response 0x0, card status 0x700 |
|||
mmp2-pcm-audio mmp2-pcm-audio.0: resume |
|||
<trac>11137</trac> |
|||
No FIQ. No SysRq. Always preceeded by a ''PM: Some devices failed to suspend''. |
|||
<trac>11525</trac> |
|||
<trac>11528</trac> |
|||
Jon Nettleton says known problem. Caused by interrupted suspend, and during the unwind of the resume it hangs. |
|||
Can be worked around by removing the audio driver from the kernel. |
|||
Disabling runin-sound has no effect. |
|||
Seen within half an hour if SUS_TIME is set to 3000. Rarely or never seen if SUS_TIME is set to 10000. |
|||
Theory: once a suspend takes too long, the RTC alarm goes off before suspend has finished, and the suspend is interrupted, leading to this issue. |
|||
Impact: may trigger also with other wake sources, leading to a failed runin. |
|||
Instances: |
|||
* http://dev.laptop.org/~quozl/z/1RiDms.txt |
|||
* http://dev.laptop.org/~quozl/z/1RiEIr.txt |
|||
Might be fixed by http://dev.laptop.org/git/olpc-kernel/commit/?h=arm-3.0-wip-wfi&id=92ef8264199818b91518f7fe7af365c5998381fa |
|||
== hang, mmp2_pm_finish: Enable audio island == |
|||
This is a hang shortly after the serial console message: |
|||
mmp2_pm_finish: Enable audio island |
|||
The time period may vary. |
|||
Only occurs with SUS_TIME not set to 3000. |
|||
Instances: |
|||
* http://dev.laptop.org/~quozl/z/1RiHT6.txt (75.904ms) |
|||
* http://dev.laptop.org/~greenfeld/temp/175bringup/os23-ff199462/screenlog.3-resumehang2ecmod.bz2 (80.341ms) |
|||
* http://dev.laptop.org/~greenfeld/temp/175bringup/os23-26f404e/screenlog.6-resumehang.bz2 (2.683ms) |
|||
* http://dev.laptop.org/~greenfeld/temp/175bringup/os23-26f404e/screenlog.3-ecfail1.bz2 (72.616ms) |
|||
* http://dev.laptop.org/~quozl/z/1Rhvmt.txt |
|||
* http://dev.laptop.org/~quozl/z/1RhvpV.txt |
|||
* http://dev.laptop.org/~quozl/z/1RiK9g.txt (proving it does not require the body of the function) |
Latest revision as of 05:41, 13 January 2012
hang, SET_BLOCK_COUNT
This is a hang with a repeating message:
mmcblk0: error -110 sending SET_BLOCK_COUNT command, response 0x0, card status 0x700
<trac>11137</trac> <trac>11525</trac> <trac>11528</trac>