XO-1.75/Kernel/Issues: Difference between revisions
< XO-1.75
Jump to navigation
Jump to search
(the dpm_resume hang was proven to be caused by the serial driver not properly handling suspend and resume, workaround is to remove no_console_suspend) |
|||
| (One intermediate revision by the same user not shown) | |||
| Line 7: | Line 7: | ||
<trac>11525</trac> |
<trac>11525</trac> |
||
<trac>11528</trac> |
<trac>11528</trac> |
||
== hang, dpm_resume == |
|||
This is a hang shortly after the serial console message: |
|||
mmp2_pm_finish: Enable audio island |
|||
The time period may vary. |
|||
Only seen to occur with olpc-runin-tests in aggressive mode; a ten second awake time, followed by a ten second rtcwake suspend. |
|||
Easily reproduced. |
|||
Instances from previous testing: |
|||
* http://dev.laptop.org/~quozl/z/1RiHT6.txt (75.904ms) |
|||
* http://dev.laptop.org/~greenfeld/temp/175bringup/os23-ff199462/screenlog.3-resumehang2ecmod.bz2 (80.341ms) |
|||
* http://dev.laptop.org/~greenfeld/temp/175bringup/os23-26f404e/screenlog.6-resumehang.bz2 (2.683ms) |
|||
* http://dev.laptop.org/~greenfeld/temp/175bringup/os23-26f404e/screenlog.3-ecfail1.bz2 (72.616ms) |
|||
* http://dev.laptop.org/~quozl/z/1Rhvmt.txt |
|||
* http://dev.laptop.org/~quozl/z/1RhvpV.txt |
|||
* http://dev.laptop.org/~quozl/z/1RiK9g.txt (proving it does not require the body of the function) |
|||
Analysis. |
|||
Tracing the point of hang by gradually adding printk has shown the problem occurs in dpm_resume(), before dpm_complete() is called by dpm_resume_end(). |
|||
Adding a 60ms mdelay() per device within the dpm_resume() function, within the list processing, [http://dev.laptop.org/~quozl/z/1Rijw0.txt patch] has shown results: |
|||
* [http://dev.laptop.org/~quozl/z/1Rijy3.txt C1 SKU201 after 27 suspend cycles], |
|||
* [http://dev.laptop.org/~quozl/z/1RijyO.txt C1 SKU202 after 9 suspend cycles], |
|||
* [http://dev.laptop.org/~quozl/z/1Rim3S.txt C1 SKU202 after 123 suspend cycles], |
|||
* [http://dev.laptop.org/~quozl/z/1Rim4h.txt B1 after 211 suspend cycles], |
|||
* [http://dev.laptop.org/~quozl/z/1Rim62.txt B4 after 137 suspend cycles]. |
|||
* [http://dev.laptop.org/~quozl/z/1RiuZn.txt after 450 suspend cycles]. |
|||
* a B1 that survived 1083 suspend cycles over 12 hours without hitting this. |
|||
* [http://dev.laptop.org/~quozl/z/1Riw5B.txt B1 that slowed right down in dpm_resume()]. |
|||
Note that the elapsed time shows no correlation with the previous instances of the issue ... which suggests that it is the operations being performed rather than the time they are performed. |
|||
James is using the watchdog on six units to capture as many instances of the hang as possible, to help in identifying next step in analysis. Results: |
|||
* 2701 suspend tests, 2571 successful resumes, 130 hung resumes, most frequent last messages before hang were ''mmcblk mmc2:0001: resume'' (49), ''input input9: type resume'' (32), ''input input8: type resume'' (4), |
|||
Latest revision as of 05:41, 13 January 2012
hang, SET_BLOCK_COUNT
This is a hang with a repeating message:
mmcblk0: error -110 sending SET_BLOCK_COUNT command, response 0x0, card status 0x700
<trac>11137</trac> <trac>11525</trac> <trac>11528</trac>