TeleHealth Module: Difference between revisions

From OLPC
Jump to navigation Jump to search
mNo edit summary
(Organization)
 
(49 intermediate revisions by 12 users not shown)
Line 1: Line 1:
#REDIRECT [[TeleHealth_Hardware]]
=The 10usd TeleHealth Module=
* This low cost, multifunction peripheral will provide a means through which the XO can relay valuable medical diagnostic data from the field to doctors many kilometers away.
* It will compose of a three lead EKG providing valuable information about the heart's electrical status, enabling diagnosis of congenital defects and various arrhythmias.
* It will also contain a multipurpose NIR diagnosis tool whose primary function is that of a pulse oximeter, providing information about the oxygen saturation of the blood.
** See nirdiagnositics.com for other NIR functions

== 3 Lead EKG ==
* Multiple Op-Amps pick up, amplify, and filter electrical impulses picked up by near-heart electrodes.
* DyD/DyDisMe has schematics for an EKG using 714 style op-amps.

== NIR Diagnosis Aid ==
* Based on the principles of the differences in absorption of oxygenated and non oxygenated hemoglobin
* 800-1000nm light from LEDs are often used in NIR tools
* Red light is generated from similar LEDs.
** 5-15c ea
* Light is picked up by photodiodes, converted to current.
* This current is amplified and converted to voltage by a MAX4006[http://media.maxim-ic.com/images/qv/3760.gif|MAX4006] or equivalent chip
** 1.275 usd

== ADC/DAC ==
* C8051F321 or equivalent chip
** A/D 5x10b minimum
** This specific chip provides A/D 13x10b
* alternatively a USB micro-controller may communicate with dedicated ADC/DAC chips via PWM, to lower cost.




[[Category:Hardware ideas]]
[[Category:Hardware]]
[[Category:Peripherals]]

Latest revision as of 00:27, 21 January 2008